基于ADAMS的橡胶合金滤波减速器动力学分析

崔洪斌; 王家序; 赵慧; 肖科; 余波; 杜海伟

doi:10.13433/j.cnki.1003-8728.2014.0506

基于ADAMS的橡胶合金滤波减速器动力学分析

doi: 10.13433/j.cnki.1003-8728.2014.0506

1.
重庆大学机械传动国家重点实验室, 重庆 400044;
2.
郑州煤矿机械集团股份有限公司, 郑州 450016

基金项目:

国家自然科学基金项目(50905189,50735008)

重庆市“两江学者”计划专项经费资助

详细信息

作者简介:
崔洪斌(1988-)，硕士研究生，研究方向为机械动力传动与运动控制，cqucuihongbin@163.com;王家序(联系人)，教授，博士生导师，jxwang@cqu.edu.cn

崔洪斌(1988-)，硕士研究生，研究方向为机械动力传动与运动控制，cqucuihongbin@163.com;王家序(联系人)，教授，博士生导师，jxwang@cqu.edu.cn

计量
- 文章访问数: 212
- HTML全文浏览量: 30
- PDF下载量: 3
- 被引次数: 0
出版历程
- 收稿日期: 2013-01-22
- 刊出日期: 2015-06-10

Dynamics Analysis of Rubber Alloy Filtering Gear Reducer Based on ADAMS

1.
The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044;
2.
Zhengzhou Coal Mining Machinery Group Co．Ltd, Zhengzhou 450016

摘要

摘要: 采用CAD软件Solidworks以及机械系统动力学仿真软件建立起橡胶合金滤波减速器以及未加橡胶合金层滤波减速器的三维仿真模型以及在ADAMS中建立了橡胶合金滤波减速器的刚柔混合模型。阐述了模型建立的方法及过程,利用ADAMS进行动态性能分析,分析对比了两者的输出内齿轮角速度,角加速度以及输出齿轮与双联齿轮之间啮合力,并对橡胶合金层进行位移分析,验证了橡胶合金滤波减速器在传动平稳性上的提升。
- 橡胶合金层 /
- 滤波减速器 /
- ADAMS /
- 动力学分析
Abstract: The rubber alloy filtering gear reducer and the filtering gear reducer without rubber alloy layer are established by using the CAD software Solidworks and the mechanical system dynamics simulation software ADAMS,then the rigid-flexible model of the rubber alloy filtering gear reducer is established by using ADAMS. The methods and processes of model establishment is expounded,the dynamic property is analyzed by using ADAMS. The angular velocity,angular acceleration of their output internal gear,the engaging force between the output internal gear and duplicate gear are compared. The displacement of rubber alloy layer is analyzed. The results verified the advance of rubber alloy filtering reducer in smooth transmission.
- ADAMS /
- angular velocity /
- computer simulation /
- computer software

HTML全文

参考文献(11)

[1]	Wang J X，Xiao K，Li M，et al. Innovation study on high performance filter transmission mechanism[J]．Journal of Advanced Maunfacturing Systems，2008，7(1): 157-160
[2]	陈卫平，张云清，任卫群，等．机械系统动力学分析与ADAMS 应用教程[M]．北京: 清华大学出版社，2005 Chen W P，Zhang Y Q，Ren W Q，et al. Mechanical system dynamics analysis and ADAMS application tutorial[M]. Beijing:Tsinghua University Press，2005(in Chinese)
[3]	崔清斌，吴大林，康海英．基于的齿轮传动系统动态特性仿真[J]．军械工程学院学报，2004，16(5): 9-11 Cui Q B，Wu D L，Kang H Y. Study on dynamics characteristics about gear transmission based on adams[J].Journal of Ordnance Engineering College，2004，16(5): 9-11 (in Chinese)
[4]	周广武，王家序，李俊阳，等．滤波减速器回差精度分析与控制[J]．中国科技论文在线，2010，5(8): 608-614 Zhou G W，Wang J X，Li J Y，et al. Analysis and control on the backlash of filtering gear reducer[J]．Sciencepaper Online，2010，5(8): 608-614 (in Chinese)
[5]	杜海伟．橡胶合金滤波减速器设计及传动性能分析[D].重庆: 重庆大学，2012 Du H W. Design and transmission performance analysis of rubber alloy filtering gearreducer chongqing[D]．Chongqing: Chongqing University，2012 (in Chinese)
[6]	唐增宝，钟毅芳．齿轮传动的振动分析与动态优化设计[M]．武汉: 华中理工大学出版社，1994 Tang Z B，Zhong Y F. Vibration analysis and dynamic optimization design of gear transmission[M]. Wuhan:Huazhong University of Technology Press，1994 (in Chinese)
[7]	姚娟．基于虚拟样机技术的减速器动力学仿真研究[ D].武汉: 武汉理工大学，2008 Yao J. Reducer dynamics simulation research based on virtual prototype technology [D]. Wuhan: Wuhan University of Technology，2008 (in Chinese)
[8]	潘继生，梁锡昌，阎秋生，等．基于 ADAMS 的新型滤波减速器的动力学分析[J]．机械，2009，36(1): 34-37 Pan J S，Liang X C，Yan Q S，et al. Dynamic analysis of the new type of filtering gear reducer based on ADAMS[J]. Machinery，2009，36 (1): 34-37 (in Chinese)
[9]	suta T，et al. Excitation force analysis of helical gear-pair with tolerances in their tooth shape and pitch，mounted on flexible shaft[C]// Hiroshima:MPT9l JSME International Conference on Motion and Power Transmssion，1991: 72-77
[10]	危自强，王家序，肖科，等．基于 ADAMS 的新型滤波传动件的动力学仿真研究[J]．机械传动，2010，34(6): 1-4 Wei Z Q，Wang J X，Xiao K，et al. Dynamics simulation research of a new type of filter transmission parts based on ADAMS[J]. Journal of Mechanical Transmission，2010，34(6): 1-4 (in Chinese)
[11]	李增刚．ADAMS 入门详解与实例[M]．北京: 国防工业出版社，2007 Li Z G. Introductory explanation and example for ADAMS[M]. Beijing: National Defence Industry Press，2007 (in Chinese)