[1]
|
Greenwood J A, Tripp J H. The contact of two nominally flat rough surfaces[J]. Proceedings of the Institution of Mechanical Engineers, 1970,185(1):625-633
|
[2]
|
Greenwood J A, Williamson J B P. Contact of nominally flat surfaces[J]. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Sciences, 1966,295(1442):300-319
|
[3]
|
陈辉,胡元中,王慧,等.粗糙表面分形特征的模拟及其表征[J].机械工程学报,2006,42(9):219-223 Chen H, Hu Y Z, Wang H, et al. Simulation and characterization of fractal rough surfaces[J]. Chinese Journal of Mechanical Engineering, 2006,42(9):219-223(in Chinese)
|
[4]
|
马飞,杜三明,张永振.摩擦表面形貌表征的研究现状与发展趋势[J].润滑与密封,2010,35(8):100-103 Ma F, Du S M, Zhang Y Z. The research status and development tendency of friction surface topography characterization[J]. Lubrication Engineering, 2010,35(8):100-103(in Chinese)
|
[5]
|
Hamrock B J, Dowson D. Isothermal elastohydrodynamic lubrication of point contacts, Part Ⅲ-fully flooded results[J]. Journal of Lubrication Technology, 1977,99(2):264-275
|
[6]
|
温诗铸,杨沛然.弹性流体动力润滑[M].北京:清华大学出版社,1992 Wen S Z, Yang P R. Elastohydrodynamic lubrication[M]. Beijing:Tsinghua University Press, 1992(in Chinese)
|
[7]
|
Lubrecht A A, Venner C H, ten Napel W E, et al. Film thickness calculations in elastohydrodynamically lubricated circular contacts, using a multigrid method[J]. Journal of Tribology, 1988,110(3):503-507
|
[8]
|
Brandt A, Lubrecht A A. Multilevel matrix multiplication and fast solution of integral equations[J]. Journal of Computational Physics, 1990,90(2):348-370
|
[9]
|
Chao-Ho H, Rong-Tsong L. Advanced multilevel solution for elastohydrodynamic lubrication circular contact problem[J]. Wear, 1994,177(2):117-127
|
[10]
|
Lai Y G, Sui P C. A Finite-volume multigrid calculation method for elastohydrodynamically lubricated point contact problems[J]. Tribology Transactions, 1999,42(1):96-105
|
[11]
|
卢洪,杨沛然.用多重网格法准确计算弹流润滑膜厚度的方法[J].润滑与密封,2010,35(4):5-9 Lu H, Yang P R. An approach for accurately calculating the EHL film thicknesses with multi-grid method[J]. Lubrication Engineering, 2010,35(4):5-9(in Chinese)
|
[12]
|
Patir N, Cheng H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J]. Journal of Lubrication Technology, 1978,100(1):12-17
|
[13]
|
刘红斌,万大平,胡德金.分形表面接触变形对部分膜润滑的影响[J].摩擦学学报,2008,28(3):244-247 Liu H B, Wan D P, Hu D J. Influence of contact deformation of the fractal surfaces on the partial film lubrication[J]. Tribology, 2008,28(3):244-247(in Chinese)
|
[14]
|
Ng S H, Higgs C F, Yoon I, et al. An analysis of mixed lubrication in chemical mechanical polishing[J]. Journal of Tribology, 2005,127(2):287-292
|
[15]
|
Roelands C J A. Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils[D]. Netherlands, Deft University of Technology, 1966
|
[16]
|
Dowson D, Higginson G R. Elastohydrodynamic lubrication[M]. Oxford:Pergamon Press, 1970
|
[17]
|
杨沛然.流体润滑数值分析[M].北京:国防工业出版社,1998 Yang P R. Numerical analysis of fluid lubrication[M]. Beijing:National Defense Industry Press, 1998(in Chinese)
|