留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

金属板料单点渐进成形自适应螺旋线轨迹生成研究

周建宇 杨明顺 李言 徐青

周建宇, 杨明顺, 李言, 徐青. 金属板料单点渐进成形自适应螺旋线轨迹生成研究[J]. 机械科学与技术, 2017, 36(10): 1562-1569. doi: 10.13433/j.cnki.1003-8728.2017.1013
引用本文: 周建宇, 杨明顺, 李言, 徐青. 金属板料单点渐进成形自适应螺旋线轨迹生成研究[J]. 机械科学与技术, 2017, 36(10): 1562-1569. doi: 10.13433/j.cnki.1003-8728.2017.1013
Zhou Jianyu, Yang Mingshun, Li Yan, Xu Qing. Adaptive Spiral Tool Path Generation in Single Point Incremental Forming of Sheet Metal[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(10): 1562-1569. doi: 10.13433/j.cnki.1003-8728.2017.1013
Citation: Zhou Jianyu, Yang Mingshun, Li Yan, Xu Qing. Adaptive Spiral Tool Path Generation in Single Point Incremental Forming of Sheet Metal[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(10): 1562-1569. doi: 10.13433/j.cnki.1003-8728.2017.1013

金属板料单点渐进成形自适应螺旋线轨迹生成研究

doi: 10.13433/j.cnki.1003-8728.2017.1013
基金项目: 

国家自然科学基金项目(51475366、51475146)与陕西省科技计划项目(2016JM5074)资助

详细信息
    作者简介:

    周建宇(1991-),硕士研究生,研究方向为先进制造与现代加工技术,18091797690@163.com

    通讯作者:

    杨明顺(联系人),副教授,博士,Yangmingshun@xaut.edu.cn

Adaptive Spiral Tool Path Generation in Single Point Incremental Forming of Sheet Metal

  • 摘要: 等高线成形轨迹是现行板料渐进成形的主要加工方式。针对等高线成形方式易产生局部凹陷或破裂等问题,提出了一种基于STereo Lithography(STL)三角面片法向矢量的自适应螺旋线轨迹的生成算法。利用顶点偏置法偏置STL三角面片模型,对偏置后的模型采用自适应分层算法求取分层面与模型的交点,得到与XY平面平行的系列轮廓线,并将各层轮廓线离散成等数点,再对相邻轮廓上点的插值得到自适应螺旋线轨迹。算法实例表明,螺旋线成形轨迹能缩短成形时间,可避免等高线成形中刀位点集中造成的质量缺陷等问题。此外,双成角成形件不同区域表面粗糙度的一致性,说明自适应螺旋线轨迹在变成形角成形件上能避免等高线成形件表面粗糙度的多样性,在统一变成形角成形件表面粗糙上具有广阔的运用前景。
  • [1] 宋修成,陆彬,陈军,等.板料渐进成形件表面质量的影响因素分析[J].机械工程学报,2013,49(8):84-90 Song X C, Lu B, Chen J, et al. Influencing factor analysis on the surface quality of incremental forming parts[J]. Journal of Mechanical Engineering, 2013,49(8):84-90(in Chinese)
    [2] Zhu H, Lin W W, Bai J L. An overview of the sheet metal CNC incremental forming toolpath generation[J]. Advanced Materials Research, 2012,503-504:35-39
    [3] 李敏.金属板材渐进成形CAM技术研究[D].武汉:华中科技大学,2012 Li M. Research on the CAM technique for sheet metal incremental forming[D]. Wuhan:Huazhong University of Science and Technology, 2012(in Chinese)
    [4] 李华溢,朱虎,刘一波,等.数控渐进成形下压点分散的等高线成形轨迹生成[J].机床与液压,2015,43(17):32-34 Li H Y, Zhu H, Liu Y B, et al. Generation of underdraught points dispersed contour forming path for nc incremental forming[J]. Machine Tool & Hydraulics, 2015, 43(17):32-34(in Chinese)
    [5] 毛锋.金属板材数控渐进成形关键技术研究[D].武汉:华中科技大学,2005 Mao F. Research on the key problems of NC incremental sheet metal forming[D]. Wuhan:Huazhong University of Science and Technology, 2005(in Chinese)
    [6] Araghi B T, Manco G L, Bambach M, et al. Investigation into a new hybrid forming process:incremental sheet forming combined with stretch forming[J]. CIRP Annals-Manufacturing Technology, 2009,58(1):225-228
    [7] Attanasio A, Ceretti E, Giardini C. Optimization of tool path in two points incremental forming[J]. Journal of Materials Processing Technology, 2006,177(1-3):409-412
    [8] Hagan E, Jeswiet J. Analysis of surface roughness for parts formed by computer numerical controlled incremental forming[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2014,218(10):1307-1312
    [9] 朱虎,扶建辉,姜在宽.金属板材数控渐进成形螺旋线轨迹生成[J].农业机械学报,2009,40(10):223-226 Zhu H, Fu J H, Jiang Z K. Generation of spiral tool path for sheet metal CNC incremental forming[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009,40(10):223-226(in Chinese)
    [10] Malhotra R, Reddy N V, Cao J. Automatic 3D spiral toolpath generation for single point incremental forming[J]. Journal of Manufacturing Science and Engineering, 2010,132(6):061003
    [11] Lu B, Chen J, Ou H, et al. Feature-based tool path generation approach for incremental sheet forming process[J]. Journal of Materials Processing Technology, 2013,213(7):1221-1233
    [12] 朱虎,杨忠凤,张伟.STL文件的应用与研究进展[J].机床与液压,2009,37(6):186-189 Zhu H, Yang Z F, Zhang W. Progress in study of STL file and its application[J]. Machine Tool & Hydraulics, 2009,37(6):186-189(in Chinese)
    [13] 姚梓萌,李言,杨明顺,等.金属板材单点增量成形过程成形力的研究[J].机械科学与技术,2015,34(7):1044-1047 Yao Z M, Li Y, Yang M S, et al. Study on forming force in single point incremental forming process of sheet metal[J]. Mechanical Science and Technology for Aerospace Engineering, 2015,34(7):1044-1047(in Chinese)
    [14] 朱虎,李建雨.基于顶点偏置的STL模型刀具轨迹生成[J].辽宁工程技术大学学报,2007,26(2):273-275 Zhu H, Li J Y. Tool path generation for STL model based on vertex offset[J]. Journal of Liaoning Technical University, 2007,26(2):273-275(in Chinese)
    [15] 林俊义,黄常标,江开勇.基于STL面片法向矢量的自适应分层算法[J].制造技术与机床,2003,(11):67-68,84 Lin J Y, Huang C B, Wang K Y. Adaptive slicing arithmetic based on STL facet-vector model[J]. Manufacturing Technology & Machine Tool, 2003,(11):67-68,84(in Chinese)
    [16] 肖苏华.三维CAD实体文件转化STL文件格式精度研究[J].模具工业,2014,40(9):12-14 Xiao S H. Study on conversion precision of 3D CAD entity files to STL file format[J]. Die & Mould Industry, 2014,40(9):12-14(in Chinese)
  • 加载中
计量
  • 文章访问数:  269
  • HTML全文浏览量:  31
  • PDF下载量:  7
  • 被引次数: 0
出版历程
  • 收稿日期:  2016-07-09
  • 刊出日期:  2017-10-05

目录

    /

    返回文章
    返回