留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

可控超声探伤仪自动检定系统的研究与实现

孙景峰 刘慧英 舒蓉 魏开利

孙景峰, 刘慧英, 舒蓉, 魏开利. 可控超声探伤仪自动检定系统的研究与实现[J]. 机械科学与技术, 2017, 36(7): 1085-1091. doi: 10.13433/j.cnki.1003-8728.2017.0717
引用本文: 孙景峰, 刘慧英, 舒蓉, 魏开利. 可控超声探伤仪自动检定系统的研究与实现[J]. 机械科学与技术, 2017, 36(7): 1085-1091. doi: 10.13433/j.cnki.1003-8728.2017.0717
Sun Jingfeng, Liu Huiying, Shu Rong, Wei Kaili. Research and Realization of Automatic Verification System for Controllable Ultrasonic Fault Detector[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(7): 1085-1091. doi: 10.13433/j.cnki.1003-8728.2017.0717
Citation: Sun Jingfeng, Liu Huiying, Shu Rong, Wei Kaili. Research and Realization of Automatic Verification System for Controllable Ultrasonic Fault Detector[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(7): 1085-1091. doi: 10.13433/j.cnki.1003-8728.2017.0717

可控超声探伤仪自动检定系统的研究与实现

doi: 10.13433/j.cnki.1003-8728.2017.0717
详细信息
    作者简介:

    孙景峰(1981-),博士生,研究方向为图像处理、机器视觉,sunjf2000@163.com

    通讯作者:

    刘慧英(联系人),博士,教授,博士生导师,lhy2005@nwpu.edu.cn

Research and Realization of Automatic Verification System for Controllable Ultrasonic Fault Detector

  • 摘要: 在分析现行人工手动检定方法的基础上,针对具有远程控制接口的超声探伤仪的自动检定方法展开研究,设计并开发了自动检定系统。利用可扩展标记语言(XML),建立了设备远程控制指令集与数据解析方法库,解决了被检仪器接口与协议多样化的可扩展设计问题;采用信号发生器与程控衰减器级联的方式,实现了计量用标准衰减器的可控设计,有效突破了计量用高精度衰减器可控的瓶颈,解决了大衰减范围、小衰减步进和高衰减精度等问题;对被检超声探伤仪扫描范围参数的检定,提出用计算的方法代替传统的计数方式,实现了检定过程数字化。
  • [1] Aubele M. Nondestructive testing in aerospace:NDT is now compulsory for many aerospace companies, as it plays a safety critical role in the production process[J]. Quality, 2015,54(7):S6
    [2] 杜南胜,谢常欢,谷安祥.特种设备无损检测仪器设备检定与校准的思考[J].中国认证认可,2008,(3):30-35 Du N S, Xie C H, Gu A X. Consideration of special equipment nondestructive testing equipment test and calibration[J]. China Certification and Accreditation, 2008,(3):30-35(in Chinese)
    [3] 国家质量监督检验检疫总局.JJG 746-2004超声探伤仪检定规程[S].北京:中国计量出版社,2005 General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. JJG 746-2004 Verification regulation for ultrasonic flaw detectors[S]. Beijing:China Metrology Publishing House, 2005(in Chinese)
    [4] BS. EN 12668-1 Non-destructive testing-characterization and verification of ultrasonic examination equipment-part 1:instruments[S]. 2010
    [5] ASTM. E317-11 Standard practice for evaluating performance characteristics of ultrasonic pulse-echo testing instruments and systems without the use of electronic measurement instruments[S]. 2012
    [6] 贺涛,唐薇薇,刘夏茹.超声探伤仪检定装置数字化研究[J].中国测试,2014,40(4):111-114 He T, Tang W W, Liu X R. Digital research on equipment of ultrasonic inspection detectors[J]. China Measurement & Test, 2014,40(4):111-114(in Chinese)
    [7] Xiao D G, Yang B, Pan Q X, et al. Measurement of characteristic parameters of ultrasonic flaw detectors[C]//Proceedings of 2012 International Conference on Mechatronics and Automation (ICMA), 5-8 August, 2012, Chengdu. Chengdu:IEEE, 2012:641-646
    [8] Svilainis L, Chaziachmetovas A, Tervydis P, et al. Automated parameters measurement of the ultrasonic excitation equipment[C]//Proceedings of the 2015 IEEE 8th International Conference on Intelligent Data Acquisition and Advanced Computing Systems:Technology and Applications (IDAACS), 24-26 September, 2015, Warsaw. Warsaw:IEEE, 2015:12-17
    [9] Huang Y S, Wu J N, Chen P Y, et al. Remote interface apparatus, control system, and the method thereof:US, 8539054[P]. 2013-09-17
    [10] Svilainis L, Chaziachmetovas A, Dumbrava V. Half bridge topology 500 V pulser for ultrasonic transducer excitation[J]. Ultrasonics, 2015,59:79-85
    [11] 赵建勋,田锡天,贾晓亮,等.制造软件互操作性模型[J].机械科学与技术,2008,27(6):715-720 Zhao J X, Tian X T, Jia X L, et al. Manufacturing software interoperability model[J]. Mechanical Science and Technology for Aerospace Engineering, 2008,27(6):715-720(in Chinese)
    [12] 张晓晖,刘丁,李攀.基于网络的机器人远程控制系统实现与研究[J].机械科学与技术,2007,26(6):808-811,816 Zhang X H, Liu D, Li P. Realization of remote robot control system through network[J]. Mechanical Science and Technology for Aerospace Engineering, 2007,26(6):808-811,816(in Chinese)
    [13] 郭文行,陈柏金,胡彦兵.快锻液压机远程监测与故障诊断系统构建[J].机械科学与技术,2015,34(5):748-751 Guo W X, Chen B J, Hu Y B. Remote monitoring and construction of fault diagnosis system for fast forging hydraulic press[J]. Mechanical Science and Technology for Aerospace Engineering, 2015,34(5):748-751(in Chinese)
    [14] Baki A K M. Continuous monitoring of smart grid devices through multi protocol label switching[J]. IEEE Transactions on Smart Grid, 2014,5(3):1210-1215
    [15] Goswami S, Kundu C. XML based advanced distributed database:implemented on library system[J]. International Journal of Information Management, 2013,33(1):28-31
    [16] He P Y, Yang J. A self monitoring remote measurement and control platform design and implementation[C]//Proceedings of the 2013 Third International Conference on Instrumentation, Measurement, Computer, Communication and Control (IMCCC), 21-23 September, 2013, Shenyang. Shenyang:IEEE, 2013:1635-1640
    [17] 沈玉娣.现代无损检测技术[M].西安:西安交通大学出版社,2012:7,34-37 Shen Y D. Modern NDT[M]. Xi'an:Xi'an Jiaotong University Press, 2012:7,34-37(in Chinese)
  • 加载中
计量
  • 文章访问数:  140
  • HTML全文浏览量:  23
  • PDF下载量:  4
  • 被引次数: 0
出版历程
  • 收稿日期:  2016-03-24
  • 刊出日期:  2017-07-05

目录

    /

    返回文章
    返回