[1]
|
刘忠海, 单以银, 王毓麟, 等.新型耐磨铲齿的开发与应用[J].铸造技术, 1999, (3):3-6 doi: 10.3969/j.issn.1000-8365.1999.03.001Liu Z H, Shan Y Y, Wang Y L, et al. Development and application of new-style wear-resistant dipper tooth[J]. Foundry Technology, 1999, (3):3-6(in Chinese) doi: 10.3969/j.issn.1000-8365.1999.03.001
|
[2]
|
畅西原, 于浩令.电铲铲齿的失效及材质选择[J].铸造技术, 2010, 31(8):1098-1100 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zzjs201008038Chang X Y, Yu H L. Failure and material selection of shovel teeth[J]. Foundry Technology, 2010, 31(8):1098-1100(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zzjs201008038
|
[3]
|
Singla S, Kang A S, Grewal J S, et al. Wear behavior of weld overlays on excavator bucket teeth[J]. Procedia Materials Science, 2014, 5:256-266 doi: 10.1016/j.mspro.2014.07.265
|
[4]
|
陶勇.挖掘机铲齿材料选择及磨损研究[J].铸造技术, 2017, 38(4):802-804 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zzjs201704015Tao Y. Research on excavator tooth material selection and wear mechanism[J]. Foundry Technology, 2017, 38(4):802-804(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zzjs201704015
|
[5]
|
江利丰, 杨启, 张广伟, 等.大型挖掘机铲齿的结构优化及制造工艺研究[J].铸造技术, 2016, 37(7):1514-1516 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zzjs201607058Jiang L F, Yang Q, Zhang G W, et al. Investigation on optimum structure and process of excavator bucket tooth[J]. Foundry Technology, 2016, 37(7):1514-1516(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zzjs201607058
|
[6]
|
张延强.WK-75型矿用挖掘机斗齿的磨损分析及结构改进[D].太原: 太原理工大学, 2016 http://cdmd.cnki.com.cn/Article/CDMD-10112-1016714669.htmZhang Y Q. Wear analysis and structure improvement on bucket tooth of WK-75 mining excavator[D]. Taiyuan: Taiyuan University of Technology, 2016(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10112-1016714669.htm
|
[7]
|
殷淑芳, 尹开勤.基于SolidWorks的挖掘机铲斗分析与优化设计[J].机械研究与应用, 2016, 29(2):141-143, 147 http://d.old.wanfangdata.com.cn/Periodical/jxyjyyy201602048Yin S F, Yin K Q. Analysis and optimum design of excavator bucket based on SolidWorks[J]. Mechanical Research & Application, 2016, 29(2):141-143, 147(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jxyjyyy201602048
|
[8]
|
王伟.多功能摩擦磨损试验机的设计研究[D].南京: 南京林业大学, 2016 http://cdmd.cnki.com.cn/Article/CDMD-10298-1017800109.htmWang W. Design and study of multifunctional friction and wear testing machine[D]. Nanjing: Nanjing Forestry University, 2016(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10298-1017800109.htm
|
[9]
|
谢军, 吴宏章, 陈大林, 等.高速摩擦磨损试验机的研制[J].润滑与密封, 2008, 33(5):97-99 doi: 10.3969/j.issn.0254-0150.2008.05.025Xie J, Wu H Z, Chen D L, et al. Development of the high-speed friction and wear testing machine[J]. Lubrication Engineering, 2008, 33(5):97-99(in Chinese) doi: 10.3969/j.issn.0254-0150.2008.05.025
|
[10]
|
赵丽娟, 朱会东, 邵欣, 等.磨蚀实验台及其数据处理系统的设计[J].现代制造工程, 2009, (12):68-71 doi: 10.3969/j.issn.1671-3133.2009.12.018Zhao L J, Zhu H D, Shao X, et al. Design of abrasion tester and its data processing system[J]. Modern Manufacturing Engineering, 2009, (12):68-71(in Chinese) doi: 10.3969/j.issn.1671-3133.2009.12.018
|
[11]
|
Tiruvenkadam N, Thyla P R, Kumar M S, et al. Development of multipurpose reciprocating wear tester under various environmental parameters[C]//2013 International Conference on Energy Efficient Technologies for Sustainability. IEEE, 2013: 213-216
|
[12]
|
王剑, 耿玉旭, 程志涛, 等.多功能摩擦传动实验机研制与实验研究[J].机械科学与技术, 2016, 35(11):1738-1744 doi: 10.13433/j.cnki.1003-8728.2016.1117Wang J, Geng Y X, Cheng Z T, et al. A multifunctional tribology and transmission machine and experimental investigation[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(11):1738-1744(in Chinese) doi: 10.13433/j.cnki.1003-8728.2016.1117
|
[13]
|
韩中领, 汪家道, 陈大融, 等.一种多功能摩擦实验台的设计及实验[J].机械科学与技术, 2007, 26(10):1245-1248 doi: 10.3321/j.issn:1003-8728.2007.10.003Han Z L, Wang J D, Chen D R, et al. Design of a multifunctional friction-test instrument and its experiment[J]. Mechanical Science and Technology for Aerospace Engineering, 2007, 26(10):1245-1248(in Chinese) doi: 10.3321/j.issn:1003-8728.2007.10.003
|
[14]
|
易玮帆, 侯曦, 赵敬安, 等.高速卷绕机锭轴夹头动态特性测试方法研究[J].机械科学与技术, 2015, 34(7):1059-1062 doi: 10.13433/j.cnki.1003-8728.2015.0717Yi W F, Hou X, Zhao J A, et al. Research on dynamic testing method of high-speed winder spindle[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(7):1059-1062(in Chinese) doi: 10.13433/j.cnki.1003-8728.2015.0717
|
[15]
|
牛浩之, 吴行阳, 叶帅.基于位置信息采集往复式摩擦试验机摩擦力的研究[J].计量与测试技术, 2016, 43(4):18-19, 22 http://d.old.wanfangdata.com.cn/Periodical/jlycsjs201604008Niu H Z, Wu X Y, Ye S. Research of gathering force of friction of reciprocating friction testing machine based on location information[J]. Metrology & Measurement Technique, 2016, 43(4):18-19, 22(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jlycsjs201604008
|