[1]
|
苏宇锋,袁文信,刘德平,等.高速车铣复合加工中心床鞍的热态特性分析[J].组合机床与自动化加工技术,2011,(4):31-32,36 Su Y F, Yuan W X, Liu D P, et al. Thermal characteristics of the saddle of high speed turn-milling combined CNC machine center[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2011,(4):31-32,36(in Chinese)
|
[2]
|
李杰,刘德平,苏宇锋,等.高速铣削床鞍温度场建模与热变形分析[J].机械设计与制造,2011,(7):211-212 Li J, Liu D P, Su Y F, et al. Temperature field modeling and thermal deformation analyzing for saddle in high-speed milling[J]. Machinery Design & Manufacture, 2011,(7):211-212(in Chinese)
|
[3]
|
Ohta H, Hayashi E. Vibration of linear guide way type recirculating linear ball bearings[J]. Journal of Sound and Vibration, 2000,235(5):847-861
|
[4]
|
Berczynski S, Gutowski P. Identi cation of the dynamic models of machine tool supporting systems. Part I:an algorithm of the method[J]. Journal of Vibration and Control, 2006,12(3):257-277
|
[5]
|
Hungsun S, Choi H J, Park H W. Design and dynamic analysis of an arch-type desktop reconfigurable machine[J]. International Journal of Machine Tools and Manufacture, 2010,50(6):575-584
|
[6]
|
Altintas Y, Stepan G, Merdol D, et al. Chatter stability of milling in frequency and discrete time domain[J]. CIRP Journal of Manufacturing Science and Technology, 2008,1(1):35-44
|
[7]
|
马雅丽,赵二鑫,赵宏安,等.拓扑优化的数控车削中心床鞍轻量化设计[J].机械设计与研究,2011,27(3):103-107 Ma Y L, Zhao E X, Zhao H A, et al. The light-weight design of turning center saddle bed based on topology optimization[J]. Machine Design and Research, 2011,27(3):103-107(in Chinese)
|
[8]
|
张永存,崔雷,周玲丰,等.基于拓扑优化的机床床鞍创新构型设计[J].固体力学学报,2011,(S1):335-342 Zhang Y C, Cui L, Zhou L F, et al. Innovative structural design for bed saddle of machine based on topology optimization[J]. Chinese Journal of Solid Mechanics, 2011,(S1):335-342(in Chinese)
|
[9]
|
孙谦.弹性约束优化方法研究及床鞍单元化结构设计[D].大连:大连理工大学,2012 Sun Q. The study of optimization in elastic constraint condition and the modular structural design of the saddle bed[D]. Dalian:Dalian University of Technology, 2012(in Chinese)
|
[10]
|
李健,杨坤,韩建业.正交试验设计在TA2筒形件拉深成形过程中的应用[J].机械科学与技术,2010,29(3):323-328 Li J, Yang K, Han J Y. Application of orthogonal test to the deep drawing process of titanium alloy TA2 cylinder part[J]. Mechanical Science and Technology for Aerospace Engineering, 2010,29(3):323-328(in Chinese)
|
[11]
|
朱应敏,黄春跃,贾建援.基于正交试验方法的永磁微加速度开关结构参数对接触可靠性影响分析[J].机械科学与技术,2007,26(11):1434-1438 Zhu Y M, Huang C Y, Jia J Y. On influence of structural parameters of permanent magnetic micro-acceleration switch on its contact reliability[J]. Mechanical Science and Technology for Aerospace Engineering, 2007,26(11):1434-1438(in Chinese)
|
[12]
|
刘蕾,王永军,闵荣,等.基于响应面法的梯形直肋散热板优化设计[J].机械科学与技术,2011,30(7):1168-1170,1178 Liu L, Wang Y J, Min R, et al. Optimized design of trapezoidal straight fin heat sink based on RSM[J]. Mechanical Science and Technology for Aerospace Engineering, 2011,30(7):1168-1170,1178(in Chinese)
|
[13]
|
隋允康,宇慧平.响应面方法的改进及其对工程优化的应用[M].北京:科学出版社,2011 Sui Y K, Yu H P. Improvement on response surface methodology and application in engineering optimization[M]. Beijing:Science Publishing House, 2011(in Chinese)
|
[14]
|
薛彩军,谭伟,徐奋进,等.基于响应面模型的结构疲劳寿命优化方法[J].南京理工大学学报,2011,35(6):843-846 Xue C J, Tan W, Xu F J, et al. Structural fatigue life optimization method based on response surface model[J]. Journal of Nanjing University of Science and Technology, 2011,35(6):843-846(in Chinese)
|
[15]
|
马宝胜.响应面方法在多种实际优化问题中的应用[D].北京:北京工业大学,2007 Ma B S. The application of response surface methodology in some practical projects of optimization[D]. Beijing:Beijing University of Technology, 2007(in Chinese)
|