Effects of Shot Peening on Surface Integrity and Fatigue Properties of TC4 Titanium Alloy
-
摘要: 为了探讨喷丸强化对钛合金表面完整性及其疲劳行为的影响规律,采用扫描电子显微镜(SEM)、表面粗糙度仪、金相显微镜、显微硬度计及X射线应力测试仪等,分析了喷丸处理的TC4钛合金表面形态特征、表面粗糙度、表层金相组织、表层硬度以及表层残余应力分布,采用微机控制高频疲劳试验机评价了喷丸强化对TC4钛合金疲劳抗力的影响,探讨了喷丸试样表面完整性与疲劳抗力的内在联系及作用机制。结果表明:采用合理的喷丸强化工艺能够显著提高TC4钛合金的拉-拉疲劳抗力,以强度0.10 mmA～0.15 mmA、覆盖率100%的条件喷丸处理TC4钛合金,能够使其疲劳极限提高14.5%。然而,过高强度(0.15 mmA～0.20 mmA)的喷丸处理,并不能达到显著提高TC4钛合金疲劳抗力的目的。喷丸强化对TC4钛合金疲劳行为的影响归于喷丸对其表面完整性的影响,当喷丸引入的表面残余压应力及组织强化因素为主导时,钛合金疲劳抗力能够得到显著地提高。Abstract: In order to study the effects of shot peening on the surface integrity and fatigue properties of titanium alloy, we study the surface morphology, surface roughness, surface metallography, surface micro-hardness and surface residual stress of shot peened TC4 titanium alloy by using a scanning electron microscopy ( SEM), surface profile gauge, metallography microscopy, micro-hardness instrument and X-ray diffraction residual stress analyzer, etc. The fatigue resistance of titanium alloy is investigated by using microcomputer-controlled and high-frequency fatigue testing machine. The relationship between surface integrity and fatigue resistance is discussed. The investi-gation results show that the tension-tension fatigue resistance of TC4 titanium alloy can he greatly improved by reasonable shot peening. The fatigue limit improves by about 14.5% with the shot peening, including 0.10 mmA 0.15 mmA intensity and 100% coverage. However, the fatigue resistance of TC4 titanium alloy can not be significantly improved with the higher shot peening intensity of 0.15 mmA-0.20 mmA. The effect of shot peening on the fatigue property of TC4 titanium alloy is due to the effect of shot peening on its surface integrity. The fatigue resistance of TC4 titanium alloy improves significantly when the surface residual compressive stress and structural strengthening factors induced by shot peening are dominant.
-
Key words:
- TC4 titanium alloy /
- shot peening /
- fatigue property /
- surface integrity /
- residual stress /
- fatigue resistance
-
[1] 刘道新.材料的腐蚀与防护[M].西安:西北工业大学出版社,2006 [2] 刘道新,何家文.喷丸强化因素对Ti合金微动疲劳抗力的作用[J].金属学报,2001,37(2):156～160 [3] Jiang X P,Man C S,Shepard M J,et al.Effects of shot-peening and re-shot-peening on four-point bend fatigue behavior of Ti-6Al-4V[J].Materials Science and Engineering A,2007,(468-470):137～143 [4] 刘道新,何家文.经不同表面改性处理的钛合金的微动疲劳和微动磨损行为对比研究[J].摩擦学学报,2005,25(1):13～17 [5] 王仁智.工程金属材料/零件的表面完整性及其断裂抗力[J].中国表面工程,2011,24(5):55～57 [6] Gao Y K.Influence of shot peening on tension-tension fatigue property of two high strength Ti alloys[J].Surface Engineer-ing,2006,22(4):299～303 [7] Zhang X H,Liu D X.Effect of shot peening on fretting fatigue of Ti811alloy at elevated temperature[J].International Journal of Fatigue,2009,(31):889～893 [8] 高玉魁.喷丸强化对TC4钛合金组织结构的影响[J].稀有金属材料与工程,2010,39(9):1536～1539 [9] Albinali S.Effects of Temperature and Shot-peening Intensi-ty on Fretting Fatigue Behavior of Titanium Alloy Ti-6Al-4V[D].USA:Air Force Institute of Technology Air University,2005 [10] Tsuji N,Tanaka S,Takasugi T.Effects of combined plasma-car-burizing and shot-peening on fatigue and wear properties of Ti-6Al-4V alloy[J].Surface&Coatings Technology,2009,(203):1400～1405 [11] Xie L C,Jiang C H,Lu W J.Investigation on the residual stress and microstructure of(TiB+TiC)/Ti-6Al-4V composite after shot peening[J].Materials Science and Engineering A,2011,528:3423～3427 [12] S.Suresh著.王中光等译.材料的疲劳[M].北京:国防工业出版社,1998 [13] 刘道新,陈华,何家文.等离子氮化与喷丸强化复合改进钛合金抗微动损伤性能[J].材料热处理学报,2001,22(3):49～53 [14] 杜东兴,刘道新,孙瑜峰等.航空用TC18钛合金的车削加工工艺技术研究[J].机械科学与技术,2011,30(11):1805～1810 -
点击查看大图
计量
- 文章访问数: 101
- HTML全文浏览量: 11
- PDF下载量: 4
- 被引次数: 0
下载:
