[1]
|
PINTO A L, ARAÚJO J A, TALEMI R. Effects of fretting wear process on fatigue crack propagation and life assessment[J]. Tribology International, 2021, 156: 106787. doi: 10.1016/j.triboint.2020.106787
|
[2]
|
XU L, YU X, LI H, et al. Fatigue life prediction of aviation aluminium alloy based on quantitative pre-corrosion damage analysis[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(6): 1353-1362. doi: 10.1016/S1003-6326(17)60156-0
|
[3]
|
常琦, 杨维希, 赵恒, 等. 基于多传感器的裂纹扩展监测研究[J]. 航空学报, 2020, 41(2): 223336.CHANG Q, YANG W X, ZHAO H, et al. A multi-sensor based crack propagation monitoring research[J]. Acta Aeronautica et Astronautica Sinica, 2020, 41(2): 223336. (in Chinese)
|
[4]
|
DRAGAN K, DZIENDZIKOWSKI M, KURNYTA A, et al. An on-line multiway approach to in-situ NDI looking at the PZL-130TCII[J]. Fatigue of Aircraft Structures, 2014, 2013(5): 5-11. doi: 10.2478/fas-2013-0001
|
[5]
|
BARSKI M, STAWIARSKI A. The crack detection and evaluation by elastic wave propagation in open hole structures for aerospace application[J]. Aerospace Science and Technology, 2018, 81: 141-156. doi: 10.1016/j.ast.2018.07.045
|
[6]
|
QING X L, LI W Z, WANG Y S, et al. Piezoelectric transducer-based structural health monitoring for aircraft applications[J]. Sensors, 2019, 19(3): 545. doi: 10.3390/s19030545
|
[7]
|
DZIENDZIKOWSKI M, DRAGAN K, KURNYTA A, et al. Health monitoring of the aircraft structure during a full scale fatigue test with use of an active piezoelectric sensor network[J]. Solid State Phenomena, 2015, 220-221: 328-332. doi: 10.4028/www.scientific.net/SSP.220-221.328
|
[8]
|
SU Z Q, CHAO Z, MING H, et al. Acousto-ultrasonics-based fatigue damage characterization: linear versus nonlinear signal features[J]. Mechanical Systems and Signal Processing, 2014, 45(1): 225-239. doi: 10.1016/j.ymssp.2013.10.017
|
[9]
|
张正罡, 刘丹, 他得安. 多通道超声兰姆波检测板状结构中的裂纹[J]. 应用声学, 2015, 34(3): 189-194.ZHANG Z G, LIU D, TA D A. Detection of crack in plate structure using multi-channel ultrasonic Lamb waves[J]. Journal of Applied Acoustics, 2015, 34(3): 189-194. (in Chinese)
|
[10]
|
ZHOU J Y, XIAO L, QU W Z, et al. Nonlinear Lamb wave based DORT method for detection of fatigue cracks[J]. NDT & E International, 2017, 92: 22-29.
|
[11]
|
杨伟博, 袁慎芳, 邱雷. 基于Lamb波的平尾大轴裂纹扩展监测[J]. 振动、测试与诊断, 2018, 38(1): 143-147. doi: 10.16450/j.cnki.issn.1004-6801.2018.01.022YANG W B, YUAN S F, QIU L. Crack Growth monitoring of horizontal stabilizer shaft based on Lamb wave[J]. Journal of Vibration, Measurement & Diagnosis, 2018, 38(1): 143-147. (in Chinese) doi: 10.16450/j.cnki.issn.1004-6801.2018.01.022
|
[12]
|
WANG D J, HE J J, GUAN X F, et al. A model assessment method for predicting structural fatigue life using Lamb waves[J]. Ultrasonics, 2018, 84: 319-328. doi: 10.1016/j.ultras.2017.11.017
|
[13]
|
汤剑飞, 严刚, 蔡晨宁. 温度影响下基于应力波的钛合金试件疲劳裂纹监测实验研究[J]. 实验力学, 2015, 30(1): 23-30. doi: 10.7520/1001-4888-14-064TANG J F, YAN G, CAI C N. Experimental study of temperature effect on fatigue crack monitoring for titanium alloy specimen based on stress wave[J]. Journal of Experimental Mechanics, 2015, 30(1): 23-30. (in Chinese) doi: 10.7520/1001-4888-14-064
|
[14]
|
YELVE N P, TSE P W, MASURKAR F. Theoretical and experimental evaluation of material nonlinearity in metal plates using Lamb waves[J]. Structural Control and Health Monitoring, 2018, 25(6): e2164. doi: 10.1002/stc.2164
|
[15]
|
CANTERO-CHINCHILLA S, ARANGUREN G, ROYO J M, et al. Structural health monitoring using ultrasonic guided-waves and the degree of health index[J]. Sensors, 2021, 21(3): 993. doi: 10.3390/s21030993
|
[16]
|
蒋泽军. 模糊数学理论与方法[M]. 北京: 电子工业出版社, 2015JIANG Z J. Theory and method of fuzzy mathematics[M]. Beijing: Publishing House of Electronics Industry, 2015. (in Chinese)
|
[17]
|
ZHOU C, SU Z Q, CHENG L. Probability-based diagnostic imaging using hybrid features extracted from ultrasonic Lamb wave signals[J]. Smart Materials and Structures, 2011, 20(12): 125005. doi: 10.1088/0964-1726/20/12/125005
|
[18]
|
王强, 胥静, 王梦欣, 等. 结构裂纹损伤的Lamb波层析成像监测与评估研究[J]. 机械工程学报, 2016, 52(6): 30-36. doi: 10.3901/JME.2016.06.030WANG Q, XU J, WANG M X, et al. Lamb wave tomography technique for crack damage detection[J]. Journal of Mechanical Engineering, 2016, 52(6): 30-36. (in Chinese) doi: 10.3901/JME.2016.06.030
|
[19]
|
ZHOU C, SU Z Q, CHENG L. Quantitative evaluation of orientation-specific damage using elastic waves and probability-based diagnostic imaging[J]. Mechanical Systems and Signal Processing, 2011, 25(6): 2135-2156. doi: 10.1016/j.ymssp.2011.02.001
|
[20]
|
MOTAMED P K, ABEDIAN A, NASIRI M. Optimal sensors layout design based on reference-free damage localization with lamb wave propagation[J]. Structural Control and Health Monitoring, 2020, 27(4): e2490.
|