Research on Dynamic Magneto-thermal Coupling Mechanism of Loading Device for Water-lubricated Bearing
-
摘要: 针对水润滑轴承动态试验研究中电磁加载装置发热以及电磁力不稳定等现象,为了给轴承研究提供准确载荷,对电磁加载装置动态下的磁热耦合机理进行研究。首先建立了电磁加载装置能量损耗数学模型,对能量损耗进行理论分析;其次,构建了电磁加载装置物理模型,进行磁热耦合仿真分析,得到了磁感应强度、铜损耗以及铁损耗的变化规律;最后,进行电磁加载装置能量损耗试验。研究结果表明:动态下电磁力不稳定的主要原因是加载装置存在能量损耗,且以铜损耗与铁损耗为主;能量损耗与轴转速、加载装置激励电流以及初始温度有关,在激励电流1 ~ 3 A、转速0 ~ 1800 r/min以及温度22 ~ 50 ℃工况下,电磁力试验值与仿真值最大误差为4.7%。Abstract: In view of the phenomena such as the heating of electromagnetic loading device and the instability of electromagnetic force in dynamic test of water-lubricated bearings, the magneto-thermal coupling mechanism of loading device was studied in order to provide the accurate load for bearing performance research. Firstly, the mathematical model of energy loss for electromagnetic loading device was established, and the energy loss was analyzed theoretically. Secondly, the physical model of electromagnetic loading device was constructed, the magneto-thermal coupling simulation analysis was carried out, and the variation rules of magnetic induction intensity, copper loss and iron loss were obtained. Finally, the energy loss test of electromagnetic loading device was carried out. The results show that the main reason of unstable electromagnetic force under dynamic conditions is the energy loss of loading device, and the main energy loss are copper loss and iron loss. Energy loss is related to the shaft speed, the excitation current of electromagnetic loading device and the initial temperature. Under the working condition of excitation current (1 - 3 A), the rotating speed (0 - 1 800 r/min) and the temperature (22 - 50 ℃), the maximum error of electromagnetic force between the test and the simulation results is 4.7%.
-
表 1 加载装置热材料
参数 加载盘 线圈 电磁铁 密度 7.65 kg/dm3 8900 kg/m3 7.759 g/cm3 热导率 42.5 W/(m·K) 397 W/(m·K) 1046.7 W/(m·K) 比热容 502.4 J/(kg·C) 504 J/(kg·C) 460 J/(kg·C) -
[1] SHINDE A B, CHAVAN S P. Parametric investigation of surface texturing on performance characteristics of water lubricated journal bearing using FSI approach[J]. SN Applied Sciences, 2020, 2(1): 36 doi: 10.1007/s42452-019-1809-1 [2] WODTKE M, LITWIN W. Water-lubricated stern tube bearing-experimental and theoretical investigations of thermal effects[J]. Tribology International, 2021, 153: 106608 doi: 10.1016/j.triboint.2020.106608 [3] 段一戬, 钟志贤, 蔡忠侯, 等. 径向电磁悬浮系统的Magnet/Simulink联合仿真[J]. 桂林理工大学学报, 2021, 41(4): 903-907 doi: 10.3969/j.issn.1674-9057.2021.04.026DUAN Y J, ZHONG Z X, CAI Z H, et al. Co-simulation of Magnet/Simulink for radial electromagnetic levitation system[J]. Journal of Guilin University of Technology, 2021, 41(4): 903-907 (in Chinese) doi: 10.3969/j.issn.1674-9057.2021.04.026 [4] GIAP V N, HUANG S C. Effectiveness of fuzzy sliding mode control boundary layer based on uncertainty and disturbance compensator on suspension active magnetic bearing system[J]. Measurement and Control, 2020, 53(5-6): 934-942 doi: 10.1177/0020294020905044 [5] 邱荣华, 刘宏昭. 高速电主轴非接触电磁加载装置设计与实现[J]. 