基于关联关系图的复杂产品设计迭代控制方法及应用

俞琳; 张杰; 符磊; 李原

doi:10.13433/j.cnki.1003-8728.2014.1031

基于关联关系图的复杂产品设计迭代控制方法及应用

doi: 10.13433/j.cnki.1003-8728.2014.1031

1.
西北工业大学现代设计与集成制造技术教育部重点实验室西安 710072

详细信息

作者简介:
俞琳(1983-)，博士，研究方向为虚拟装配和装配规划，shuijingputaofish@163.com;李原(联系人)，教授，博士生导师，yuanli@nwpu.edu.cn

俞琳(1983-)，博士，研究方向为虚拟装配和装配规划，shuijingputaofish@163.com;李原(联系人)，教授，博士生导师，yuanli@nwpu.edu.cn

计量
- 文章访问数: 115
- HTML全文浏览量: 25
- PDF下载量: 3
- 被引次数: 0
出版历程
- 收稿日期: 2013-10-22

A Method of Process Analysis and Iterative Control Based on Association Network Graph

1.
Key Laboratory of Education Ministry of Contemporary Design and Integrated Manufacturing Technology, Northwest Polytechnic University, Xi'an 710072

摘要

摘要: 针对飞机产品设计过程中存在的多参数高度耦合问题,建立了产品设计关系网络图模型,给出了参数关联值的定义,提出了设计迭代控制方法,借助参数关联密度和关联深度,得出了最优设计路径的评价指标。并将该方法用于某飞机机翼的迭代设计过程中,获得了提高中央桁强度的最优设计迭代路径,极大地提高了设计效率。
- 关联设计 /
- 关联关系网络图模型 /
- 迭代策略 /
- 迭代控制
Abstract: Aiming at the problem caused by the highly coupled multi-parameters in aircraft design, firstly a networkgraph model of product design relationship is established, and the definition of the association values of parametersis studied; secondly, a method for design iteration control is proposed; and finally the evaluation objectives of themost optimal design path based on the density and depth of parameter association is obtained.This method has beenused in a design iteration process of an aircraft wing, and the obtained optimal design iteration path of the centralgirder strength indicated the high enhancement in the term of design efficiency.
- aircraft /
- associated design /
- association network graph /
- control

HTML全文

参考文献(8)

[1]	陈孟江，纪杨建，祁国宁.面向ETO 产品设计更改的参数网络建模及应用研究[J].制造业自动化，2009，32(2): 10-14Chen M J，Ji Y J，Qi G N.Parameter network modeling andapplication of design changes for ETO product [J].Manufacturing Automation，2009,32(2): 10-14 (in Chinese)
[2]	杨帆，唐晓青.基于特性关联的产品工程更改传播[J].北京航空航天大学学报,2012,38(7): 1-8Yang F，Tang X Q.Propagation of engineering changebased on characteristic linkage perspective[J].Journal ofBeijing University of Aeronautics and Astronautics，2012，38(7): 1-8 (in Chinese)
[3]	刘萍，冯桂莲.图的深度优先搜索遍历算法分析及其应用[J].青海师范大学,2007，(3): 41-44Liu P，Feng G L .Analysis and application for depth-firstsearch algorithm of graph[J].Journal of Qinghai NormalUniversity,2007，(3): 41-44 (in Chinese)
[4]	马竣，肖田元，范文慧.面向分区协同设计的关联关系信息模型[J].计算机集成制造系统，2009，15 (8):1484-1492Ma J，Xiao T Y，Fan W H .Information model of correlationfor district collaborative design[J].Computer IntegratedManufacturing Systems，2009，15 (8): 1484-1492 (in Chinesee)
[5]	王国贤，胡吉全.智能化的设计更改传播机制及其应用[J].中国制造业信息化,2008,37(15): 25-36Wang G X，Hu J Q.Intelligent design change propagationmechanism and application[J].Manufacturing InformationEngineering of China,2008,37(15): 25-36 (in Chinese)
[6]	陈亮，邓灵，高诚辉.多学科协同设计的约束网络模型研究[J].中国制造业信息化,2005，9(9): 98-104Chen L，Deng L，Gao C H.Research on the constraintnetwork model for multidisciplinary collaborative design[J].Manufacturing Information Engineering of China，2005，9(9): 98-104 (in Chinese)
[7]	Kim K，Manley D，Yang H.Ontology-based assembly designand information sharing for collaborative productdevelopment[J].Computer-Aided Design,2006,38: 1233-50
[8]	Shah J J，Rogers M T.Assembly modeling as an extension offeature-based design[J].Res Eng Des,1993，(5): 218-237