S580B钢中低应变率动态拉伸试验方法及本构表征研究

葛宇静; 白春玉; 惠旭龙; 刘小川

doi:10.13433/j.cnki.1003-8728.2018.0119

S580B钢中低应变率动态拉伸试验方法及本构表征研究

doi: 10.13433/j.cnki.1003-8728.2018.0119

1.
中国飞机强度研究所结构冲击动力学航空科技重点实验室, 西安 710065

详细信息

作者简介:
葛宇静(1989-),助理工程师,硕士,研究方向为结构冲击动力学,yujingge623@163.com

计量
- 文章访问数: 184
- HTML全文浏览量: 44
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2016-10-16
- 刊出日期: 2018-01-15

Dynamic Tension Methods and Constitutive Characterization of S580B Steel at Intermediate and Low Strain Rates

1.
Aviation Key Laboratory of Science and Technology on Structures Impact Dynamics, Aircraft Strength Research Institute of China, Xi'an 710065, China

摘要

摘要: 以S580B钢为研究对象，利用高速液压伺服材料试验机开展了其在中、低应变率范围的动态拉伸试验。提出了一种借助静态标定试验来间接测量动态载荷的方法，通过数字散斑相关方法测量应变场，获得了不同应变率下的真实应力-应变曲线，试验结果显示此材料具有明显的应变硬化效应和应变率敏感性。基于试验数据，采用Johnson-Cook模型拟合得到了S580B钢的动态本构方程，以其作为试验件有限元仿真的材料参数，仿真结果验证了拟合的动态本构方程能够较为准确地表征S580B钢的动态力学特性。
- 中低应变率 /
- 载荷测试 /
- 数字散斑相关方法 /
- 动态力学性能 /
- Johnson-Cook本构模型
Abstract: The dynamic tensile experiments of S580B at intermediate and low strain rates were developed with the high velocity hydraulic servo-testing machine. An indirect method of measuring dynamic load by aid of static calibration experiment was proposed, and the strain field was calculated with digital speckle correlation method. Therefore, the true stress-strain curves at different strain rates were obtained, and the results showed the material behaved apparent strain-hardening effect and strain rate sensitivity. The dynamic constitutive equation of S580B was fitted with Johnson-Cook model and the corresponding material parameters were applied to the finite element simulation of the test specimen, and the simulation result demonstrated the constitutive equation could exactly illustrate dynamic mechanical property of the material.
- intermediate and low strain rates /
- load testing /
- digital speckle correlation method /
- dynamic mechanical property /
- Johnson-Cook constitutive model

HTML全文

参考文献(15)

[1]	李晓红,樊玉光,徐学利,等.X80高屈强比管线钢性能分析与管道安全性预测[J].机械科学与技术,2005,24(9):1074-1076,1096 Li X H, Fan Y G, Xu X L, et al. On mechanical characteristic of high yield ratio X80 pipeline steel and the Safety Forecasting of the Pipeline[J]. Mechanical Science and Technology, 2005,24(9):1074-1076,1096(in Chinese)
[2]	邓高涛,王焕然,陈大年.一种钢板材料动态拉伸本构方程确定以及试件尺度效应研究[J].工程力学,2014,31(1):236-242 Deng G T, Wang H R, Chen D N. Determination of dynamic tensile constitutive equation for steel sheet material and discussion of effects of specimen scale on experimental results[J]. Engineering Mechanics, 2014,31(1):236-242(in Chinese)
[3]	刘盼萍,尹燕,常列珍,等.正火态50SiMnVB钢Johnson-Cook本构方程的建立[J].兵器材料科学与工程,2009,32(1):45-49 Liu P P, Yin Y, Liu L Z, et al. Establishing of Johnson-Cook constitutive equation for normalized steel 50SiMnVB[J]. Ordnance Material Science and Engineering, 2009,32(1):45-49(in Chinese)
[4]	代启锋,宋仁伯,范午言,等.DP1180双相钢在高应变速率变形条件下应变硬化行为及机制[J].金属学报,2012,48(10):1160-1165 Dai Q F, Song R B, Fan W Y, et al. Behaviour and mechanism of strain hardening for dual phase steel DP1180 under high strain rate deformation[J]. Acta Metallurgica Sinica, 2012,48(10):1160-1165(in Chinese)
[5]	武海军,姚伟,黄风雷,等.超高强度钢30CrMnSiNi2A动态力学性能实验研究[J].北京理工大学学报,2010,30(3):258-262 Wu H J, Yao W, Huang F L, et al. Experimental study on dynamic mechanical properties of ultrahigh strength 30CrMnSiNi2A steel[J]. Transactions of Beijing Institute of Technology, 2010,30(3):258-262(in Chinese)
[6]	韦习成,谢群,符仁钰,等.HSLA TRIP钢的动态拉伸行为及其模拟[J].材料研究学报,2006,20(5):556-560 Wei X C, Xie Q, Fu R Y, et al. The dynamic tensile behavior of HSLA TRIP steel and its modeling[J]. Chinese Journal of Materials Research, 2006,20(5):556-560(in Chinese)
[7]	白春玉,刘小川,周苏枫,等.中应变率下材料动态拉伸关键参数测试方法[J].爆炸与冲击,2015,35(4):507-512 Bai C Y, Liu X C, Zhou S F, et al. Material key parameters measurement method in the dynamic tensile testing at intermediate strain rates[J]. Explosion and Shock Waves, 2015,35(4):507-512(in Chinese)
[8]	钱利锋,侯英玮.U75V钢流动应力的试验研究[J].锻压技术,2009,34(5):132-135 Qian L F, Hou Y W. Experimental research on flow stress of U75V steel[J]. Forging & Stamping Technology, 2009,34(5):132-135(in Chinese)
[9]	张学峰,夏源明.中应变率材料试验机的研制[J].实验力学,2001,16(1):13-18 Zhang X F, Xia Y M. Development of material testing apparatus for intermediate strain rate test[J]. Journal of Experimental Mechanics, 2001,16(1):13-18(in Chinese)
[10]	Huh H, Kim S B, Song J H, et al. Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body[J]. International Journal of Mechanical Sciences, 2008,50(5):918-931
[11]	Choung J, Nam W, Lee J Y. Dynamic hardening behaviors of various marine structural steels considering dependencies on strain rate and temperature[J]. Marine Structures, 2013,32:49-67
[12]	董丹阳,刘杨,王磊,等.应变速率对DP780钢动态拉伸变形行为的影响[J].金属学报,2013,49(2):159-166 Dong D Y, Liu Y, Wang L, et al. Effect of strain rate on dynamic deformation behavior of DP780 steel[J]. Acta Metallurgica Sinica, 2013,49(2):159-166(in Chinese)
[13]	Diot S, Guines D, Gavrus A, et al. Two-step procedure for identification of metal behavior from dynamic compression tests[J]. International Journal of Impact Engineering, 2007,34(7):1163-1184
[14]	Huh H, Lim J H, Park S H. High speed tensile test of steel sheets for the stress-strain curve at the intermediate strain rate[J]. International Journal of Automotive Technology, 2009,10(2):195-204
[15]	Othman R, Guégan P, Challita G, et al. A modified servo-hydraulic machine for testing at intermediate strain rates[J]. International Journal of Impact Engineering, 2009,36(3):460-467