The Kinematic Accuracy of Locking Mechanism for Aircraft's Cargo Door Based on Structural Errors
-
摘要: 由于外界环境及设计制造等因素影响,空间飞行器货舱门锁机构各构件间的运动尺寸会产生变形和误差,引起锁机构运动规律改变,导致锁机构失效。建立了基于各构件尺寸误差的货舱门锁机构运动精度模型,研究了实际工作情况中6个构件尺寸及输入角度误差对机构输出位置的误差影响,给出了货舱门锁机构的运动精度。结果表明:在锁钩工作范围内,锁机构杆1和杆3的尺寸误差对锁钩的理想工作位置影响最大,制造时需对其误差加以控制。Abstract: Because of influences of external environment,design manufacture and other factors,every component's transmission size of spacecraft cargo door locking mechanism should produce deformation and error.It should change motion law of locking mechanism and lead to failure.The kinematic accuracy model of cargo door locking mechanism was built based on every component's size error.Every component's size and error of input angle on error influences of mechanism output position were studied in actual working status.And the kinematic accuracy of cargo door locking mechanism was given.The results show that the size error of locking mechanism's bar 1 and bar 3 for latch hook's ideal working position has most influence on its working range.So their errors should be controlled at machining.
-
Key words:
- aviation aircraft /
- cargo door /
- locking mechanism /
- structural errors /
- kinematic accuracy
-
[1] 张鹏. 大型运输机货舱门锁机构可靠性研究[J].飞机工程,2006,(02):22-25. [2] 赵罡,王超,于红亮. 基于神经网络和遗传算法的公差优化设计[J].北京航空航天大学学报,2010,(05):518-523. [3] 杨玉虎,洪振宇,张策. 机构位置误差分析的传递矩阵法[J].机械工程学报,2005,(02):20-23. [4] 谢小正,杨东亚,强建国. 基于运动连接的机构尺寸误差分析[J].兰州理工大学学报,2007,(03):46-49. [5] Tsai M J,Lai T H. Kinematic sensitivity analysis of linkage with joint clearance based on transmission quality[J].Mechanism and Machine Theory,2004,(11):1189-1206. [6] 杨强,孙志礼,闫明. 改进Delta并联机构运动可靠性分析[J].航空学报,2008,(02):705-712. [7] Wang S M,Ehmann K F. Error model and accuracy analysis of a six-dof Stewart platform[J].JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2002,(02):286-296. [8] 陈建军,陈勇,崔明涛. 基于运动精度可靠性的平面四杆机构优化设计[J].机械科学与技术,2002,(06):740-743. [9] 张义民,黄贤振,贺向东. 不完全概率信息牛头刨床机构运动精度可靠性稳健设计[J].机械工程学报,2009,(04):105-110. [10] Kral S. Kinematic accuracy and dynamic properties of gearing[A].2004.201-205. [11] Tan Y S. Mathematical model for the effect of dynamic parameter posed on free floating space manipulator's kinematic accuracy[J].Optical Electronic Materials and Applications,2011.2545-2260. [12] Li B. Reliability analysis of kinematic accuracy of a three degree-of-freedom paraltel manipulator[J].Advanced Materials Re-search,2010.743-747. -
点击查看大图
计量
- 文章访问数: 192
- HTML全文浏览量: 41
- PDF下载量: 11
- 被引次数: 0
下载:
