Influence of Shot Peening and Surface Integrity on Fatigue Properties of TC21 Titanium Alloy
-
摘要: 研究了喷丸强化与表面完整性对TC21钛合金疲劳性能的影响规律。利用X射线应力仪、粗糙度仪、扫描电子显微镜、显微硬度计等分析了喷丸强化对TC21钛合金表面残余应力场、表面粗糙度、表面形态特征及表面加工硬化的影响作用,探讨了喷丸强化对TC21钛合金疲劳抗力的作用机制。结果表明:优化工艺参数下的喷丸强化能够显著提高TC21钛合金的疲劳抗力,然而并不是喷丸强度越高强化效果越好,而是存在着最佳的喷丸强化参数,此条件下可获得良好的表面完整性,因而疲劳抗力亦高。过高强度的喷丸处理破坏了钛合金的表面完整性,反而损害钛合金的抗疲劳性能。因此,在喷丸强化工艺参数选取时,不宜盲目地追求过高的喷丸强度,而忽视钛合金的表面完整性。Abstract: The influence of shot peening intensity,and surface integrity on fatigue properties of TC21 titanium alloy was studied to improve fatigue resistance of the high strength titanium alloy.The influence of shot peening on surface residual stress,surface roughness,surface morphology and surface hardness was studied by using X-ray diffraction analysis,surface profile measurement,scanning electron microscopy and microhardness instrument,etc.The mechanism of fatigue resistance improved by shot peening was also discussed.The results reveal that the effect of fatigue properties can be obviously improved by optimized shot peening process.But the fatigue properties is not a simple monotonic variation with shot peening intensity.The surface integrity and fatigue resistance are the most optimum in a certain shot peening parameters,while they will be decreased by exorbitant shot peening intensity.Therefore,when choosing shot peening parameters,it is blinded to merely pursue exorbitant intensity and ignore the surface integrity of metal materials.
-
Key words:
- TC21 titanium alloy /
- shot peening /
- fatigue property /
- surface integrity /
- fatigue resistance
-
[1] 赵永庆,曲恒磊,冯亮. 高强高韧损伤容限型钛合金TC21研制[J].钛工业进展,2004,21(1):22-24 [2] Qu H L,Zhou Y G,Zhou L. Relationship among forgingtechnology,structure and properties of TC21 alloy bars[J].Transactiongs of Nonferrous Metals Society of China,2005,15(5):1120-1124 [3] 陶春虎,刘庆瓌,曹春晓. 航空用钛合金零件的失效及其预防[M].北京:国防工业出版社,2002 [4] 刘道新,何家文. 经不同表面改性处理的钛合金的微动疲劳和微动磨损行为对比研究[J].摩擦学学报,2005,(01) [5] Zhang X H,Liu D X. Effect of shot peening on fretting fatigue ofTi811 alloy at elevated temperature[J].Internationa)Journalof Fatigue,2009,31(5):889-893 [6] 刘道新. 材料的腐蚀与防护[M].西安:西北工业大学出版社,2006 [7] 宋颖刚,高玉魁,陆峰. TC21钛合金喷丸强化层微观组织结构及性能变化[J].航空材料学报,2010,30(2):40-44 [8] 高玉魁. 喷丸强化对TC21高强度钛合金疲劳性能的影响[J].金属热处理,2010,35(8):30-32 [9] 任亮,刘道新,张晓化. Mo电极电火花强化与喷丸复合提高Ti合金微动疲劳抗力[J].中国有色金属学报,2007,12(17):2017-2022 [10] 刘道新,陈华,何家文. 等离子氮化与喷丸强化复合改进钛合金抗微动损伤性能[J].材料热处理学报,2001,22(3):49-53 [11] Fathallah R,Laamouri A,Sidhom H. High cycle fatigue behav-ior prediction of ahot-peened parts[J].International Journal ofFatigue,2004,26(3):1053-1067 [12] 李瑞鸿,刘道新,张炜. 喷丸强化与表面完整性对300M钢疲劳性能的影响[J].机械科学与技术,2011,30(9):1418-1423.
点击查看大图
计量
- 文章访问数: 167
- HTML全文浏览量: 42
- PDF下载量: 5
- 被引次数: 0