[1]
|
Andersen M R, Jensen T, Lisouski P, et al. Kinect depth sensor evaluation for computer vision applications[J]. Technical Report Electronics and Computer Engineering, 2012,1(6):37
|
[2]
|
Li J B, Rao X Q, Wang F J, et al. Automatic detection of common surface defects on oranges using combined lighting transform and image ratio methods[J]. Postharvest biology and Technology, 2013,82:59-69
|
[3]
|
Seulin R, Merienne F, Gorria P. Dynamic lighting system for specular surface inspection[C]//Proceedings of SPIE 4301, Machine Vision Applications in Industrial Inspection IX. San Jose, CA:SPIE, 2001:199-206
|
[4]
|
Ng T W. Optical inspection of ball bearing defects[J]. Measurement Science and Technology, 2007,18(9):N73-N76
|
[5]
|
刘元坤,苏显渝,吴庆阳.基于条纹反射的类镜面三维面形测量方法[J].光学学报,2006,26(11):1636-1640 Liu Y K, Su X Y, Wu Q Y. Three-dimensional shape measurement for specular surface based on fringe reflection[J]. Acta Optica Sinica, 2006,26(11):1636-1640(in Chinese)
|
[6]
|
Li L, Wang Z, Pei F Y, et al. Improved illumination for vision-based defect inspection of highly reflective metal surface[J]. Chinese Optics Letters, 2013,11(2):021102
|
[7]
|
Wang Z, Xing Q, Fu L H, et al. Realtime vision-based surface defect inspection of steel balls[J]. Transactions of Tianjin University, 2015,21(1):76-82
|
[8]
|
栗琳.基于视觉的高反射球面缺陷快速检测关键技术研究[D].天津:天津大学,2013 Li L. Study on the key technology of surface defects inspection on highly reflective sphere based on vision[D]. Tianjin:Tianjin University, 2013(in Chinese)
|
[9]
|
姜宏志,赵慧洁,李旭东,等.用于强反射表面形貌测量的投影栅相位法[J].光学精密工程,2010,18(9):2002-2008 Jiang H Z, Zhao H J, Li X D, et al. Projected fringe profilometry for profile measurement of high reflective surface[J]. Optics and Precision Engineering, 2010,18(9):2002-2008(in Chinese)
|
[10]
|
胡瑢华,余明,刘国平.带钢表面划痕缺陷视觉检测照明系统分析[J].光电工程,2010,37(12):55-58 Hu R H, Yu M, Liu G P. Lighting system analysis of visual inspection of strip-surface scratch defects[J]. Opto-Electronic Engineering, 2010,37(12):55-58(in Chinese)
|
[11]
|
王亚洲,万秋华,杜颖财,等.光电编码器单莫尔条纹测速方法[J].中国光学,2015,8(6):1044-1050 Wang Y Z, Wan Q H, Du Y C, et al. Velocity measurement method based on single moiré fringe[J]. Chinese Optics, 2015,8(6):1044-1050(in Chinese)
|
[12]
|
赵彦玲,赵志强,孙蒙蒙,等.钢球展开过程球面点运动轨迹分析及实验验证[J].哈尔滨理工大学学报,2016,21(1):13-17 Zhao Y L, Zhao Z Q, Sun M M, et al. Analysis of spherical point trajectory in the process of steel ball unfolding[J]. Journal of Harbin University of Science and Technology, 2016,21(1):13-17(in Chinese)
|
[13]
|
Moreno I, Avendaño-Alejo M, Tzonchev R I. Designing light-emitting diode arrays for uniform near-field irradiance[J]. Applied Optics, 2006,45(10):2265-2272
|
[14]
|
栗琳,王仲,裴芳莹,等.双图像传感器的球表面展开方法[J].仪器仪表学报,2012,33(7):1641-1646 Li L, Wang Z, Pei F Y, et al. Sphere surface unfolding method with two image sensors[J]. Chinese Journal of Scientific Instrument, 2012,33(7):1641-1646(in Chinese)
|
[15]
|
中华人民共和国国家发展和改革委员会.JB/T 10861-2008滚动轴承钢球表面缺陷图册及评定方法[S].北京:机械工业出版社,2008 National Development and Reform Commission. JB/T 10861-2008 Rolling bearings-Atlas and the assessment methods for surface imperfections of steel balls[S]. Beijing:China Machine Press, 2008(in Chinese)
|