[1]
|
王长清, 张毅飞, 郑勇, 等. 钛合金薄壁件切削力与残余应力研究[J]. 重庆理工大学学报(自然科学), 2022, 36(3): 95-104.WANG C Q, ZHANG Y F, ZHENG Y, et al. Study on cutting force and residual stress of titanium alloy thin wall part[J]. Journal of Chongqing University of Technology (Natural Science), 2022, 36(3): 95-104. (in Chinese)
|
[2]
|
王志学, 刘献礼, 李茂月, 等. 考虑力致变形影响的薄壁件铣削多点接触稳定性预测[J]. 机械工程学报, 2022, 58(17): 309-320.WANG Z X, LIU X L, LI M Y, et al. Multi-point contact stability prediction considering force-induced deformation effect in milling thin-Walled Parts[J]. Journal of Mechanical Engineering, 2022, 58(17): 309-320. (in Chinese)
|
[3]
|
李曦, 袁军堂, 汪振华, 等. 基于Rayleigh-Ritz法的钛合金薄壁件非均匀余量加工变形控制研究[J]. 中国机械工程, 2020, 31(11): 1378-1385.LI X, YUAN J T, WANG Z H, et al. Study on deformation control of thin-walled Titanium alloy parts in non-uniform allowance machining based on Rayleigh-Ritz method[J]. China Mechanical Engineering, 2020, 31(11): 1378-1385. (in Chinese)
|
[4]
|
SEDEH M R N, GHAEI A. The effects of machining residual stresses on springback in deformation machining bending mode[J]. The International Journal of Advanced Manufacturing Technology, 2021, 114(3): 1087-1098.
|
[5]
|
WANG Z H, WANG S B, WANG S L, et al. A novel surface residual stress monitoring method based on the power consumption of machine tool: A case study in 5-axis machining[J]. Journal of Manufacturing Processes, 2023, 86: 221-236. doi: 10.1016/j.jmapro.2022.12.057
|
[6]
|
姜建堂, 范丁歌, 赵熊爔, 等. 大型铝合金构件制造全过程残余应力预测与控制[J]. 中国材料进展, 2022, 41(11): 899-908.JIANG J T, FAN D G, ZHAO X X, et al. Whole process prediction-control of residual stress during the manufacturing of large aluminum alloy components[J]. Materials China, 2022, 41(11): 899-908. (in Chinese)
|
[7]
|
WANG Z Y, ZHOU J H, REN J X, et al. Predicting surface residual stress for multi-axis milling of Ti-6Al-4V titanium alloy in combined simulation and experiments[J]. Materials, 2022, 15(18): 6471. doi: 10.3390/ma15186471
|
[8]
|
刘瑶琼, 龚海, 孙燕杰. 7050铝合金厚板弹性模量分布差异及其对预拉伸后残余应力的影响[J]. 热加工工艺, 2019, 48(24): 25-29.LIU Y Q, GONG H, SUN Y J. Distribution difference of elastic modulus of 7050 aluminum alloy thick plate and its influence on residual stress[J]. Hot Working Technology, 2019, 48(24): 25-29. (in Chinese)
|
[9]
|
KOC M, CULP J, ALTAN T. Prediction of residual stresses in quenched aluminum blocks and their reduction through cold working processes[J]. Journal of Materials Processing Technology, 2006, 174(1-3): 342-354. doi: 10.1016/j.jmatprotec.2006.02.007
|
[10]
|
TANNER D A, ROBINSON J S. Residual stress prediction and determination in 7010 aluminum alloy forgings[J]. Experimental Mechanics, 2000, 40(1): 75-82. doi: 10.1007/BF02327551
|
[11]
|
翟瑞志, 尹慧, 滕树满. 大型7050铝合金自由锻件淬火残余应力消减研究[J]. 型铸锻件, 2022(4): 56-58.ZHAI R Z, YIN H, TENG S M. Study on quenching residual stress reduction of large free forgings of aluminum alloy 7050[J]. Heavy Casting and Forging, 2022(4): 56-58. (in Chinese)
|
[12]
|
李晨, 张新全, 谢林军, 等. 淬火水温对7050铝合金残余应力及力学性能的影响[J]. 轻合金加工技术, 2022, 50(5): 60-64.LI C, ZHANG X Q, XIE L J, et al. Effect of water quenching temperature on residual stress and mechanical properties of 7050 aluminum alloy[J]. Light Alloy Fabrication Technology, 2022, 50(5): 60-64. (in Chinese)
|
[13]
|
GUO H, ZUO D W, WU H B, et al. Prediction on milling distortion for aero-multi-frame parts[J]. Materials Science and Engineering: A, 2009, 499(1-2): 230-233.
|
[14]
|
RAI J K, XIROUCHAKIS P. Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components[J]. International Journal of Machine Tools and Manufacture, 2008, 48(6): 629-643.
|
[15]
|
王祝堂, 田荣璋. 铝合金及其加工手册[M]. 长沙: 中南工业大学出版社, 1989.WANG Z T, TIAN R Z. Aluminum alloy and handbook of machining[M]. Changsha: Central South University of Technology Press, 1989. (in Chinese)
|
[16]
|
TANNER D A, ROBINSON J S. Modelling stress reduction techniques of cold compression and stretching in wrought aluminium alloy products[J]. Finite Elements in Analysis and Design, 2003, 39(5-6): 369-386.
|
[17]
|
李利. 铝合金板淬火残余应力的拉伸消除方法[J]. 轻合金加工技术, 1999, 27(5): 16-18.LI L. Stretch method to relieve residual stress in a aluminium alloy plate[J]. Light Alloy Fabrication Technology, 1999, 27(5): 16-18. (in Chinese)
|
[18]
|
吴红兵. 航空框类整体结构件铣削加工变形的数值模拟与实验研究[D]. 杭州: 浙江大学, 2008.WU H B. Study on numerical simulation and experiment of milling process for aerospace monolithic components[D]. Hangzhou: Zhejiang University, 2008. (in Chinese)
|
[19]
|
郭魂. 航空多框整体结构件铣削变形机理与预测分析研究[D]. 南京: 南京航空航天大学, 2005.GUO H. Study on mechanism and prediction analysis of machining distortion for aero-multi-frame monolithic structure parts[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2005. (in Chinese)
|
[20]
|
徐飞飞. 整体薄壁结构件残余应力预测与铣削加工变形研究[D]. 大连: 大连理工大学, 2010.XU F F. Study on prediction of residual stress and machining distortion for monolithic thin-walled structural components[D]. Dalian: Dalian University of Technology, 2010. (in Chinese)
|
[21]
|
董辉跃, 柯映林, 孙杰, 等. 铝合金厚板淬火残余应力的有限元模拟及其对加工变形的影响[J]. 航空学报, 2004, 25(4): 429-432.DONG H Y, KE Y L, SUN J, et al. Finite element method simulation for residual stress in quenched aluminum alloy thick-plate and its effect on machining distortion[J]. Acta Aeronautica et Astronautica Sinica, 2004, 25(4): 429-432. (in Chinese)
|