|
[1]
|
古成中,吴新跃.有限元网格划分及发展趋势[J].计算机科学与探索,2008,(3):248-259Gu C Z,Wu X Y.A review of FEM and trend of development[J].Journal of Frontiers of Computer Science&Technology,2008,(3):248-259(in Chinese)
|
|
[2]
|
蒋孝煜,高维山.有限元法在齿轮弯曲应力计算中的应用[R].清华大学科学报告,QH79013,1979Jiang X Y,Gao W S.The application of finite element method in calculating bending stress of gear[R].Science report of Tsinghua University,QH79013,1979(in Chinese)
|
|
[3]
|
王成.人字齿轮啮合特性与修形设计研究[D].西安:西北工业大学,2009Wang C.The research of meshing characteristic and modification of double helical gears[D].Xi'an:Northwestern Polytechnical University,2009(in Chinese)
|
|
[4]
|
方宗德,马均辉.斜齿轮轮齿有限元网格的自动生成与接触计算[J].机械科学与技术,1993,12(3):25-29Fang Z D,Ma J H.Auto-generation of 3-D finite element meshed and contact calculation of helical gear teeth[J].Mechanical Science and Technology for Aerospace Engineering,1993,12(3):25-29(in Chinese)
|
|
[5]
|
丁能根.斜齿轮三维有限元网格和接触单元的自动生成[J].合肥工业大学学报(自然科学版),2003,26(5):1094-1097Ding N G.Automatic generation of 3D finite element mesh and contact elements for helical gears[J].Journal of Hefei University of Technology(Natural Science),2003,26(5):1094-1097(in Chinese)
|
|
[6]
|
王丽萍,徐颖强,崔艳梅.基于高弯曲强度的齿轮过渡曲线分析[J].机械强度,2012,34(3):445-449Wang L P,Xu Y Q,Cui Y M.Transiton curve of gear based on high bending strength[J].Journal of Mechanical Strength,2012,34(3):445-449(in Chinese)
|
|
[7]
|
方宗德,李宏,沈允文.斜齿轮三维优化修形的实验[J].机械科学与技术,1992,11(4):72-75Fang Z D,Li H,Shen Y W.Experiment on 3-D modification of helical gears[J].Mechanical Science and Technology for Aerospace Engineering,1992,11(4):72-75(in Chinese)
|
|
[8]
|
赵宁,曾晓春,郭辉,等.斜齿面齿轮齿面仿真及其轮齿接触分析[J].航空动力学报,2008,23(10):1927-1932Zhao N,Zeng X C,Guo H,et al.Tooth contact analysis of face gear drive with helical pinion and simulation of the tooth face[J].Journal of Aerospace Power,2008,23(10):1927-1932(in Chinese)
|
点击查看大图
下载:
