[1]
|
Slatter T,Taylor H,Lewis R,et al.The influence of laser hardening on wear in the valve and valve seat contact[J].Wear,2009,267:797-806
|
[2]
|
Peter G,Joh C S.Wear in check valves due to flow induced motion[J].Nuclear Engineering and Design,2003,115(2-3):323-330
|
[3]
|
Carrera E,Rodrguez A,Talamantes J.Measurement of residual stresses in cast aluminium engine blocks[J].Journal of Materials Processing Technology,2007,189:206-210
|
[4]
|
Gurrappa I.An oxidation model for predicting the life of titanium alloy components in gas turbine engines[J].Journal of Alloys and Compounds,2005,389:190-197
|
[5]
|
Yildiz F,Yetim A F,Alsaran A,et al.Wear and corrosion behaviour of various surface treated medical grade titanium alloy in bio-simulated environment[J].Wear,2009,267:695-701
|
[6]
|
Nolan D,Huang S W,Leskovsek V,et al.Sliding wear of titanium nitride thin films deposited on Ti-6Al-4V alloy by PVD and plasma nitriding processes[J].Surface and Coatings Technology,2006,200:5698-5705
|
[7]
|
Fan W D,Jagannadham K,Narayan J.Adhesion of diamond films on Ti-6Al-4V alloys[J].Surface and Coatings Technology,1997,91:32-36
|
[8]
|
Vásqueza V Z,Ozcan M,Kimpara E T.Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal-and mechanical-loading[J].Dental Materials,2009,25(2):221-231
|
[9]
|
Xu Z,Liu X,Zhang P.Double glow plasma surface alloying and plasma nitriding[J].Surface and Coatings Technology,2007,201:4822-4825
|
[10]
|
Zhecheva A,Shaa W,Malinov S,et al.Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods[J].Surface and Coatings Technology,2005,200:2192-2207
|
[11]
|
刘道新,陈华,何家文.等离子渗氮与喷丸强化复合改进钛合金抗微动损伤性能[J].材料热处理学报,2001,22(3):49-54Liu D X,Chen H,He J W.The effect of plasma nitriding and shot peening on the fretting damage resistance of Ti alloy[J].Transactions of Materials Heat Treatment,2001,22(3):49-54(in Chinese)
|
[12]
|
刘国华,刘道新,张晓化,等.Cu/Ni多层膜在多冲与压压载荷下的失效行为[J].中国表面工程,2009,22(2):31-36Liu G H,Liu D X,Zhang X H,et al.Failure behavior of Cu/Ni multilayer under multiple impacting and repeating press load[J].China Surface Engineering,2009,22(2):31-36(in Chinese)
|
[13]
|
Zhang S,Sun D,Fu Y Q.Toughness measurement of thin films:a critical review[J].Surface and Coatings Technology,2005,198:74-84
|
[14]
|
Luo J B,Liu S.The investigation of contact ratio in mixed lubrication[J].Tribology International,2006,39:409-416
|
[15]
|
温诗铸,黄平.摩擦学原理[M].北京:清华大学出版社,2002Wen S Z,Huang P.Tribology theory[M].Beijing:Tsinghua University Press,2002(in Chinese)
|