斜齿轮成形磨削接触线优化研究

基金项目:

江苏省科技型企业技术创新项目(BC2009012)

南京市2010年第二批科技发展计划项目(201002006)资助

Optimization of Contact Line for Form Grinding of Involute Helical Gears

1.
Department of Mechanical Engineering, Nanjing University of Technology, Nanjing 210009

摘要: 针对成形磨削斜齿轮中接触线对磨削不平衡力、磨削加工效率以及导程修整的影响,根据成形磨削啮合原理求出砂轮与齿面之间的接触线,通过对接触线性质的分析,得到砂轮安装偏转角的变化对接触线的影响规律。基于加权平方和的优化方法,对影响接触线变化的砂轮参数进行了优化,并设计出模拟仿真程序,可用于对接触线的优化调整。较传统的砂轮安装偏转角经验取值法,本文优化结果更加精确可靠。
- 成形磨削 /
- 接触线 /
- 砂轮偏转角 /
- 优化
Abstract: Considering the effect of contact line on grinding unbalanced force, grinding efficiency and lead modification, the contact line between grinding wheel and tooth face was drawn based on the principle of form grinding. By analyzing the nature of contact line, the impact of wheel inclination angle changing for contact line was obtained. At the same time, the inclination angle has been optimized by weighted sum-squared method, and the designed simulation program can be used to optimize adjustment of contact line. Compared with the traditional empiri-cal method to determine the inclination angle, the optimized inclination angle were more accurate and reliable.
- form grinding /
- contact line /
- inclination angle /
- optimal algorithm

[1]	李儒荀.刀具设计原理与计算[M].南京:江苏科学技术出版社,1985
[2]	Nishida,et al.Method of Working a Helical Gear by Grind-ing[P].US,5681207,1997-10-28
[3]	吴序堂.齿轮啮合原理[M].北京:机械工业出版社,2009
[4]	苏建新,邓效忠等.斜齿轮成形磨削砂轮修形与仿真[J].农业机械学报,2010,41(10):119～222
[5]	孟石如.高精度、大模数、大螺旋角渐开线螺旋齿轮的成形磨削[J].机械传动,1983,(1):28～37
[6]	王进猷,钟运来等.成型磨齿法磨轮外形的新算法[A].第一届技专院校产学合作与技术转移成果发布会[C],台湾,2001
[7]	Chiang C J,Fong Z H.Undercutting and interference for threadform grinding with a tilt angle[J].Mechanism and MachineTheory,2009,(44):2066～2078