变位自转式双平面研磨方法仿真研究及加工实验

闫雯; 黄玉美; 高峰; 穆卫谊

doi:10.13433/j.cnki.1003-8728.2014.1012

变位自转式双平面研磨方法仿真研究及加工实验

doi: 10.13433/j.cnki.1003-8728.2014.1012

1.
西安理工大学机械与精密仪器工程学院教育部数控机床及机械制造装备集成重点实验室, 西安 710048

基金项目:

国家重点基础研究发展计划(973 计划)项目(2009CB724406)和国家自然基金项目(50875209)资助

详细信息

作者简介:
闫雯(1980-)，博士研究生，研究方向为研磨加工，工艺及数控加工，yanwen1980@gmail.com;黄玉美(联系人)，教授，huangym@xaut.edu.cn

闫雯(1980-)，博士研究生，研究方向为研磨加工，工艺及数控加工，yanwen1980@gmail.com;黄玉美(联系人)，教授，huangym@xaut.edu.cn

计量
- 文章访问数: 106
- HTML全文浏览量: 23
- PDF下载量: 3
- 被引次数: 0
出版历程
- 收稿日期: 2013-03-21

The Simulation and Machining Experiment of the Double-side Flat-lapping Method of Displacement-rotation

1.
Xi'an University of Technology, School of Mechanical Instrumental Engineering, Key Laboratory of NC Machine Tools and Manufacture Equipment Integrated of the Educational Ministry, Shaanxi, Xi'an 710048

摘要

摘要: 针对传统平面研磨方法中,工件中心研磨轨迹重复率高,研磨速度径向分布不均的缺点,基于固着磨料研磨技术提出一种变位自转式双平面研磨加工方法。工件在研具的运动中获得变化的研磨力,在隔离盘内实现变位自转的研磨运动形式。从研磨原理上改变了传统研磨加工中工件的运动模式,增加了工件的自由度,实现了工件在自转的同时其回转中心与研具中心存在时变的相对运动,即工件回转中心相对于研具的运动轨迹是具有时变性的曲线。不同的研磨运动形式从根本上克服了传统方法的缺点,并依此原理研制了新型数控研磨机床。通过对变位自转研磨加工轨迹曲线的仿真分析,证明了这种研磨方法有利于改善研磨相对速度分布均匀性、研磨轨迹时变性,获得更好的研磨加工质量,加工实验证明在相同加工参数下,该研磨方法相对于行星轮式的研磨方法获得了更低的表面粗糙度。
- 固着磨料 /
- 变位自转 /
- 研磨轨迹 /
- 速度分布
Abstract: Aiming at the questions of traditional flat-lapping method that high repetition rate of lapping trajectory onworkpiece center point, and velocity distribution inhomogeneous in radial, a double-side flat-lapping method ofdisplacement-rotation based on the solid abrasive lapping technology is proposed.Workpiece is driven by varietallapping force which comes from the movements of lapping tool.The motion pattern of workpiece is changed inprinciple, and the degrees of freedom in workpiece are increased.A random relative motion between workpiece andlap tool while the workpiece rotates is put into effect.The trajectory in the rotation center of both workpiece and laptool are time-variant curves.For the different lapping process, the new method overcomes the deficiencies in thecommon lapping method, and a new CNC lapping machine tool is developed on the basis of the present principle.The simulation analysis further verifies that the new method has the advantage in improving the uniformity of velocitydistribution, and the time variation in lapping trajectory.The compared experiment shows that the new lappingmethod reached lower surface roughness than that for the planet type lapping at the same processing conditions.
- computer simulation /
- degrees of freedom (mechanics) /
- experiments /
- lapping

HTML全文

参考文献(11)

[1]	Okumu O D，Boning D S，Chung J E，et al.Characterizationand modeling of oxide chemical-mechanical polishing usingplanarization length and pattern density concepts[J].IEEETransactions on Semiconductor Manufacturing，2002，15(2): 232-234
[2]	孙希威，张飞虎，董申，等.磁流变抛光去除模型及驻留时间算法研究[J].新技术新工艺,2006，(2): 73-75Sun X W，Zhang F H，Dong S，et al.Research onremove model and algorithm of resident time for magnetrheological finishing [J].New Technology & NewProcess,2006，(2): 73-75 (in Chinese)
[3]	Kasai T，Horio K，Karaki-DOY T.Improvement conventionalpolishing conditions for obtain super smooth surface ofcompound semiconductor wafers[J].Ann.CIRP，1990，39(1): 297-301
[4]	魏冰阳，邓效忠，杨建军，等.螺旋锥齿轮超声研磨加工的机理与实验研究[J].机械科学与技术，2006，25(12): 1506-1510Wei B Y，Deng X Z，Yang J J，et al.Experimentalstudy of ultrasonic lapping mechanism of spiral-beveland hypoid gears [J].Mechanical Science andTechnology for Aerospace Engineering，2006，25 (12):1506-1510 (in Chinese)
[5]	Yang J D，Tian C L，Wang C X.Nanometer lappingtechnology at high speed[J].Science in China Series E:Technological Sciences，2007,50(1): 27-38
[6]	施俊侠，颜柏桦，张迎卫.行星式平面研磨机床的运动方式及其轨迹和运动参数的研究[J].机床与液压，2004，(3): 109-110Shi J X，Yan B H，Zhang Y W.Study of the motionlocus and parameters of planetary surface grinder[J].Machine Tool & Hydraulics，2004，(3): 109-110 (in Chinese)
[7]	魏勇亮，金圭.ADAMS 仿真时发生接触穿透的原因及对策[J].机械工程师,2005，(9): 53-54Wei Y L，Jin G.The cause and countermeasure of thecontacts penetration in simulation with ADAMS [J].Mechanical Engineer,2005，(9): 53-54 (in Chinese)
[8]	石明全.基于ADAMS 的多接触问题研究[J].计算机工程与应用,2004，(29): 220-222Shi M Q.Study on multi-contacts with ADAMS[J].Computer Engineering and Applications，2004，(29):220-222 (in Chinese)
[9]	王黎明，张心明，范景峰.固着磨料研磨轨迹研究[J].长春光学精密机械学院学报,1997,20(3): 15-19Wang L M，Zhang X M，Fan J F.Discussing on solidabrasive lapping path[J].J.Changchu Ninst.Opt.&Fine Mech.1997，20(3): 15-19 (in Chinese)
[10]	吴宏基，曹利新，刘健.基于行星式平面研磨机研抛过程的运动几何学分析[J].机械工程学报，2002，38(6): 144-147Wu H J，Cao L X，Liu J.Analysis o f kinematic geometryon face grinding process on lapping machines[J].ChineseJournal of Mechanical Engineering，2002，38(6): 144-147(in Chinese)
[11]	郑文.摇摆式圆盘研磨机研磨轨迹型态的研究[J].重型机械科技,2005，(2): 1-3Zheng W.The research for the trail type of pendular discMuller[J].Heavy Machinery Science and Technology，2005，(2): 1-3 (in Chinese)1504