[1]
|
崔培枝,杨俊娥,朱胜.再制造过程中的清洗技术研究[J].中国表面工程,2006,19(5):123-125Cui P Z,Yang J E,Zhu S.Cleaning technology study in product remanufacturing process[J].China Surface Engineering Association,2006,19(5):123-125(in Chinese)
|
[2]
|
刘诗巍,陈铭.汽车产品再制造的清洗技术:原理与方法[J].机械设计与研究,2009,25(5):71-74Liu S W,Chen M.Cleaning technology of remanufacturing automobile products:principle and methods[J].Machine Design and Research,2009,25(5):71-74(in Chinese)
|
[3]
|
张云电,赵峰.滤芯超声清洗研制[J].中国机械工程,2005,16(20):1858-1862Zhang Y D,Zhao F.Development of the ultrasonic cleaning machine for the filter element[J].Chinese Mechanical Engineering,2005,16(20):1858-1862(in Chinese)
|
[4]
|
Bogdan Niemczewski.Influence of concentration of substances used in ultrasonic cleaning in alkaline solutions on cavitation intensity[J].Ultrasonics Sonochemistry,2009,(16):402-407
|
[5]
|
Li J X,Sanderso R D,Jacobs E P.Ultrasonic cleaning of nylon microfiltratio membranes fouled by Kraft paper mill effluent[J].Journal of Membrane Science,2002,(205):247-257
|
[6]
|
Mazue G,Viennet R,Hihn J Y,et al.Large-scale ultrasonic cleaning system:design of a multitransducer device for boat cleaning(20 kHz)[J].Ultrasonics Sonochemistry,2011,(18):895-900
|
[7]
|
杨继生,徐辉.超声波处理油泥砂脱油实验研究[J].石油学报,2010,26(2):300-304Yang J S,Xu H.Experimental research on crude oil removal from oily sludge and sands by ultrasound[J].Acta Petrolei Sinica,2010,26(2):300-304(in Chinese)
|
[8]
|
刘伟宏,王连吉,李兴林,等.碳氢溶剂在轴承行业中的应用[J].轴承,2010,(7):59-62Liu W H,Wang L J,Li X L,at al.Application of hydrocarbon solvent in bearing industry[J].Bearing,2010,(7):59-62(in Chinese)
|
[9]
|
张凌芳,贾继欣,等.环保型金属加工水基清洗剂的开发及性能研究[J].润滑与密封,2012,37(24):91-94Zhang L F,Jia J X,at al.Development and performance evaluation of environment-friendly water-based metal processing detergent[J].Lubrication Engineering,2012,37(24):91-94(in Chinese)
|