数字样机技术在电磁阀设计开发中的应用

蔺帅南; 张晓东; 王平阳; 刘亦鹏

数字样机技术在电磁阀设计开发中的应用

1.
上海交通大学机械与动力工程学院, 上海 200240;
2.
上海空间推进技术研究所, 上海 201112

详细信息

作者简介:
蔺帅南(1987-)，硕士研究生，研究方向为星载阀门的仿真，journallsn@163.com;王平阳(联系人)，博士，副教授，硕士生导师，wangpy@sjtu.edu.cn

蔺帅南(1987-)，硕士研究生，研究方向为星载阀门的仿真，journallsn@163.com;王平阳(联系人)，博士，副教授，硕士生导师，wangpy@sjtu.edu.cn

计量
- 文章访问数: 179
- HTML全文浏览量: 26
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2012-10-14
- 刊出日期: 2015-06-10

Application of Digital Prototyping Technology in Design and Development of Electromagnetic Valves

1.
School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240;
2.
Shanghai Institute of Space Propulsion, Shanghai 201112

摘要

摘要: 为了有效减少电磁阀结构设计开发中的简单重复劳动以提高设计效率、降低成本,通过参数化仿真手段,建立了基于Visual C++的电磁阀数字样机。该数字样机可以对电磁阀设计开发的整个流程进行监控和操作,包括结构参数的工程计算、应用Pro/E进行三维参数化建模,CFD软件进行流动阻力仿真计算,Maxwell软件进行电磁仿真计算和Ansys软件进行结构仿真计算。最后采用单阀座直动式电磁阀的实测数据以及文献相关数据对数字样机的性能仿真结果进行验证,表明建立的数字样机具有良好的可靠性。
- 数字样机技术 /
- 电磁阀 /
- Visual C++ /
- 参数化建模 /
- 性能仿真
Abstract: In order to minimize the simple duplication of effort, reduce development cost and improve efficiency in the design and development of electromagnetic valves, a digital prototype based on Visual C++ was established by means of parametric simulations. The digital prototype can monitor and manipulate the entire process of design and development of the electromagnetic valves. This process includes engineering calculation for structural parameters, parametric 3D-modeling by Pro/E, and calculation for flow resistance by CFD, electromagnetic distribution by Maxwell software and structural strength verification by ANSYS software. Finally, the measured data of the single-seal direct-acting electromagnetic valve and data cited from references are used to verify the performance simulation results of the digital prototype. The verification demonstrates that the digital prototype developed in thre present study has good reliability.
- calculations /
- computational fluid dynamics /
- computer programming languages /
- computer simulation /
- computer software

HTML全文

参考文献(11)

[1]	武美萍,彦文和.虚拟产品开发管理技术在直升机数字样机开发中的应用研究[J].机械科学与技术,2008,27(5):633-639Wu M P,Yan W H.Application of vitual product development management to the research and development of helicopter digital mock-up[J].Mechanical Science and Technology for Aerospace Engineering,2008,27(5):633-639(in Chinese)
[2]	王亚军,陆豪,赵守军,等.数字样机技术在某型号运载火箭伺服机构设计中的应用[J].宇航学报,2009,30(1):104-108Wang Y J,Lu H,Zhao S J,et al.Applications of digital prototype technique in the design of servo mechanism of some launch vehicle[J].Journal of Astronautics,2009,30(1):104-108(in Chinese)
[3]	郑耀.面向新型飞行器应用的数值模拟与数字样机技术[J].航空制造技术,2009,21:26-29Zheng Y.Enabling technologies of numerical simulations and digital prototyping for new aerospace vehicles[J].Aeronautical Manufacturing Technology,2009,21:26-29(in Chinese)
[4]	王荣智,任小中,裴学胜,等.数字样机技术在城市客车车身开发中的应用[J].拖拉机与农用运输车,2010,37(2):82-86Wang R Z,Ren X Z,Pei X S,et al.Application of digital prototyping technology in development of city bus body[J].Tractor and Farm Transporter,2010,37(2):82-86(in Chinese)
[5]	朱金光,冷峻,丁雄飞,等.玉米联合收获机整机数字化虚拟样机通过性仿真分析与试验的研究[J].农业机械,2009:98-101Zhu J G,Leng J,Ding X F,et al.Analysis and simulation test by corn harvester machine digital prototyping technology[J].Farm Machinery,2009:98-101(in Chinese)
[6]	张青雷,郭井宽.兆瓦级风力发电机组的数字化设计技术应用[J].上海电机学院学报,2011,14(3):203-206Zhang Q L,Guo J K.Application of digitzed design to MW grade wind turbine[J].Journal of Shanghai Dianji University,2011,14(3):203-206(in Chinese)
[7]	Pomar J,Lopez V,Pomar C.Agent-based simulation framework for virtual prototyping of advanced livestock precision feeding systems[J].Computers and Electronics in Agriculture,2011,(78):88-97
[8]	Li H,Chan N K Y,Huang T,et al.Virtual prototyping for planning bridge construction[J].Automation in Construction,2012,(27):1-10
[9]	杨云斌,王峰军,韦力凡,等.数字样机技术在复杂产品工程设计中的应用研究[J].机械设计与制造,2012,(4):253-255Yang Y B,Wang F J,Wei L F,et al.Study on application of digital prototyping technology in engineering design for complex product[J].Machinery Design and Manufacture,2012,(4):253-255(in Chinese)
[10]	柳忠彬,何庆中,张应迁,等.阀门快速设计分析方法研究[J].机械设计与制造,2010,10:4-6Liu Z B,He Q Z,Zhang Y Q,et al.The research of valve rapid design and analysis method[J].Machinery Design and Manufacture,2010,10:4-6(in Chinese)
[11]	张榛.电磁阀动态响应特性的有限元仿真与优化设计[J].空间控制技术与应用,2008,34(5):53-56Zhang Z.FEA simulation of dynamic response of solenoid valve and Its optimal design[J].Aerospace Control and Application,2008,34(5):53-56(in Chinese)