[1]
|
Blunier B, Cirrincione G, Hervé Y, et al. A new analytical and dynamical model of a scroll compressor with experimental validation[J]. International Journal of Refrigeration, 2009, 32(5):874-891 doi: 10.1016/j.ijrefrig.2008.11.009
|
[2]
|
Winandy E L, Lebrun J. Scroll compressors using gas and liquid injection:experimental analysis and modelling[J]. International Journal of Refrigeration, 2002, 25(8):1143-1156 doi: 10.1016/S0140-7007(02)00003-8
|
[3]
|
龚文瑾, 马一太, 赵丽.CO2滚动活塞膨胀机的模拟与分析[J].工程热物理学报, 2010, 31(8):1265-1269 http://d.old.wanfangdata.com.cn/Conference/7169045Gong W J, Ma Y T, Zhao L. Simulation and analysis on CO2 rolling piston expander[J]. Journal of Engineering Thermophysics, 2010, 31(8):1265-1269(in Chinese) http://d.old.wanfangdata.com.cn/Conference/7169045
|
[4]
|
马一太, 张美兰, 田华, 等.CO2双缸滚动活塞膨胀机Fluent模拟与分析[J].天津大学学报, 2011, 44(12):1093-1099 doi: 10.3969/j.issn.0493-2137.2011.12.010Ma Y T, Zhang M L, Tian H, et al. Fluent simulation and analysis of CO2 two-cylinder rolling piston expander[J]. Journal of Tianjin University, 2011, 44(12):1093-1099(in Chinese) doi: 10.3969/j.issn.0493-2137.2011.12.010
|
[5]
|
Geng W, Liu C H, Wang Y Z. The performance optimization of rolling piston compressors based on CFD simulation[C]//Proceedings of the 17th International Compressor Engineering Conference at Purdue. West Lafayette, IN: ICEC, 2004: 7
|
[6]
|
李超, 夏威, 任燕玲, 等.低压腔涡旋压缩机吸油管特性的数值研究[J].流体机械, 2014, 42(10):16-20 doi: 10.3969/j.issn.1005-0329.2014.10.004Li C, Xia W, Ren Y L, et al. Numerical study on the characteristic of the oil suction pipe for a low-pressure shell scroll compressor[J]. Fluid Machinery, 2014, 42(10):16-20(in Chinese) doi: 10.3969/j.issn.1005-0329.2014.10.004
|
[7]
|
吴开波, 李海生, 陈英华, 等.涡旋压缩机齿端面密封条的力载荷分布规律的研究[J].流体机械, 2014, 42(11):38-42, 12 doi: 10.3969/j.issn.1005-0329.2014.11.008Wu K B, Li H S, Chen Y H, et al. Study on load distribution of the scroll compressor teeth seal[J]. Fluid Machinery, 2014, 42(11):38-42, 12(in Chinese) doi: 10.3969/j.issn.1005-0329.2014.11.008
|
[8]
|
王君, 张娜, 刘凯, 等.基于流场模拟的涡旋压缩机涡齿应力变形分析[J].工程热物理学报, 2012, 33(8):1334-1337Wang J, Zhang N, Liu K, et al. Stress and deformation analysis on wraps in scroll compressor based on flow field simulation[J]. Journal of Engineering Thermophysics, 2012, 33(8):1334-1337(in Chinese)
|
[9]
|
王君, 查海滨, 张晓慧, 等.一种渐变啮合间隙的变壁厚涡旋齿型线研究[J].工程热物理学报, 2013, 34(8):1453-1456 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gcrwlxb201308013Wang J, Zha H B, Zhang X H, et al. Investigation of tapered meshing clearance and thickness scroll wrap[J]. Journal of Engineering Thermophysics, 2013, 34(8):1453-1456(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gcrwlxb201308013
|
[10]
|
王君, 张晓慧, 刘凯, 等.新型涡旋式多相泵气液增压过程研究与设计理论[J].机械工程学报, 2012, 48(2):172-178 http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201202028Wang J, Zhang X H, Liu K, et al. Investigation of compression process and design theories in novel scroll multiphase pump[J]. Journal of Mechanical Engineering, 2012, 48(2):172-178(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201202028
|
[11]
|
Kovacevic A, Stosic N, Smith I K. Numerical simulation of fluid flow and solid structure in screw compressors[C]//Proceedings of 2002 ASME International Mechanical Engineering Congress and Exposition. New Orleans: ASME, 2002: 409-416
|
[12]
|
Kovacevic A. Boundary adaptation in grid generation for CFD analysis of screw compressors[J]] International Journal for Numerical Methods in Engineering, 2005, 64(6):401-426 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.1002/nme.1376
|
[13]
|
刘国平, 张国琳, 李宇锋, 等.基于三棱柱动网格的涡旋压缩机三维流场模拟[J].机械设计与制造, 2016(6):22-25 doi: 10.3969/j.issn.1001-3997.2016.06.007Liu G P, Zhang G L, Li Y F, et al. Three-dimensional numerical simulation for transient flow in a scroll compressor based on triangular prism and dynamic mesh[J]. Machinery Design & Manufacture, 2016(6):22-25(in Chinese) doi: 10.3969/j.issn.1001-3997.2016.06.007
|
[14]
|
肖根福, 刘国平, 王俊亭, 等.动网格在涡旋压缩机三维流场数值模拟中的应用[J].流体机械, 2014, 42(1):25-29 doi: 10.3969/j.issn.1005-0329.2014.01.006Xiao G F, Liu G P, Wang J T, et al. Three-dimensional numerical simulation for transient flow in a scroll compressor using dynamic mesh technique[J]. Fluid Machinery, 2014, 42(1):25-29(in Chinese) doi: 10.3969/j.issn.1005-0329.2014.01.006
|
[15]
|
王福军.计算流体动力学分析——CFD软件原理与应用[M].北京:清华大学出版社, 2004Wang F J. Computational fluid dynamics analysis principle and application of CFD software[M]. Beijing:Tsinghua University Press, 2004(in Chinese)
|