应力松弛成形二维温度场仿真研究

The Simulation of 2D Temperature Field in the Ageing Forming

1.
Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Ministry of Education, Xi'an 710072;
2.
Chengdu Aircraft Industrial(Group) Company Ltd, Chengdu 610000

摘要: 热压罐应力松弛成形的过程中,一个重要的工艺控制是使罐内的空气温度与模具场温度均匀一致。以流体力学经典理论算法为依据,应用软件Fluent对热压罐内的热空气流动进行二维简化模拟,研究送风速度、模具长度、模具开孔大小等因素对应力松弛成形温度场的影响。结果表明:送风速度对温度场影响较小,模具长度,模具开孔大小对温度场影响较大。
- 应力松弛成形 /
- 计算流体力学方法 /
- 温度场
Abstract: In the ageing forming of autoclave,one of the most important parameter control is to make the air temperature and mold temperature consistently.In this paper,based on the computational fluid dynamics(CFD) and the classic algorithm of fluid dynamics,the hot air fluid in autoclave is simulated by using a simplified two dimensional model and Fluent software.The effects of blowing-in velocity,length of mold,cut-out size and other factors on the temperature field of creep ageing forming are studied.The calculated results show that the effect of blowing-in velocity on the temperature filed is slight,that of length and cut-out size of mold,is great.
- ageing forming /
- CFD /
- temperature field

[1]	《航空制造工程手册》总编委会.航空制造工程手册:机钣金工艺[S].北京:航空工业出版社,1992
[2]	Kroeker C J,et al.Three-dimensional thermal analysis of heatsinks with circular cooling micro-channels[J].InternationalJournal of Heat and Mass Transfer,2004(47):4733～4744
[3]	Zhai Z Q,Chen Q Y.Numerical determination and treatment ofconvective heat transfer coefficient in the coupled building energyand CFD simulation[J].Building and Environment,2004,39(8):1001～1009
[4]	王永贵,梁宪珠,薛向晨等.热压罐工艺的传热分析和框架式模具温度场分布[J].航空制造技术,2008,(22)
[5]	陶文铨.传热学[M].西安:西北工业大学出版社,2006
[6]	杨世铭,陶文铨.传热学[M].北京:高等教育出版社,2006
[7]	赵玲.具有耦合传热的置换通风数值模拟及节能分析[D].西安建筑科技大学,2006
[8]	李娜.基于CBS有限元的流热固耦合计算方法研究[D].南京航空航天大学,2006