[1]
|
Kurada S, Bradley C. A review of machine vision sensors for tool condition monitoring[J]. Computer in Industry, 1997,34(1):55-72
|
[2]
|
Li H Z, Zeng H, Chen X Q. An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts[J]. Journal of Materials Processing Technology, 2006,180(1-3):296-304
|
[3]
|
Alonso F J, Salgado D R. Analysis of the structure of vibration signals for tool wear detection[J]. Mechanical Systems and Signal Processing, 2008,22(3):735-748
|
[4]
|
Lee J H, Kim D E, Lee S J. Statistical analysis of cutting force ratios for flank-wear monitoring[J]. Journal of Materials Processing Technology, 1998,74(1-3):104-114
|
[5]
|
Ravindra H V, Srinivasa Y G, Krishnamurthy R. Acoustic emission for tool condition monitoring in metal cutting[J]. Wear, 1997,212(1):78-84
|
[6]
|
Salgado D R, Alonso F J. An approach based on current and sound signals for in-process tool wear monitoring[J]. International Journal of Machine Tools and Manufacture, 2007,47(14):2140-2152
|
[7]
|
叶林,刘鹏.基于经验模态分解和支持向量机的短期风电功率组合预测模型[J].中国电机工程学报,2011,31(31):102-108 Ye L, Liu P. Combined model based on EMD-SVM for short-term wind power prediction[J]. Proceedings of the CSEE, 2011,31(31):102-108 (in Chinese)
|
[8]
|
Shi D F, Gindy N N. Tool wear predictive model based on least squares support vector machines[J]. Mechanical Systems and Signal Processing, 2007,21(4):1799-1814
|
[9]
|
Lin K P, Chen M S. On the design and analysis of the privacy-preserving SVM classifier[J]. IEEE Transactions on Knowledge and Data Engineering, 2011,23(11):1704-1717
|
[10]
|
Zhou J G, Bai T, Tian J M, et al. The study of SVM optimized by culture particle swarm optimization on predicting financial distress[C]//Proceedings of the 2008 IEEE International Conference on Automation and Logistics. New York: IEEE, 2008:1054-1059
|
[11]
|
Elangovan M, Sugumaran V, Ramachandran K I, et al. Effect of SVM kernel functions on classification of vibration signals of a single point cutting tool[J]. Expert Systems with Applications, 2011,38(12):15202-15207
|
[12]
|
Chen X, Limchimchol T. Monitoring grinding wheel redress-life using support vector machines[J]. International Journal of Automation and Computing, 2006,3(1):56-62
|
[13]
|
Huang J, Hu X G, Yang F. Support vector machine with genetic algorithm for machinery fault diagnosis of high voltage circuit breaker[J]. Measurement, 2011,44(6):1018-1027
|
[14]
|
关山.在线金属切削刀具磨损状态监测研究的回顾与展望IIΠ信号特征的提取[J].机床与液压,2010,38(17):121-125 Guan S. The review and perspective of the research of on-line and indirect metal cutting tool condition monitoring ΠI: feature extraction of monitoring signals[J]. Machine Tool & Hydraulics, 2010,38(17):121-125 (in Chinese)
|
[15]
|
Abellan-Nebot J V, Subirón F R. A review of machining monitoring systems based on artificial intelligence process models[J]. The International Journal of Advanced Manufacturing Technology, 2010,47(1-4):237-257
|
[16]
|
姚继涛,解耀魁.既有结构可靠性评定中变异系数统计推断[J].建筑结构学报,2010,31(8):101-105 Yao J T, Xie Y K. Statistical inference for coefficient of variation in reliability assessment of existing structure[J]. Journal of Building Structures, 2010,31(8):101-105 (in Chinese)
|
[17]
|
钱磊.基于支持向量机的变参数铣削刀具磨损状态监测研究[D].天津:天津大学,2014 Qian L. Research on tool wear state monitoring based on support vector machine in milling under variable parameters[D]. Tianjin: Tianjin University, 2014 (in Chinese)
|
[18]
|
赵湛,李耀明,陈义,等.水稻籽粒碰撞力学特性研究[J].农业机械学报,2013,44(6):88-92 Zhao Z, Li Y M, Chen Y, et al. Impact mechanical characteristics analysis of rice grain[J]. Transactions of the Chinese Society for Agricultural Machinery, 2013,44(6):88-92 (in Chinese)
|
[19]
|
Kuljanic E, Sortino M. TWEM, a method based on cutting forces-monitoring tool wear in face milling[J]. International Journal of Machine Tools and Manufacture, 2005,45(1):29-34
|