留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

MoS2基固体润滑剂微织构自润滑刀具切削性能的研究

周后明 罗文懿 龙远强 张高峰 周友行

周后明, 罗文懿, 龙远强, 张高峰, 周友行. MoS2基固体润滑剂微织构自润滑刀具切削性能的研究[J]. 机械科学与技术, 2017, 36(8): 1307-1312. doi: 10.13433/j.cnki.1003-8728.2017.0827
引用本文: 周后明, 罗文懿, 龙远强, 张高峰, 周友行. MoS2基固体润滑剂微织构自润滑刀具切削性能的研究[J]. 机械科学与技术, 2017, 36(8): 1307-1312. doi: 10.13433/j.cnki.1003-8728.2017.0827
Zhou Houming, Luo Wenyi, Long Yuanqiang, Zhang Gaofeng, Zhou Youhang. Study on Cutting Performance of Micro-texturing Self-lubricated Cutting Tools with Molybdenum Disulfide-based Solid Lubricants[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(8): 1307-1312. doi: 10.13433/j.cnki.1003-8728.2017.0827
Citation: Zhou Houming, Luo Wenyi, Long Yuanqiang, Zhang Gaofeng, Zhou Youhang. Study on Cutting Performance of Micro-texturing Self-lubricated Cutting Tools with Molybdenum Disulfide-based Solid Lubricants[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(8): 1307-1312. doi: 10.13433/j.cnki.1003-8728.2017.0827

MoS2基固体润滑剂微织构自润滑刀具切削性能的研究

doi: 10.13433/j.cnki.1003-8728.2017.0827
基金项目: 

国家自然科学基金项目(51375418,51375419,51275436)资助

详细信息
    作者简介:

    周后明(1970-),教授,博士,研究方向为高速加工技术及其工具、刀具与刀具材料,305452837@qq.com

Study on Cutting Performance of Micro-texturing Self-lubricated Cutting Tools with Molybdenum Disulfide-based Solid Lubricants

  • 摘要: 采用激光加工方法在硬质合金刀具的前刀面加工不同形状的微织构,并填充不同的固体润滑剂,对制备的微织构自润滑刀具以及传统刀具进行干切削304奥氏体不锈钢的对比试验。试验结果表明,与传统硬质合金刀具相比,微织构自润滑刀具能显著地降低切削力,减小前刀面摩擦系数,降低切削温度,减少刀具前刀面的磨损。选用MoS2/Sb2O3复合固体润滑剂能更好地提高微织构刀具的切削性能,减少切屑的粘结。
  • [1] 艾兴.高速切削加工技术:先进制造技术丛书[M].北京:国防工业出版社,2003 Ai X. High speed machining technology[M]. Beijing:National Defense Industry Press, 2003(in Chinese)
    [2] 王西彬.绿色切削加工技术的研究[J].机械工程学报,2000,36(8):6-9,14 Wang X B. Green machining technology in metal cutting[J]. Chinese Journal of Mechanical Engineering, 2000,36(8):6-9,14(in Chinese)
    [3] 邓建新,葛培琪,艾兴.切削加工润滑技术研究现状及展望[J].摩擦学学报,2003,23(6):546-550 Deng J X, Ge P Q, Ai X. Development and perspective of lubricating techniques in metal cutting[J]. Tribology, 2003,23(6):546-550(in Chinese)
    [4] 宋文龙,邓建新,王志军.微池润滑刀具干切削过程中的减摩机理[J].摩擦学学报,2009,29(2):103-108 Song W L, Deng J X, Wang Z J. Machining performance of micro-pool tools[J]. Tribology, 2009,29(2):103-108(in Chinese)
    [5] Xing Y Q, Deng J X, Zhao J, et al. Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel[J]. International Journal of Refractory Metals and Hard Materials, 2014,43:46-58
    [6] Xing Y Q, Deng J X, Feng X T, et al. Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction[J]. Materials & Design, 2013,52:234-245
    [7] Sugihara T, Enomoto T. Development of a cutting tool with a nano/micro-textured surface-improvement of anti-adhesive effect by considering the texture patterns[J]. Precision Engineering, 2009,33(4):425-429
    [8] 王月梅,周惠娣,陈建敏,等.含二硫化钼、石墨和三氧化二锑的水性环氧树脂黏结固体润滑涂层的摩擦磨损性能[J].摩擦学学报,2010,30(6):577-583 Wang Y M, Zhou H D, Chen J M, et al. Preparation and friction and wear behavior of waterborne epoxy resin-based bonded solid lubricant coatings[J]. Tribology, 2010,30(6):577-583(in Chinese)
    [9] Settineri L, Faga M G, Lerga B. Properties and performances of innovative coated tools for turning Inconel[J]. International Journal of Machine Tools and Manufacture, 2008,48(7-8):815-823
    [10] Zabinski J S, Donley M S, McDevitt N T. Mechanistic study of the synergism between Sb2O3and MoS2 lubricant systems using Raman spectroscopy[J]. Wear, 1993,165(1):103-108
    [11] 邓建新.自润滑刀具及其切削加工[M].北京:科学出版社,2010 Deng J X. Self-lubricating tool and its cutting performances[M]. Beijing:Science Press, 2010(in Chinese)
    [12] Enomoto T, Sugihara T. Improving anti-adhesive properties of cutting tool surfaces by nano-/micro-textures[J]. CIRP Annals-Manufacturing Technology, 2010,59(1):597-600
    [13] 刘强,张弘弢,董海,等.涂层硬质合金刀具切削奥氏体不锈钢切削力的试验研究[J].工具技术,2008,42(4):22-25 Liu Q, Zhang H T, Dong H, et al. Investigation of cutting forces when turning austenitic stainless steels using coated cemented carbide cutting tool[J]. Tool Engineering, 2008,42(4):22-25(in Chinese)
  • 加载中
计量
  • 文章访问数:  187
  • HTML全文浏览量:  29
  • PDF下载量:  5
  • 被引次数: 0
出版历程
  • 收稿日期:  2016-04-28
  • 刊出日期:  2017-08-05

目录

    /

    返回文章
    返回