[1]
|
廖伯瑜,周新民,尹志宏.现代机械动力学及其工程应用:建模、分析、仿真、修改、控制、优化[M].北京:机械工业出版社,2004 Liao B Y, Zhou X M, Yin Z H. Modern machine dynamic mechanical and engineering application:modeling, analysis, simulation, modify, control and optimization[M]. Beijing:Machine Industry Press, 2004(in Chinese)
|
[2]
|
Mayer M H, Gaul L. Segment-to-segment contact elements for modelling joint interfaces in finite element analysis[J]. Mechanical Systems and Signal Processing, 2007,21(2):724-734
|
[3]
|
Bograd S, Schmidt A, Gaul L. Joint damping prediction by thin layer elements[C]//Proceedings of IMAC XXVI:A Conference & Exposition on Structural Dynamics, Orlando, Florida, USA, 2008
|
[4]
|
卫海桥,舒歌群.内燃机活塞拍击表面振动与燃烧噪声的关系[J].内燃机学报,2004,22(1):23-32 Wei H Q, Shu G Q. Study on the relation between piston impinging vibration and combustion noise of internal combustion engines[J]. Transactions of CSICE, 2004,22(1):23-32(in Chinese)
|
[5]
|
Gaul L, Schmidt A. Structural damping in mechanical joint connections[J]. MTZ Worldwide, 2012,73(5):60-64
|
[6]
|
Hess D P, Davis K. Threaded components under axial harmonic vibration, part 1:experiments[J]. Journal of Vibration and Acoustics, 1996,118(3):417-422
|
[7]
|
Hess D P, Sudhirkashyap S V. Dynamic loosening and tightening of a single-bolt assembly[J]. Journal of Vibration and Acoustics, 1997,119(3):311-316
|
[8]
|
El-Zahry R M. Optimum design of preloaded bolted joint under harmonic excitation[J]. Journal of Sound and Vibration, 1986,108(3):455-470
|
[9]
|
Foster C D, Mottershead J. A method for improving finite element models by using experimental data:application and implications for vibration monitoring[J]. International Journal of Mechanical Science, 1990,32(3):191-203
|
[10]
|
Ren Y, Beards C F. Identification of effective linear joints using coupling and joint identification techniques[J]. Journal of Vibration and Acoustics, 1998,120(2):331-338
|
[11]
|
陈学前,杜强,冯加权.螺栓连接非线性振动特性研究[J].振动与冲击,2009,28(7):196-198 Chen X Q, Du Q, Feng J Q. The study on the nonlinear vibration characteristic of bolt-joints[J]. Journal of vibration and shock, 2009,28(7):196-198(in Chinese)
|
[12]
|
Loibnegger B, Rainer G, Bernard L, et al. An integrated numerical tool for engine noise and vibration simulation[R]. SAE Technical Paper 971992, 1997
|
[13]
|
郝志勇,陈达亮.S1100型柴油机气缸体强度及优化分析[J].农业机械学报,2005,36(9):28-31 Hao Z Y, Chen D L. Structural strength analysis and lightweight design of S1100 diesel engine block[J]. Transactions of the Chinese Society for Agricultural Machinery, 2005,36(9):28-31(in Chinese)
|
[14]
|
Yoshimura T, Emoto Y. Steering and suspension system of a full car model using fuzzy reasoning based on single input rule modules[J]. International Journal of Vehicle Autonomous Systems, 2003,1(2):237-255
|
[15]
|
Su Q Z, Yin R P. Dynamic characteristic analysis for cylinder block of S100 diesel engine[C]//Proceedings of the 11th IMAC, 1993
|