Simulating Dynamic Characteristics of Retainer-roller-eccentric Arc Type Overrunning Clutch with ADAMS and ANSYS
-
摘要: 介绍了一种新型的围带滚柱式超越离合器工作原理,运用运动学仿真软件MSC.ADAMS和有限元分析软件ANSYS对其进行动力学仿真和关键零件的强度仿真,定量分析了各因素对离合器性能的影响。结果表明:适当增大滚柱与内座圈和外座圈之间的摩擦系数,可以略微减小滚柱楔合时的瞬时挤压力和空转角;滚柱数量的增多对离合器的承载性能有明显的提高;弹簧力的大小对滚柱受力没有影响,弹簧力越大,空转角越小。Abstract: The working principles of a new kind of retainer-roller-eccentric arc type overrunning clutch are presented.The effects of various factors on the clutch's performance are investigated quantitatively;its dynamic characteristics and its key components' strength are simulated with MSC.ADAMS and ANSYS.The simulation results indicate that: 1) the idle angle and transient stress of the roller decrease slightly with the proper increase of coefficients of friction among the roller,inner seat and outer seat;2) the increasing number of rollers significantly enhances the load-bearing capacity of the overrunning clutch;3) the larger the spring force,the smaller the idle angle,indicating that the spring force has little effect on the stress of the roller.The simulation results coincide with the actual working of the overrunning clutch.
-
[1] 黄家裕,钮心宪.超越离合器的力学分析[J].交通部上海船舶运输科学研究所学报,2000,23(2):76～83 [2] 朱春梅,孔炜.非接触式楔块超越离合器发展与原理[J].机械设计与制造,2005,(4):104～105 [3] 王金山,蒋艳英等.楔块式超越离合器径向变形评估研究[J].机械设计与制造,2008,(4):130～132 [4] 孙吉平,高志,黄靖远.链环式超越离合器自锁条件及数学模型[J].清华大学学报(自然科学版),2003,43(8):1031～1034 [5] 罗一新,禹金云.五滚柱式超越离合器外环拉伸应力计算研究[J].机械科学与技术,2002,21(4):549～550 [6] 潘钰娴,姜左.超越离合器滚动接触状态的三维有限元分析[J].中国制造业信息化,2003,32(12):108～110 [7] 徐秉夜,黄炎,刘信声.弹塑性力学及其应用[M].北京:机械工业出版社,1984 [8] 杨世明.滚柱超越离合器接合时空转角的分析[J].机械设计与研究,2003,19(6):51～52 [9] 陈殿华,贾卫平,田中道彦.单向离合器接触摩擦及承载性能的研究[J].润滑与密封,2007(3):192～195 [10] 黄华新,刘莹,权英华.超越离合器自锁本质辨析[J].机械传动,2007,31(1):55～57 -
点击查看大图
计量
- 文章访问数: 137
- HTML全文浏览量: 7
- PDF下载量: 3
- 被引次数: 0
下载:
