Study on Disassembly Sequence Planning Method for Conceptual Design
-
摘要: 为了缩小产品拆卸序列筛选范围,简化拆卸序列计算方法,最终获得合理的目标拆卸序列,将骨架概念模型引入自顶向下产品设计过程中。骨架模型还包含了支持可拆卸分析的工程语义信息;将产品层次关系用无向图来表示,基于无向图转化所得的邻接矩阵、拆卸工程语义集合和骨架模型,快速准确地生成拆卸序列,实现产品早期研发阶段的可拆卸分析。
-
关键词:
- 拆卸序列 /
- 骨架模型 /
- 概念设计 /
- Top-down设计
Abstract: In order to narrow the product disassembly sequence screening range,to simplify disassembly sequence, and acquire the reasonable disassembly sequence ultimately,the skeleton conceptual models are introduced into the top-down process of product design in this paper. The basic functional-structural information and engineering semantic information which can support the disassembly analysis of products are included in the skeleton model. The product hierarchical relationship is represented by the undirected graph. Through the adjacency matrix which is transformed by undirected graph, disassemble semantic information and the skeleton model, the reasonable disassembly sequence can be acquired concurrently in the design phase of the conceptual design. Finally,this method is used in the bogie design of a high-speed train to verify its feasibility.-
Key words:
- algorithms /
- conceptual design /
- disassembly sequence /
- skeleton model
-
[1] 李瑞琴，邹慧君．机电一体化产品概念设计理论研究现状与发展展望[J]．机械设计与研究，2003，19(3): 10-14 Li R Q，Zou H J. Research situation and development prospect of theory on conceptual design of mechatronic products[J]. Machine Design and Research，2003，19(3): 10-14 (in Chinese) [2] 薛俊芳．机电产品拆卸过程建模与规划研究[D]．哈尔滨: 哈尔滨工程大学，2008 Xue J F. Research on disassembly process modeling and planning for electromechanical product[D]. Harbin:Harbin Engineering University，2008 (in Chinese) [3] 田颖．EOL 产品拆卸序列规划研究[D]．天津: 天津大学，2010 Tian Y. Research on EOL product disassembly sequence planning[D]. Tianjin: Tianjin University，2010 (in Chinese) [4] 丁勇．产品拆卸序列规划与维修性评价方法研究[D]．南京: 南京航空航天大学，2010 Ding Y. Research on product disassembly sequence planning and maintainability evaluation method[D]．Nanjing:NanJing University of Aeronautics and Astronautics，2010 (in Chinese) [5] 刘计娟．基于 Top-down 设计的装配模型建模方法研究[D]．南京: 河海大学，2007 Liu J J. The Study about modeling method of assembly model based on top-down design[D]. Nanjing: Hohai University，2007 (in Chinese) [6] Ratchev S. Precision assembly technologies for mini and micro products [M]. New York:Emerald Group Publishing Limited，2006 [7] 康兰．基于参数化技术的自顶向下装配建模研究[J]．机械设计与研究，2006，22(3): 75-77 Kang L. A study of top-down assembly modeling based on parametric technology[J]. Machine Design and Research，2006，22(3): 75-77 (in Chinese) [8] Demoly F，Toussaint L，Eynard B，et al. Geometric skeleton computation enabling concurrent product engineering[J].Computer-aided Design，2011: 1654-1673 [9] 郭伟祥，刘志峰，刘光复，等．基于模块化思想的拆卸序列规划[J]．计算机辅助设计与图形学学报，2005，17(3): 498-504 Guo W X，Liu Z F，Liu G F，et al. Disassembly sequence planning based on modularization[J]. Journal of Computer-aided Design and Computer Graphics，2005，17(3): 498-504 (in Chinese) [10] 王虎．基于 UG 的汽车产品拆解模型构建及信息提取方法研究[D]．长春: 吉林大学，2009 Wang H. Study on method of disassembly modeling and information acquiring for automobile product based on UG[D]. Changchun: Jilin University，2009 (in Chinese) [11] 江吉彬，刘志峰，刘光复．基于工程语义信息的拆卸序列规划算法研究[J]．计算机集成制造系统，2006，12(4): 625-629 Jiang J B，Liu Z F，Liu G F. Research on disassembly sequence planning algorithm based on engineering semantic information[J]. Computer Integrated Manufacturing Systems，2006，12(4): 625-629 (in Chinese) -
点击查看大图
计量
- 文章访问数: 91
- HTML全文浏览量: 20
- PDF下载量: 3
- 被引次数: 0
下载:
