[1]
|
LIAO D, ZHU S P, KESHTEGAR B, et al. Probabilistic framework for fatigue life assessment of notched components under size effects[J]. International Journal of Mechanical Sciences, 2020, 181: 105685. doi: 10.1016/j.ijmecsci.2020.105685
|
[2]
|
ADU-GYAMFI S, REN X D, LARSON E A, et al. The effects of laser shock peening scanning patterns on residual stress distribution and fatigue life of AA2024 aluminium alloy[J]. Optics & Laser Technology, 2018, 108: 177-185.
|
[3]
|
MALEKI E, UNAL O, KASHYZADEH K R. Efficiency analysis of shot peening parameters on variations of hardness, grain size and residual stress via Taguchi approach[J]. Metals and Materials International, 2019, 25(6): 1436-1447. doi: 10.1007/s12540-019-00290-7
|
[4]
|
MALEKI E, UNAL O, GUAGLIANO M, et al. Analysing the fatigue behaviour and residual stress relaxation of gradient Nano-structured 316L steel subjected to the shot peening via deep learning approach[J]. Metals and Materials International, 2022, 28(1): 112-131. doi: 10.1007/s12540-021-00995-8
|
[5]
|
李克, 朱文龙, 宋逸思, 等. 复合喷丸对0Cr16Ni5Mo1马氏体不锈钢表面组织和性能的影响[J]. 理化检验-物理分册, 2021, 57(12): 32-37.LI K, ZHU W L, SONG Y S, et al. Effects of composite shot peening on surface microstructure and properties of 0Cr16Ni5Mo1 martensitic stainless steel[J]. PhysicalTesting and Chemical Analysis Part A: Physical Testing, 2021, 57(12): 32-37. (in Chinese)
|
[6]
|
陈李学, 蒋建军, 李伟刚, 等. 切削工艺对7075铝合金喷丸效果的影响[J]. 材料保护, 2021, 54(11): 104-107. doi: 10.3969/j.issn.1001-1560.2021.11.clbh202111018CHEN L X, JIANG J J, LI W G, et al. Effect of cutting process on shot peening of 7075 aluminum alloy[J]. Materials Protection, 2021, 54(11): 104-107. (in Chinese) doi: 10.3969/j.issn.1001-1560.2021.11.clbh202111018
|
[7]
|
蔡晋, 谢广安, 闫雪, 等. TC4钛合金超声喷丸强化覆盖率试验与数值分析[J]. 航空制造技术, 2021, 64(19): 30-36. doi: 10.16080/j.issn1671-833x.2021.19.030CAI J, XIE G A, YAN X, et al. Experimental and numerical analysis of coverage of TC4 titanium alloy by ultrasonic shot peening[J]. Aeronautical Manufacturing Technology, 2021, 64(19): 30-36. (in Chinese) doi: 10.16080/j.issn1671-833x.2021.19.030
|
[8]
|
SOYAMA H, CHIGHIZOLA C R, HILL M R. Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel[J]. Journal of Materials Processing Technology, 2021, 288: 116877. doi: 10.1016/j.jmatprotec.2020.116877
|
[9]
|
WU J Z, WEI P T, LIU H J, et al. Effect of shot peening intensity on surface integrity of 18CrNiMo7-6 steel[J]. Surface and Coatings Technology, 2021, 421: 127194. doi: 10.1016/j.surfcoat.2021.127194
|
[10]
|
MARTÍN V, VÁZQUEZ J, NAVARRO C, et al. Effect of shot peening residual stresses and surface roughness on fretting fatigue strength of Al 7075-T651[J]. Tribology International, 2020, 142: 106004. doi: 10.1016/j.triboint.2019.106004
|
[11]
|
LIU X, LIU J X, ZUO Z X, et al. Numerical study on residual stress redistribution of shot-peened aluminum 7075-T6 under fretting loading[J]. International Journalof Mechanical Sciences, 2019, 160: 156-164. doi: 10.1016/j.ijmecsci.2019.06.031
|
[12]
|
MALI R A, AGRAHARI M D, GUPTA T V K. FE based simulation and experimental validation of forces in dry turning of aluminium 7075[J]. Materials Today:Proceedings, 2020, 27: 2319-2323. doi: 10.1016/j.matpr.2019.09.120
|
[13]
|
XIE L C, ZHANG J, XIONG C B, et al. Investigation on experiments and numerical modelling of the residual stress distribution in deformed surface layer of Ti-6Al-4V after shot peening[J]. Materials & Design, 2012, 41: 314-318.
|