[1]
|
RAJA V, KOKKOLARAS M, ISAKSSON O. A simulation-assisted complexity metric for design optimization of integrated architecture aero-engine structures[J]. Structural and Multidisciplinary Optimization, 2019, 60(1): 287-300 doi: 10.1007/s00158-019-02308-5
|
[2]
|
李华, 陈果, 林桐, 等. 航空发动机叶片损伤自动测量方法研究[J]. 航空计算技术, 2015, 45(1): 52-55 doi: 10.3969/j.issn.1671-654X.2015.01.013LI H, CHEN G, LIN T, et al. Study on automatic measurement method for damage aero engine lamina[J]. Aeronautical Computing Technique, 2015, 45(1): 52-55 (in Chinese) doi: 10.3969/j.issn.1671-654X.2015.01.013
|
[3]
|
王立闯, 马成元, 何庚波. 无损检测技术在航空发动机维修保障过程中的应用[J]. 中国科技纵横, 2015(21): 60 doi: 10.3969/j.issn.1671-2064.2015.21.044WANG L C, MA C Y, HE G B. Application of nondestructive testing technology in aero-engine maintenance support[J]. China Science and Technology Review, 2015(21): 60 (in Chinese) doi: 10.3969/j.issn.1671-2064.2015.21.044
|
[4]
|
THAKER A M, MUTHUSAMY V R, SEDARAT A, et al. Duodenoscope reprocessing practice patterns in U. S. endoscopy centers: a survey study[J]. Gastrointestinal Endoscopy, 2018, 88(2): 316-322 doi: 10.1016/j.gie.2018.04.2340
|
[5]
|
ALATORRE D, NASSER B, RABANI A, et al. Robotic boreblending: The future of In-Situ gas turbine repair[C]// IEEE/RSJ International Conference on Intelligent Robots and Systems, Madrid: IEEE, 2018: 1401-1407
|
[6]
|
GORISSEN B, DE VOLDER M, REYNAERTS D. Chip-on-tip endoscope incorporating a soft robotic pneumatic bending microactuator[J]. Biomedical Microdevices, 2018, 20(3): 73 doi: 10.1007/s10544-018-0317-1
|
[7]
|
COBOS-GUZMAN S, PALMER D, AXINTE D. Kinematic model to control the end-effector of a continuum robot for multi-axis processing[J]. Robotica, 2017, 35(1): 224-240 doi: 10.1017/S0263574715000946
|
[8]
|
ZHOU S, ZHANG W P, ZOU Y, et al. Piezoelectric-driven miniature wheeled robot based on flexible transmission mechanisms[J]. Microsystem Technologies, 2018, 24(2): 943-950 doi: 10.1007/s00542-017-3424-7
|
[9]
|
OUYANG B, LIU Y H, Sun D. Design of a three-segment continuum robot for minimally invasive surgery[J]. Robotics and Biomimetics, 2016, 3(1): 2 doi: 10.1186/s40638-016-0035-1
|
[10]
|
李扬, 朱倩, 徐志伟. SMA驱动变体机翼后缘精确控制研究[J]. 机械科学与技术, 2013, 32(7): 1001-1005LI Y, ZHU Q, XU Z W. Research on the precise control of the morphing wing trailing edge actuated by SMA[J]. Mechanical Science and Technology for Aerospace Engineering, 2013, 32(7): 1001-1005 (in Chinese)
|
[11]
|
KKCIUK M, KUCHCIK W, PILCH Z, et al. A novel SMA drive based on the Graham Clock escapement and resistance feedback[J]. Sensors and Actuators A: Physical, 2019, 285: 406-413 doi: 10.1016/j.sna.2018.11.044
|
[12]
|
TOMORI H, HIYOSHI K, KIMURA S, et al. A self-deformation robot design incorporating bending-type pneumatic artificial muscles[J]. Technologies, 2019, 7(3): 51 doi: 10.3390/technologies7030051
|
[13]
|
DONG X, RAFFLES M, COBOS-GUZMAN S, et al. A novel continuum robot using twin-pivot compliant joints: design, modeling, and validation[J]. Journal of Mechanisms and Robotics, 2016, 8(2): 021010 doi: 10.1115/1.4031340
|
[14]
|
DONG X, AXINTE D, PALMER D, et al. Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines[J]. Robotics and Computer-Integrated Manufacturing, 2017, 44: 218-229 doi: 10.1016/j.rcim.2016.09.004
|
[15]
|
王伟, 邵红亮. 不同直径NiTi形状记忆合金棒材的超弹性试验研究[J]. 结构工程师, 2014, 30(3): 168-174 doi: 10.3969/j.issn.1005-0159.2014.03.026WANG W, SHAO H L. Experimental investigation on mechanical properties of shape memory alloy bars in different sizes[J]. Structural Engineer, 2014, 30(3): 168-174 (in Chinese) doi: 10.3969/j.issn.1005-0159.2014.03.026
|