汽车囊式空气弹簧变刚度特性拟合分析

高扬; 方宗德; 祝小元; 卞翔

汽车囊式空气弹簧变刚度特性拟合分析

1.
西北工业大学机电学院, 西安 710072

基金项目:

西北工业大学研究生创业种子基金项目(z2012027)资助

详细信息

作者简介:
高扬(1988-)，硕士，研究方向为车辆动力学，sungod-007@163.com;方宗德(联系人)，教授，博士生导师，fauto@nwpu.edu.cn

高扬(1988-)，硕士，研究方向为车辆动力学，sungod-007@163.com;方宗德(联系人)，教授，博士生导师，fauto@nwpu.edu.cn

计量
- 文章访问数: 237
- HTML全文浏览量: 29
- PDF下载量: 9
- 被引次数: 0
出版历程
- 收稿日期: 2012-12-05
- 刊出日期: 2015-06-10

Fitting Analysis on Stiffness Variation Property for Bellows Type Air Spring of Vehicles

1.
School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072

摘要

摘要: 空气弹簧的变刚度特性对悬架系统动力学研究有着重要影响,而制造商所提供的空气弹簧实验特性曲线图并不能完全反映这一特性。结合理想气体状态方程确立了空气弹簧刚度与形变量的多项式方程。通过有限元仿真得到空气弹簧动态特性曲线并进行弹簧刚度的多项式拟合,在确定悬架动力学仿真模型的基础上,研究了定压条件下,不同初始高度(初始负载)对空气弹簧变刚度特性曲线的影响,并将理论刚度变化曲线与仿真刚度变化曲线进行比对,得出实际空气弹簧承载刚度值比理论工况下大,实际刚度变化曲线不等于理论公式中依照形变量偏移后的刚度曲线这一结论。
- 汽车 /
- 空气弹簧 /
- 刚度 /
- 多项式拟合 /
- 动力学仿真
Abstract: The stiffness variation of air spring has a great impact on the analysis and dynamic modeling of vehicle suspension system, while the experimental characteristics curve of the air spring provided by the manufacturer cannot reflect its property. The state equation of ideal gas was used to establish the polynomial equation for the spring stiffness and deformations. The dynamic characteristics curve of air spring was obtained by finite element simulation and the stiffness property was fitted with polynomial. Based on the simulation models of suspension dynamics, thee ffect of different initial spring height on the stiffness variation property curve of air spring was studied in the condi-tion of constant pressure. The theoretical stiffness curve was compared with the simulated one. The results show that the stiffness values of loaded air spring in actual conditions are larger than the theoretical values and the actual stiff-ness variation curve is not to the same as the curve shifted by the deformation in the theoretical formulation.
- ABAQUS /
- automobile suspensions /
- computer simulation /
- equations of state of gases /
- kinematics

HTML全文

参考文献(9)

[1]	陈一锴,何杰,李旭宏,等.基于模糊控制的重型货车空气悬架性能多目标优化[J].东南大学学报,2008,38(2):320-323Chen Y K,He J,Li X H,et al.Integrated performance optimum design of heavy truck air suspension based on fuzzy control[J].Journal of Southeast University(Natural Science Edition),2008,38(2):320-323(in Chinese)
[2]	陈燎,周孔亢,李仲兴.空气弹簧动态特性拟合及空气悬架变刚度计算分析[J].机械工程学报,2010,46(2):93-98Chen L,Zhou K K,Li Z X.Dynamic characteristics fitting of air springs and numerical analysis of air suspensions with variant stiffness[J].Journal of Mechanical Engineering,2010,46(2):93-98(in Chinese)
[3]	尹万建.汽车空气弹簧悬架系统的非线性动力学行为研究[D].北京:北京交通大学,2007Yin W J.Investigation on nonlinear dynamical behavior in automobile air spring suspension system[D].Beijing:Beijing Jiaotong University,2007(in Chinese)
[4]	Liu H W,Zhuang D J,Lin Y.A study on nonlinear stiffness characteristic of air spring for a bus[R].SAE Paper,2002-01-3092
[5]	袁春元,周孔亢,吴琳琪.车用空气弹簧有限元分析方法[J].机械工程学报,2009,45(6):262-266Yuan C Y,Zhou K K,Wu L Q.Finite element method to analyze vehicle air spring[J].Journal of Mechanical Engineering,2009,45(6):262-266(in Chinese)
[6]	郑明军,陈潇凯,林逸.空气弹簧力学模型与特性影响因素分析[J].农业机械学报,2008,39(5):10-14Zheng M J,Chen X K,Lin Y.Dynamical model and characteristics analysis of air spring[J].Transactions of the Chinese Society for Agricultural Machinery,2008,39(5):10-14(in Chinese)
[7]	Nieto A J,Morales A L,Gonzalez A.An analytical model of pneumatic suspension based on an experimental characterizaiton[J].Journal of Sound and Vibration,2008,313:290-307,2009
[8]	Butsuen T.The design of semi-active suspensions for automotive vehicles[D].Massachusetts:Massachusetts Institute of Technology,1989
[9]	喻凡,林逸.汽车系统动力学[M].北京:机械工业出版社,2005Yu F,Lin Y.Automotive system dynamics[M].Beijing:China Machine Press,2005(in Chinese)