[1]
|
Hauer T A. Axisymmetric vectoring exhaust nozzle: US 4994660[P]. 1991-02-19
|
[2]
|
王玉新.喷气发动机轴对称推力矢量喷管[M].北京:国防工业出版社,2006:1-19 Wang Y X. Axian-symmetric vectoring exhaust nozzle for jet-thrust-aircraft[M]. Beijing: National Defence Industry Press, 2006:1-19 (in Chinese)
|
[3]
|
丁凯锋,樊思齐.矢量喷管与发动机的共同工作研究[J].航空动力学报,2000,15(1):93-95 Ding K F, Fan S Q. A study on Co-Operating between thrust vectoring nozzle and aeroengine[J]. Journal of Aerospace Power, 2000,15(1):93-95 (in Chinese)
|
[4]
|
Benjamin G-O. Future jet technologies, Part C[J]. International Journal of Turbo and Jet-Engines, 2013,30(2):133-143
|
[5]
|
王玉新,王仪明,李雨桐.轴对称推力矢量喷管载荷变形的控制补偿[J].航空动力学报,2007,22(10):1685-1689 Wang Y X, Wang Y M, Li Y T. Load deformation compensation of the axisymmetric vectoring exhaust nozzle[J]. Journal of Aerospace Power, 2007,22(10):1685-1689 (in Chinese)
|
[6]
|
Matesanz A, Velazquez A, Rodriguez M. Mach disk simulation in jets from convergent-divergent axisymmetric and thrust-vectoring nozzles[C]//Fluid Dynamics Conference. Colorado Springs, CO: AIAA, 1994
|
[7]
|
高阳,白广忱,于霖冲.矢量喷管柔性机构运动及可靠性仿真[J].系统仿真学报,2006,18(S2):175-178 Gao Y, Bai G C, Yu L C. Simulation and reliability analysis of axisymmetric vectoring exhaust nozzle flexible mechanism[J]. Journal System Simulation, 2006,18(S2):175-178 (in Chinese)
|
[8]
|
蒲雪萍.轴对称矢量喷管控制系统半物理仿真试验[J].燃气涡轮试验与研究,2003,16(2):18-21 Pu X P. A Semi-physical simulation of axisymmetric vectoring nozzle[J]. Gas Turbine Experiment and Research, 2003,16(2):18-21 (in Chinese)
|
[9]
|
唐宇峰,沈锡钢,李泳凡,等.喷管喉道面积变化对大涵道比分排涡扇发动机性能的影响[J].航空发动机,2011,37(1):12-15,19 Tang Y F, Shen X G, Li Y F, et al. Effect of nozzle throat area variation on performance of high bypass ratio turbofan engine with separate flow[J]. Aeroengine, 2011,37(1):12-15,19 (in Chinese)
|
[10]
|
王莉,袁茹,王三民,等.温固耦合下轴对称推力矢量喷管驱动机构的运动精度分析[J].机械科学与技术,2008,27(6):752-756 Wang L, Yuan R, Wang S M, et al. Kinematic precision analysis of axial-symmetric vectoring exhaust nozzle with coupling of temperature and structure[J]. Mechanical Science and Technology for Aerospace Engineering, 2008,27(6):752-756 (in Chinese)
|
[11]
|
杨军刚,张卫红.轴对称推力矢量喷管调节环结构优化设计研究[J].机械制造,2012,50(4):16-19 Yang J G, Zhang W H. The research of optimization design for Axisymmetric thrust vectoring nozzle adjustment ring structure[J]. Machinery, 2012,50(4):16-19 (in Chinese)
|
[12]
|
张春林.高等机构学[M].北京:北京理工大学出版社,2005:60-72 Zhang C L. Advanced kinematics and dynamics of mechanisms[M]. Beijing: Beijing Institute of Technology Press, 2005:60-72 (in Chinese)
|
[13]
|
额日其太,李喜喜,王强.轴对称喷管喉道面积射流控制数值模拟研究[J].推进技术,2010,31(3):361-365 Eriqitai, Li X X, Wang Q. Computational investigation on axisymmetric nozzles with fluidic injection for throat area control[J]. Journal of Propulsion Technology, 2010,31(3):361-365 (in Chinese)
|
[14]
|
Williams R G, Vittal B R. Fluidic thrust vectoring and throat control exhaust nozzle[C]//38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Joint Propulsion Conferences. Indianapolis, Indiana: AIAA, 2002
|
[15]
|
Saito T, Fujimoto T. Numerical studies of shock vector control for deflecting nozzle exhaust flows[M]//Hannemann K, Seiler F. Shock Waves. Berlin Heidelberg: Springer, 2009:985-990
|
[16]
|
Deere K A, Berrier B L, Flamm J D, et al. Computational study of fluidic thrust vectoring using separation control ina nozzle[C]//21st AIAA Applied Aerodynamics Conference. Orlando, Florida: AIAA, 2003
|