[1]
|
Braccesi C, Landi L. A general elastic-plastic approach to impact analisys for stress state limit evaluation in ball screw bearings return system[J]. International Journal of Impact Engineering, 2007,34(7):1272-1285
|
[2]
|
沈守范.滚珠丝杠付返珠器正螺旋面型回珠曲线的计算[J].南京理工大学学报(自然科学版),1979,(1):103-114 Shen S F. Computation of positive spiral surface ball-returning curve for ball screw[J]. Journal of Nanjing University of Science and Technology, 1979,(1):103-114(in Chinese)
|
[3]
|
张超鹏.滚珠丝杠新型回珠槽曲线设计与分析[J].机床,1980,(12):5-9,13 Zhang C P. Optimization design and analysis of new ball-returning curve of ball screw[J]. Machine Tool, 1980,(12):5-9,13(in Chinese)
|
[4]
|
杨顺成.内循环滚珠丝杠副反向器的设计优化与分析[J].上海机床,1997,(1):15-17 Yang S C. Optimization design and analysis of return tube for internal recirculation ball screw[J]. Shanghai Machine Tool, 1997,(1):15-17(in Chinese)
|
[5]
|
Hung J P, Wu J S S, Chiu J Y. Impact failure analysis of re-circulating mechanism in ball screw[J]. Engineering Failure Analysis, 2004,11(4):561-573
|
[6]
|
姜洪奎,宋现春,李保民,等.基于滚珠丝杠副流畅性的滚珠返向器型线优化设计[J].振动与冲击,2012,31(2):38-42 Jiang H K, Song X C, Li B M, et al. Optimal design of passage profile of a ball returner based on fluency of a ball screw mechanism[J]. Journal of Vibration and Shock, 2012,31(2):38-42(in Chinese)
|
[7]
|
张佐营,赵越,李志.采用弹性连接降低滚珠丝杠副中滚珠对返向器的冲击[J].机械设计,2010,27(5):28-30 Zhang Z Y, Zhao Y, Li Z. Using elastic joint to minimize the impact caused by the ball to the reverse unit of ball screw pair[J]. Journal of Machine Design, 2010,27(5):28-30(in Chinese)
|
[8]
|
程光仁,施祖康,张超鹏.滚珠螺旋传动设计基础[M].北京:机械工业出版社,1987 Cheng G R, Shi Z K, Zhang C P. Design foundation of ball screw[M]. Beijing:Mechanical Industry Press, 1987(in Chinese)
|
[9]
|
杨峰.况内与特殊工况下滚珠丝杠副的承载特性与返向器研究[D].南京:南京理工大学,2012 Yang F. Design and analysis of return tube for internal recirculation ball screw in special conditions[D]. Nanjing:Nanjing University of Science and Technology, 2012(in Chinese)
|
[10]
|
Zhao G P, Fan Y X, Yang F, et al. The design and kinematic simulation of the return system in ball screw pairs used in special circumstance[J]. Applied Mechanics and Materials, 2013,437:382-387
|
[11]
|
张佐营.高速滚珠丝杠副动力学性能分析及其实验研究[D].济南东山东大学,2008. Zhang Z Y. Analysis and experiment study on dynamic performance of high-speed precision ball screw mechanism[D]. Ji'nan:Shandong University, 2008(in Chinese)
|
[12]
|
姜洪奎,宋现春.滚珠丝杠副滚珠循环系统的动力学研究和仿真[J].振动与冲击,2007,26(3):107-110 Jiang H K, Song X C. Dynamic analysis and simulation of a re-circulation mechanism in ball screw[J]. Journal of Vibration and Shock, 2007,26(3):107-110(in Chinese)
|
[13]
|
Song X C, Tang W C, Jiang H K, et al. Optimized designing for structure of ball screw recycling tunel[J]. Applied Mechanics and Materials, 2011,48-49:802-806
|
[14]
|
Kang X M, Fu W P, Wang D C, et al. Analysis on the influence of the re-circulation mechanism's position on the friction torque fluctuation in ball screw[J]. Advanced Materials Research, 2012,472-475:2663-2669
|