[1]
|
Liu Y H, Hao Z Y, Bi F R, et al. Engine noise source identification with different methods[J]. Transactions of Tianjin University, 2002,8(3):174-177
|
[2]
|
邓江华,顾灿松,刘献栋,等.基于声阵列技术的汽车噪声源识别及贡献量分析[J].振动工程学报,2010,23(6):630-635 Deng J H, Gu C S, Liu X D, et al. Sound source identification and contribution analysis based on acoustic array technology[J]. Journal of Vibration Engineering, 2010,23(6):630-635(in Chinese)
|
[3]
|
刘海,张俊红,毕凤荣,等. 柴油机辐射噪声预测与低噪声改进设计[J].内燃机学报,2011,29(3):265-269 Liu H, Zhang J H, Bi F R, et al. Radiation noise prediction and low-noise modification of diesel engine[J]. Transactions of CSICE, 2011,29(3):265-269(in Chinese)
|
[4]
|
孟浩东,李舜酩,吕志翔,等.柴油机前端齿轮室总成异响源识别分析与改进[J].中国机械工程,2013,24(17):2295-2300 Meng H D, Li S M, Lü Z X, et al. Identification analysis and improvement on abnormal noise source for front gear chamber assembly of diesel engine[J]. China Mechanical Engineering, 2013,24(17):2295-2300(in Chinese)
|
[5]
|
Nivesrangsan P, Steel J A, Reuben R L. Source location of acoustic emission in diesel engines[J]. Mechanical Systems and Signal Processing, 2007,21(2):1103-1114
|
[6]
|
Pruvost L, Leclere Q, Parizet E. Diesel engine combustion and mechanical noise separation using an improved spectrofilter[J]. Mechanical Systems and Signal Processing, 2009,23(7):2072-2087
|
[7]
|
Shu G Q, Liang X Y. Identification of complex diesel engine noise sources based on coherent power spectrum analysis[J]. Mechanical Systems and Signal Processing, 2007,21(1):405-416
|
[8]
|
陈步达,王诗恩,周孔亢.车辆主要噪声源识别方法的研究[J].机械工程学报,1997,33(6):77-80 Chen B D, Wang S E, Zhou K K. Study of identification methods of main noise sources of a vehicle[J]. Chinese Journal of Mechanical Engineering, 1997,33(6):77-80(in Chinese)
|
[9]
|
梁兴雨,舒歌群.柴油机噪声源的识别及降噪研究[J].兵工学报,2006,27(4):587-591 Liang X Y, Shu G Q. Noise source identification and noise reduction for diesel engine[J]. Acta Armamentarii, 2006,27(4):587-591(in Chinese)
|
[10]
|
岳东鹏,郝志勇,刘月辉,等.柴油机表面辐射噪声源识别的研究[J].汽车工程,2004,26(5):613-615,618 Yue D P, Hao Z Y, Liu Y H, et al. A study on surface noise sources identification for diesel engine[J]. Automotive Engineering, 2004,26(5):613-615,618(in Chinese)
|
[11]
|
舒歌群,马维忍,梁兴雨,等.柴油机薄壁件表面辐射噪声的研究[J].内燃机工程,2009,30(2):25-28,33 Shu G Q, Ma W R, Liang X Y, et al. Radiation noise of external thin-wall components in diesel engine[J]. Chinese Internal Combustion Engine Engineering, 2009,30(2):25-28,33(in Chinese)
|
[12]
|
蔡相儒,魏长生,沈秀奇,等.发动机子声源隔声识别法的研究及应用[J].内燃机工程,2010,31(4):105-108 Cai X R, Wei C S, Shen X Q, et al. Research and application of engine sub-sound source noise-isolation identification[J]. Chinese Internal Combustion Engine Engineering, 2010,31(4):105-108(in Chinese)
|
[13]
|
何天明,蒋维铭,乔秀娟,等.6105QA柴油机气门室盖辐射噪声计算及控制[J].武汉工学院学报,1995,17(4):12-18 He T M, Jiang W M, Qiao X J, et al. Radiation noise of 6105QA diesel valve chamber cover calculation and its control[J]. Journal of Wuhan Institute of Technology, 1995,17(4):12-18(in Chinese)
|
[14]
|
张志,孟少平,周臻,等.振动台试验加速度积分方法[J].振动、测试与诊断,2013,33(4):627-633 Zhang Z, Meng S P, Zhou Z, et al. Numerical integration method of acceleration recodes for shaking table test[J]. Journal of Vibration, Measurement & Diagnosis, 2013,33(4):627-633(in Chinese)
|
[15]
|
顾名坤,吕振华.基于振动加速度测量的振动速度和位移信号识别方法探讨[J].机械科学与技术,2011,30(4):522-526 Gu M K, Lü Z H. Identification of a mechanism's vibration velocity and displacement based on the acceleration measurement[J]. Mechanical Science and Technology for Aerospace Engineering, 2011,30(4):522-526(in Chinese)
|