[1]
|
Li Y, Yang M S, Yuan Q L, et al. Study on the metal flowing of lead screw cold roll-beating forming[J]. Advanced Science Letters, 2011,4(6-7):1918-922
|
[2]
|
崔凤奎,朱文娟,王晓强,等.高速冷滚打成形技术研究现状与发展趋势[J].河南理工大学学报(自然科学版),2012,31(2):191-195 Cui F K, Zhu W J, Wang X Q, et al. Current research and development trends of high-speed cold rolling technology[J]. Journal of Henan Polytechnic University (Natural Science), 2012,31(2):191-195 (in Chinese)
|
[3]
|
杨合,孙志超,詹梅,等.局部加载控制不均匀变形与精确塑性成形研究进展[J].塑性工程学报,2008,15(2):6-14 Yang H, Sun Z C, Zhan M, et al. Advances in control of unequal deformation by locally loading and theories related to precision plastic forming[J]. Journal of Plasticity Engineering, 2008,15(2):6-14 (in Chinese)
|
[4]
|
王仲仁,滕步刚,汤泽军.塑性加工技术新进展[J].中国机械工程,2009,20(1):108-112 Wang Z R, Teng B G, Tang Z J. New development on technology of plasticity[J]. China Mechanical Engineering, 2009,20(1):108-112 (in Chinese)
|
[5]
|
李军超,毛锋,周杰.板材单点渐进成形工艺数值模拟与成形缺陷研究[J].热加工工艺,2010,39(5):71-75 Li J C, Mao F, Zhou J. Numerical simulation and flaws of sheet metal single-point incremental forming[J]. Hot Working Technology, 2010,39(5):71-75 (in Chinese)
|
[6]
|
杨建玺,崔凤奎,王晓强,等.冷滚轧滚轮设计理论及实验修正[J].中国机械工程,2004,15(24):2168-2171 Yang J X, Cui F K, Wang X Q, et al. Design theory and experimental amends of involute spline roller[J]. China Mechanical Engineering, 2004,15(24):2168-2171 (in Chinese)
|
[7]
|
崔凤奎,李言,周彦伟,等.渐开线花键滚轧轮建模及其修正[J].南京航空航天大学学报,2005,37(增刊):90-93 Cui F K, Li Y, Zhou Y W, et al. Roller modeling for involute spline and its amendment[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2005,37(S):90-93 (in Chinese)
|
[8]
|
张璐,李言,杨明顺,等.丝杠冷滚打成形过程金属流动规律研究[J].中国机械工程,2012,23(13):1623-1628 Zhang L, Li Y, Yang M S, et al. Study on metal flowing of lead screw cold roll-beating forming[J]. China Mechanical Engineering, 2012,23(13):1623-1628 (in Chinese)
|
[9]
|
Amirkhanlou S, Rezaei M R, Niroumand B, et al. High-strength and highly-uniform composites produced by compocasting and cold rolling processes[J]. Materials & Design, 2011,32(4):2085-2090
|
[10]
|
Csiszar G, Balogh L, Misra A, et al. The dislocation density and twin-oundary frequency determined by X-ray peak profile analysis in cold rolled magnetron-sputter deposited nanotwinned copper[J]. Journal of Applied Physics, 2011,110(4):502-507
|
[11]
|
李言,杨明顺,李玢,等.丝杠冷滚打成形动力学仿真及分析[J].西安理工大学学报,2009,25(4):383-387 Li Y, Yang M S, Li F, et al. Dynamics simulation and analysis of lead screw cold roll-beating[J]. Journal of Xi'an University of Technology, 2009,25(4):383-387 (in Chinese)
|
[12]
|
Jeswiet J, Geiger M, Engel U, et al. Metal forming progress since 2000[J]. CIRP Journal of Manufacturing Science and Technology, 2008,1(1):2-17
|
[13]
|
He W Y, Li Y, Yang M S, et al. Forming flaws analysis of lead screw cold roll-beating based on stress-strain evolution[J]. Sensors & Transducers, 2013,19(S):74-82
|
[14]
|
杨明顺,李言,袁启龙,等.板料冷滚打成形鳞纹影响因素解析及试验研究[J].机械科学与技术,2013,32(9):1363-1367 Yang M S, Li Y, Yuan Q L, et al. Theoretical analysis and experimental study on stripe of slab cold roll-beating[J]. Mechanical Science and Technology for Aerospace Engineering, 2013,32(9):1363-1367 (in Chinese)
|
[15]
|
崔凤奎,徐永福,赵魏.花键冷滚打和铣削加工的金属组织变形研究[J].锻压技术,2008,33(2):70-74 Cui F K, Xu Y F, Zhao W. Research on metal microstructure deformation of splines manufactured by cold rolling milling and cutting processes[J]. Forging & Stamping Technology, 2008,33(2):70-74 (in Chinese)
|