[1]
|
王伟,刘妍,钱家祥.空气动力用螺杆压缩机应用现状分析[J].压缩机技术,2013,(3):66-68 Wang W, Liu Y, Qian J X. Analysis of application and current situation of aerodynamic screw compressor[J]. Compressor Technology, 2013,(3):66-68(in Chinese)
|
[2]
|
邢子文,彭学院,束鹏程.螺杆压缩机新型线的研究与设计[J].压缩机技术,1997,(1):9-12 Xing Z W, Peng X Y, Shu P C. Research and design of a new profiles of screw compressor[J]. Compressor Technology, 1997,(1):9-12(in Chinese)
|
[3]
|
Zhang L, Hamilton J F. Development of sealing line calculation in twin screw compressor[C]//Proceedings of the Third International Symposium on Transport Phenomena and Dynamics of Rotating Machinery. Hawaii, 1990:623-638
|
[4]
|
Stosic N, Smith I K, Kovacevic A. Optimisation of screw compressors[J]. Applied Thermal Engineering, 2003,23(10):1177-1195
|
[5]
|
徐健,余宾宴,余小玲,等.螺杆压缩机转子型线设计方法[J].压缩机技术,2012,(2):1-6,14 Xu J, Yu B Y, Yu X L, et al. Study on rotor profile design of screw compressors[J]. Compressor Technology, 2012,(2):1-6,14(in Chinese)
|
[6]
|
Wu Y R, Fong Z H. Optimization design of an explicitly defined rack for the generation of rotors for twin-screw compressors[J]. Mechanism and Machine Theory, 2009,44(1):66-82
|
[7]
|
He X M, Liu H Y, Lu Y, et al. Positive and reverse design of screw rotor profiles with freeform curve[J]. Applied Mechanics and Materials, 2012,184-185:372-375
|
[8]
|
何雪明,戴进,刘洪园.基于自由曲线的螺杆转子型线的正反向设计[J].中国机械工程,2012,23(22):2752-2757 He X M, Dai J, Liu H Y. Positive and reverse design of screw rotor profiles based on freeform curve[J]. China Mechanical Engineering, 2012,23(22):2752-2757(in Chinese)
|
[9]
|
Zaytsev D, Ferreira C A I. Profile generation method for twin screw compressor rotors based on the meshing line[J]. International Journal of Refrigeration, 2005,28(5):744-755
|
[10]
|
Wu Y R, Fong Z H. Improved rotor profiling based on the arbitrary sealing line for twin-screw compressors[J]. Mechanism and Machine Theory, 2008,43(6):695-711
|
[11]
|
吴华根,彭学院,邢子文,等.部分负荷工况下螺杆制冷压缩机特性试验研究[J].机械工程学报,2004,40(7):195-198 Wu H G, Peng X Y, Xing Z W, et al. Experimental study on the performance characteristics of screw refrigeration compressor under part load conditions[J]. Chinese Journal of Mechanical Engineering, 2004,40(7):195-198(in Chinese)
|
[12]
|
熊伟,冯全科.基于三维的双螺杆压缩机转子干涉研究[J].机械工程学报,2005,41(6):55-59 Xiong W, Feng Q K. Study of rotor interference in screw compressors based on three dimensions[J]. Chinese Journal of Mechanical Engineering, 2005,41(6):55-59(in Chinese)
|
[13]
|
He X M, Han M, Deng Y, et al, Hua Chengliang. Rotor profile generation method for twin screw compressors based on bi-direction[J]. Applied Mechanics and Materials, 2012,229-231:465-469
|
[14]
|
刘斌,黄常标,林俊义,等.流形网格曲面上测地B样条插值[J].机械工程学报,2011,47(19):136-142 Liu B, Huang C B, Lin J Y, et al. Interpolation of geodesic B-spline curves on manifold triangulation[J]. Journal of Mechanical Engineering, 2011,47(19):136-142(in Chinese)
|
[15]
|
Rane S, Kovacevic A, Stosic N, et al. Grid deformation strategies for CFD analysis of screw compressors[J]. International Journal of Refrigeration, 2013,36(7):1883-1893
|
[16]
|
吴慧媛,何雪明,戴进.基于CFD的双螺杆压缩机的三维动态仿真分析研究[J].中国机械工程,2013,24(24):3366-3371 Wu H Y, He X M, Dai J. Research on 3D dynamic simulation analysis of screw compressor by CFD[J]. China Mechanical Engineering, 2013,24(24):3366-3371(in Chinese)
|