中国机械工程, 2014, 25(8): 1027-1032 doi: 10.3969/j.issn.1004-132X.2014.08.007QIU R H, LIU H Z. Design and implementation of high speed motorized spindle's non-contact electromagnetic loading system[J]. China Mechanical Engineering, 2014, 25(8): 1027-1032 (in Chinese) doi: 10.3969/j.issn.1004-132X.2014.08.007 [6] 岳彩培, 蒋科坚, 周元. 电磁轴承实现振动姿态解耦的转子不平衡抑制[J]. 浙江理工大学学报(自然科学版), 2018, 39(2): 182-188YUE C P, JIANG K J, ZHOU Y. Unbalance suppression by vibration attitude decoupling in active magnetic bearing-rotor systems[J]. Journal of Zhejiang Sci-Tech University (Natural Sciences Edition), 2018, 39(2): 182-188 (in Chinese) [7] 袁哲, 王楠, 王鹏, 等. 水润滑轴承非接触式电磁加载装置研究[J]. 中国测试, 2020, 46(6): 95-100 doi: 10.11857/j.issn.1674-5124.2020030042YUAN Z, WANG N, WANG P, et al. Research on non-contact electromagnetic loading device for water-lubricated bearing[J]. China Measurement & Test, 2020, 46(6): 95-100 (in Chinese) doi: 10.11857/j.issn.1674-5124.2020030042 [8] 王楠, 梁应选, 王鹏, 等. 一种用于水润滑轴承试验的组合式电磁加载装置: 中国, 207976283U[P]. 2018-10-16WANG N, LIANG Y X, WANG P, et al. The utility model relates to a combined electromagnetic loading device for water-lubricated bearing test: CN, 207976283U[P]. 2018-10-16 (in Chinese) [9] 任正义, 李乃安. 大支承力径向电磁轴承结构设计及试验研究[J]. 轴承, 2018(4): 39-44 doi: 10.19533/j.issn1000-3762.2018.04.012REN Z Y, LI N A. Structural design and experimental study of radial electromagnetic bearings with large supporting force[J]. Bearing, 2018(4): 39-44 (in Chinese) doi: 10.19533/j.issn1000-3762.2018.04.012 [10] 胡小飞, 刘刚, 孙津济, 等. Homopolar型径向磁轴承转子涡流损耗的分析与优化[J]. 系统仿真学报, 2013, 25(12): 2961-2966 + 2972HU X F, LIU G, SUN J J, et al. Analysis and optimization of rotor eddy current loss in Homopolar radial magnetic bearings[J]. Journal of System Simulation, 2013, 25(12): 2961-2966 + 2972 (in Chinese) [11] 师蔚, 滕鸿达. 基于耦合场的永磁电机损耗及温升分析[J]. 微电机, 2020, 53(8): 33-39 doi: 10.3969/j.issn.1001-6848.2020.08.007SHI W, TENG H D. Analysis of permanent magnet motor loss and temperature rise based on coupling field[J]. Micromotors, 2020, 53(8): 33-39 (in Chinese) doi: 10.3969/j.issn.1001-6848.2020.08.007 [12] 戈宝军, 魏瑶, 韩继超, 等. 开关磁阻电机定子铁损分布的时步有限元分析[J]. 电机与控制学报, 2020, 24(7): 20-28GE B J, WEI Y, HAN J C, et al. Time-finite element analysis of stator iron loss distribution in switched reluctance motors[J]. Electric Machines and Control, 2020, 24(7): 20-28 (in Chinese) [13] 丁国平, 周祖德, 胡业发. 磁力轴承旋转电磁场的有限元计算及分析[J]. 武汉理工大学学报, 2012, 34(1): 114-117 doi: 10.3963/j.issn.1671-4431.2012.01.025DING G P, ZHOU Z D, HU Y F. Calculation and analysis of magnetic bearings rotating magnetic field with finite element method[J]. Journal of Wuhan University of Technology, 2012, 34(1): 114-117 (in Chinese) doi: 10.3963/j.issn.1671-4431.2012.01.025 [14] NEVARANTA N, JAATINEN P, VUOJOLAINEN J, et al. Adaptive MIMO pole placement control for commissioning of a rotor system with active magnetic bearings[J]. Mechatronics, 2020, 65: 102313 doi: 10.1016/j.mechatronics.2019.102313 [15] BERTOTTI G. General properties of power losses in soft ferromagnetic materials[J]. IEEE Transactions on Magnetics, 1988, 24(1): 621-630 doi: 10.1109/20.43994