基于冗余伺服电机法的弹性连杆机构的平衡

欧玉俊; 孙志宏; 章文俊; 李志瑶; 徐继

基于冗余伺服电机法的弹性连杆机构的平衡

1.
东华大学纺织装备教育部工程研究中心, 上海 201620;
2.
萨斯喀切温大学工程学院, 萨斯喀切温省 S7N 5A9;
3.
上海电视大学松江分校信息工程组, 上海 201620

详细信息

作者简介:
欧玉俊(1986-)，硕士研究生，研究方向为机械设计及理论，ouyujun627@163.com;孙志宏(联系人)，教授，博士，zhsun@dhu.edu.cn

欧玉俊(1986-)，硕士研究生，研究方向为机械设计及理论，ouyujun627@163.com;孙志宏(联系人)，教授，博士，zhsun@dhu.edu.cn

计量
- 文章访问数: 162
- HTML全文浏览量: 19
- PDF下载量: 3
- 被引次数: 0
出版历程
- 收稿日期: 2011-09-04
- 刊出日期: 2015-06-10

Study on the Dynamic Balance of Elastic Linkages Based on the Redundant Servo Motor Approach

1.
Engineering Research Center of Advanced Textile Machinery Ministry of Education, Donghua University, Shanghai 201620;
2.
College of Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada;
3.
Information Engineering Group, Songjiang Television University, Shanghai 201620

摘要

摘要: 冗余伺服电机法(redundant servo motor)对机构进行动力学平衡的本质是伺服电机的转速可以实时改变,这对于机构的运动学性能来说可能是冗余的,但却可以用来改善机构的动力学性能。本文中讨论了将冗余伺服电机法应用于弹性连杆机构的动力学平衡中,并以一个平面弹性四杆机构为例,建立了其弹性动力学平衡优化模型,阐明了该方法的平衡原理,以5种运动规律对此机构进行了优化。优化结果表明,该方法对弹性连杆机构的震动力和震动力矩的平衡效果较好,与在机构上附加一个额外驱动器的方法相比,该方法更显优越。
- 冗余伺服电机法 /
- 弹性连杆机构 /
- 动力学平衡 /
- 震动力 /
- 震动力矩
Abstract: The Redundant Servo Motor (RSM) Approach is applied to the dynamic balance of elastic linkage mechanism. The principle of RSM is that the real-time variable speed of motor may be redundant to kinematic mo-tion generation of a mechanism and utilized for the purpose of dynamic balance of mechanism. The RSM procedure ~'s applied to a four-bar elastic linkage (as an example). Its elastic dynamic optimization model is established and the balance principle of the present approach is illustrated. Five kinds of motion have been carried on the optimiza-lion model. The simulation result has shown the effectivity on the balance of shaking force and shaking moment and also a great promise by comparing it with the approach which adds an extra servomotor in the mechanism.
- RSM /
- elastic linkage mechanism /
- dynamic balance /
- shaking force /
- shaking moment

HTML全文

参考文献(8)

[1]	何亚银,吴立言,庞亮亮.平面连杆机构动力平衡的研究进展[J].陕西理工学院学报2005,21(4):7～10
[2]	余跃庆,古英.弹性机构动力平衡的有效新方法[J].机械科学与技术1998,17(1):1～4
[3]	Thomas T.Dynamic balancing of linkages by active control withredundant drives[A].9th World Congress on InternationalFederation for the Promotion of Mechanism and Machine Sci-ence(IFToMM)[C],Mailand,1995:970～974
[4]	Yu Y Q,Lin J.Active balancing of a flexible linkage with redundantdrives[J].Journal of Mechanical Design,2003,125
[5]	Yu Y Q,Jiang B.Analytical and experimental study on the dy-namic balancing of flexible mechanisms[J].Mechanism andMachine Theory,2007,42(5):626～635
[6]	Sun Z H,Zhang B,Huang J,Zhang W J.On a mechatronics ap-proach to balancing of robotic mechanisms:redundant servo motor[A].Proceedings of International Conference on AdvancedMechatronics[C],Osaka,Japan,2010:675～680
[7]	张策等.弹性连杆机构的分析与设计[M].北京:机械工业出版社,1997
[8]	Sun Z H,Zhang B,Cheng L,Zhang W J.Application of the re-dundant servomotor approach to design of path generator with dy-namic performance improvement[J].Mechanism and MachineTheory,2011,46(11):1784～1795