Volume 43 Issue 3
Mar.  2024
Turn off MathJax
Article Contents
WANG Dongming, SHAN Yicai, MENG Longhui. Numerical Simulation and Experimental Study on Influence of Shot Peening Parameters of 7075 Aluminum Alloy[J]. Mechanical Science and Technology for Aerospace Engineering, 2024, 43(3): 466-473. doi: 10.13433/j.cnki.1003-8728.20220277
Citation: WANG Dongming, SHAN Yicai, MENG Longhui. Numerical Simulation and Experimental Study on Influence of Shot Peening Parameters of 7075 Aluminum Alloy[J]. Mechanical Science and Technology for Aerospace Engineering, 2024, 43(3): 466-473. doi: 10.13433/j.cnki.1003-8728.20220277

Numerical Simulation and Experimental Study on Influence of Shot Peening Parameters of 7075 Aluminum Alloy

doi: 10.13433/j.cnki.1003-8728.20220277
  • Received Date: 2022-02-09
  • Publish Date: 2024-03-25
  • In order to explore the influence of the different shot peening parameters on the shot peening results in the shot peening process of 7075 aluminum alloy, the corresponding shot peening process is simulated via ABAQUS software, and the effects of the different shot peening parameters on the surface residual stress distribution, surface roughness and surface three-dimensional morphology are observed. At the same time, the corresponding shot peening process is studied based on the experimental process, by comparing the simulation and experimental results, it is finally found that although there is a certain gap between the two in specific values, the two show obvious consistency in change trend. Therefore, it can be considered that the analysis results of the two are more reliable. At the same time, it is concluded that under the condition of simply adjusting the projectile size and velocity, it is difficult to give consideration to both the surface residual stress and the surface roughness at the same time, but the improvement of shot peening coverage can better take these two aspects into account at the cost of reducing production efficiency.
  • loading
  • [1]
    LIAO D, ZHU S P, KESHTEGAR B, et al. Probabilistic framework for fatigue life assessment of notched components under size effects[J]. International Journal of Mechanical Sciences, 2020, 181: 105685. doi: 10.1016/j.ijmecsci.2020.105685
    [2]
    ADU-GYAMFI S, REN X D, LARSON E A, et al. The effects of laser shock peening scanning patterns on residual stress distribution and fatigue life of AA2024 aluminium alloy[J]. Optics & Laser Technology, 2018, 108: 177-185.
    [3]
    MALEKI E, UNAL O, KASHYZADEH K R. Efficiency analysis of shot peening parameters on variations of hardness, grain size and residual stress via Taguchi approach[J]. Metals and Materials International, 2019, 25(6): 1436-1447. doi: 10.1007/s12540-019-00290-7
    [4]
    MALEKI E, UNAL O, GUAGLIANO M, et al. Analysing the fatigue behaviour and residual stress relaxation of gradient Nano-structured 316L steel subjected to the shot peening via deep learning approach[J]. Metals and Materials International, 2022, 28(1): 112-131. doi: 10.1007/s12540-021-00995-8
    [5]
    李克, 朱文龙, 宋逸思, 等. 复合喷丸对0Cr16Ni5Mo1马氏体不锈钢表面组织和性能的影响[J]. 理化检验-物理分册, 2021, 57(12): 32-37.

    LI K, ZHU W L, SONG Y S, et al. Effects of composite shot peening on surface microstructure and properties of 0Cr16Ni5Mo1 martensitic stainless steel[J]. PhysicalTesting and Chemical Analysis Part A: Physical Testing, 2021, 57(12): 32-37. (in Chinese)
    [6]
    陈李学, 蒋建军, 李伟刚, 等. 切削工艺对7075铝合金喷丸效果的影响[J]. 材料保护, 2021, 54(11): 104-107. doi: 10.3969/j.issn.1001-1560.2021.11.clbh202111018

    CHEN L X, JIANG J J, LI W G, et al. Effect of cutting process on shot peening of 7075 aluminum alloy[J]. Materials Protection, 2021, 54(11): 104-107. (in Chinese) doi: 10.3969/j.issn.1001-1560.2021.11.clbh202111018
    [7]
    蔡晋, 谢广安, 闫雪, 等. TC4钛合金超声喷丸强化覆盖率试验与数值分析[J]. 航空制造技术, 2021, 64(19): 30-36. doi: 10.16080/j.issn1671-833x.2021.19.030

    CAI J, XIE G A, YAN X, et al. Experimental and numerical analysis of coverage of TC4 titanium alloy by ultrasonic shot peening[J]. Aeronautical Manufacturing Technology, 2021, 64(19): 30-36. (in Chinese) doi: 10.16080/j.issn1671-833x.2021.19.030
    [8]
    SOYAMA H, CHIGHIZOLA C R, HILL M R. Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel[J]. Journal of Materials Processing Technology, 2021, 288: 116877. doi: 10.1016/j.jmatprotec.2020.116877
    [9]
    WU J Z, WEI P T, LIU H J, et al. Effect of shot peening intensity on surface integrity of 18CrNiMo7-6 steel[J]. Surface and Coatings Technology, 2021, 421: 127194. doi: 10.1016/j.surfcoat.2021.127194
    [10]
    MARTÍN V, VÁZQUEZ J, NAVARRO C, et al. Effect of shot peening residual stresses and surface roughness on fretting fatigue strength of Al 7075-T651[J]. Tribology International, 2020, 142: 106004. doi: 10.1016/j.triboint.2019.106004
    [11]
    LIU X, LIU J X, ZUO Z X, et al. Numerical study on residual stress redistribution of shot-peened aluminum 7075-T6 under fretting loading[J]. International Journalof Mechanical Sciences, 2019, 160: 156-164. doi: 10.1016/j.ijmecsci.2019.06.031
    [12]
    MALI R A, AGRAHARI M D, GUPTA T V K. FE based simulation and experimental validation of forces in dry turning of aluminium 7075[J]. Materials Today:Proceedings, 2020, 27: 2319-2323. doi: 10.1016/j.matpr.2019.09.120
    [13]
    XIE L C, ZHANG J, XIONG C B, et al. Investigation on experiments and numerical modelling of the residual stress distribution in deformed surface layer of Ti-6Al-4V after shot peening[J]. Materials & Design, 2012, 41: 314-318.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(16)  / Tables(1)

    Article views (65) PDF downloads(6) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return