Exploring Chaos in Manufacturing System Based on Phase Space Reconstruction
-
摘要: 针对制造企业的生产效率时间序列体现的非线性的确定而又类似随机的特点,提出了基于相空间重构的制造系统的混沌研究方法。利用互信息法和CAO氏方法分别确定最佳延迟时间和最小嵌入维数,利用生产效率时间序列对制造系统相空间重构,通过Grassberger-Procac-cia算法和小数据量方法计算关联维数和最大Lyapunov指数这两个非线性特征量,结果表明制造企业在运行过程中出现混沌现象。
-
关键词:
- 制造系统 /
- 相空间重构 /
- 混沌 /
- 关联维数 /
- 最大Lypunove指数
Abstract: For considering the characteristics of nonlinear time series and randomness,the phase space recon-struction method was put forward to study the chaos of a manufacturing system. Mutual information method andCAO's methods were used to determine the best delay time and the minimum number of embedding dimensions.The manufacturing system received phase space reconstruction under the time series of production efficiency.Then the number of correlation dimensions and maximum Lyapunov index were calculated by using Grassberger-Procaccia method and small data method. The calculation results show that chaos occur in the operation of a man-ufacturing system. -
[1] Gu X J,Qi G N, Hu Y H.The research of the CIMS bionic refer-ence architecture in chaos environment[A].IEEE InternationalConference on Networking,Sensing and Control[C], 2005:1021~1026 [2] 徐浩鸣.混沌学与协同学在我国制造业产业组织的应用[D].哈尔滨工程大学, 2002 [3] 姜继娇, 杨乃定, 贾晓霞.基于混沌理论的企业集成风险预警机制研究[J].科学与科学技术管理, 2003, 10:97~101 [4] Katzorke I,Pikovsky A.Chaos and complexity in a simple modelof production dynamics[J].Discrete Dynamics in Nature andSociety, 2000, (5):179~187 [5] Chryssolouris G,Giannelos N,et al.Chaos theory in productionscheduling[J].CIRP Annals-manufacturing Technology,2004, 53(1):381~383 [6] 张强, 李立华.基于相空间重构技术的金融系统混沌识别[J].经济数学, 2011, 28(6):41~44 [7] 张涛, 吴令红.大型复杂机械系统相空间的重构技术研究[J].机械工程师, 2009, (5):45~47 [8] 吴立辉, 张洁.基于相空间重构的半导体制造系统日产出预测[J].机械工程学报, 2009, 45(8):176~182 [9] Takens M F.Dynamical Systems of Turbulence[M].Berlin:Springer, 1981 -
![WeChat](/fileJXKXYJS/journal/article/jxkxyjs/2013/2/PIC/wechat_cn_5405.jpg)
计量
- 文章访问数: 167
- HTML全文浏览量: 29
- PDF下载量: 4
- 被引次数: 0