[1]
|
Trampert S, Gocmez T, Pischinger S. Thermomechanical fatigue life prediction of cylinder heads in combustion engines[J]. Journal of Engineering for Gas Turbines and Power, 2008,130(1):12806
|
[2]
|
Mikami S, Ogino K, Sorazawa M. Development of evaluation method for low-cycle fatigue breakdown on hsdi diesel cylinder head[C]//Proceedings of SAE 2010 World Congress & Exhibition. Detroit, Michigan:SAE, 2010
|
[3]
|
魏鑫.缸盖冷却水腔局部结构对疲劳强度的影响研究[D].杭州:浙江大学,2016 Wei X. Research on the effect of local structure of cylinder head cooling jacket on fatigue strength[D]. Hangzhou:Zhejiang University, 2016(in Chinese)
|
[4]
|
汪绍斌.冷却水参数对缸盖热疲劳模拟试验热状态的影响研究[D].杭州:浙江大学,2016 Wang S B. Research on the influence of cooling water parameters on the thermal status of cylinder head in the thermal fatigue simulation test[D]. Hangzhou:Zhejiang University, 2016(in Chinese)
|
[5]
|
Ghasemi A. Cylinder head high/low cycle fatigue CAE analysis[C]//Proceedings of SAE 2012 Commercial Vehicle Engineering Congress. Rosemont, Illinois:SAE, 2012
|
[6]
|
Rathnaraj J D, Wessley G J J, Rai R S. Automatic structural optimization of engine components using HCF and TMF failure analysis and optimization models[C]//Proceedings of International Conference on Advances in Mechanical Engineering. Kerala:AMAE, 2010:15-17
|
[7]
|
Osterwisch C, Dejack M, Smolnikar M. CAE process for developing cylinder head design including statistical correlation and shape optimization[C]//Proceedings of SAE 2010 World Congress & Exhibition. Detroit, Michigan:SAE, 2010
|
[8]
|
邓帮林,刘敬平,杨靖,等.某缸盖热机疲劳分析[J].湖南大学学报(自然科学版),2012,39(2):30-34 Deng B L, Liu J P, Yang J, et al. The thermal mechanical fatigue analysis on a cylinder head[J]. Journal of Hunan University (Natural Sciences), 2012,39(2):30-34(in Chinese)
|
[9]
|
党娟.基于热-流-固耦合的气缸盖疲劳寿命预测方法研究[D].太原:中北大学,2015 Dang J. Based on the thermal-fluid-mechanical coupling analysis of fatigue life prediction of cylinder head and research[D]. Taiyuan:North University of China, 2015(in Chinese)
|
[10]
|
张晓奇,吴坚,曾志新,等.某四缸汽油机气缸盖气缸体组合结构有限元分析[J].机械科学与技术,2015,34(1):32-36 Zhang X Q, Wu J, Zeng Z X, et al. Finite element analysis of the combination structures for cylinder head and block of a four-cylinder gasoline engine[J]. Mechanical Science and Technology for Aerospace Engineering, 2015,34(1):32-36(in Chinese)
|
[11]
|
戴鑫鑫.发动机气缸盖内复杂流动与传热的仿真研究[D].北京:北京交通大学,2008 Dai X X. Investigation on simulation of complex flow and heat transfer in an engine cylinder head[D]. Beijing:Beijing Jiaotong University, 2008(in Chinese)
|
[12]
|
闫理贵.缸盖内沸腾传热流固耦合模拟及其可靠性研究[D].济南:山东大学,2011 Yan L G. Research on fluid-solid coupling numerical simulation of boiling heat transfer and reliability in cylinder head[D]. Ji'nan:Shandong University, 2011(in Chinese)
|
[13]
|
McKay M D, Beckman R J, Conover W J. Comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J]. Technometrics, 1979,21(2):239-245
|
[14]
|
Jakubek S, Strasser T. Fault-diagnosis using neural networks with ellipsoidal basis functions[C]//Proceedings of the 2002 American Control Conference. Anchorage:IEEE, 2002,5:3846-3851
|
[15]
|
Shen W, Guo X P, Wu C, et al. Forecasting stock indices using radial basis function neural networks optimized by artificial fish swarm algorithm[J]. Knowledge-Based Systems, 2011,24(3):378-385
|