复杂装备智能设计软件构建方法及实践

杨璧绮; 任如飞

doi:10.13433/j.cnki.1003-8728.20180165

复杂装备智能设计软件构建方法及实践

doi: 10.13433/j.cnki.1003-8728.20180165

杨璧绮¹,
任如飞^2, ,

1.
西北工业大学计算机学院, 西安 710072;
2.
西安智设信息科技有限公司, 西安 710079

基金项目:

大学生创新创业训练计划项目（201710699159）与中央高校基本科研基金项目（3102017GX06005）资助

详细信息

通讯作者:
任如飞,高级工程师,硕士,rufeiren@163.com

计量
- 文章访问数: 468
- HTML全文浏览量: 39
- PDF下载量: 102
- 被引次数: 0
出版历程
- 收稿日期: 2017-12-07
- 刊出日期: 2018-10-05

Design Method and Application of Intelligent Design Software for Complex Equipment

Yang Biqi¹,
Ren Rufei^{2
, ,}

1.
School of Computing, Northwestern Polytechnical University, Xi'an 710072, China;
2.
Xi'an Intelligence Design Information Technology Co. Ltd, Xi'an 710079, China

摘要

摘要: 复杂装备的研发涉及到复杂的流程、庞杂的数据和多学科零散的分析求解方法，其设计又是一个多轮次迭代寻优的极富创造性过程，需要大量借鉴专家知识体系、设计经验和资源数据。针对上述问题和需求，以智能设计基本理论和关键技术为基础，以基于模型的复杂装备智能设计问题软件化和应用效益为目标，提出了一种基于智能设计思想的复杂装备数字化设计方案和实现方式，并基于航空行业的案例进行了实用化阐述，设计分析质量得到了大幅提升。
- 复杂装备 /
- 智能设计 /
- 设计软件
Abstract: Development of complex equipment include complex process, huge-and-complex data and multidisciplinary scattered analysis method. The design of the complex equipment is a creative process of a multi cycle iterative optimization, in which requires a lot of reference expert knowledge system, design experience and data resources. Aiming at the above-mentioned problems and requirement, based on the theory and key technology of intelligent design, a digital design plan and implementation method of complex equipment was proposed in order to meet the construction of software for the intelligent design of complex equipment. In the end, the practical description for the cases of aviation industry were made. The quality of the design and analysis has been greatly improved.
- complex equipment /
- intelligent design /
- design software

HTML全文

参考文献(14)

[1]	Negri E, Fumagalli L, Macchi M. A review of the roles of digital twin in CPS-based production systems[J]. Procedia Manufacturing, 2017,11:939-948
[2]	Glaessgen E H, Stargel D S. The digital twin paradigm for future NASA and U.S. air force vehicles[C]//Proceedings of the 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Honolulu, Hawaii:AAIA, 2012:23-26
[3]	Tuegel E J, Ingraffea A R, Eason T G, et al. Reengineering aircraft structural life prediction using a digital twin[J]. International Journal of Aerospace Engineering, 2011,2011:154798
[4]	雷英杰,邢清华,王涛.人工智能(AI)程序设计(面向对象语言)[M].北京:清华大学出版社,2005:3 Lei Y J, Xing Q H, Wang T. Program design of artificial intelligence(AI)[M]. Beijing:Tsinghua University Press, 2005:3
[5]	Grieves M, Vickers J. Digital twin:mitigating unpredictable, undesirable emergent behavior in complex systems[M]//Kahlen F J, Flumerfelt S, Alves A. Transdisciplinary Perspectives on Complex Systems. Cham:Springer, 2017:85-113
[6]	Grieves M. Digital twin:manufacturing excellence through virtual factory replication[R]. Florida:Florida Institute of Technology, 2014
[7]	Schroeder G N, Steinmetz C, Pereira C E, et al. Digital twin data modeling with automationml and a communication methodology for data exchange[J]. IFAC-PapersOnLine, 2016,49(30):12-17
[8]	NASA. NASA technology roadmaps TA 12:materials, structures, mechanical systems, and manufacturing[R]. NASA, 2015:25-30
[9]	王成恩,于宏,张闻雷,等.面向对象的航空发动机装配模型[J].计算机集成制造系统,2010,16(5):942-948 Wang C E, Yu H, Zhang W L, et al. Object-oriented aero-engine assembly models[J]. Computer Integrated Manufacturing Systems, 2010,16(5):942-948(in Chinese)
[10]	杜平安,于德江,岳萍.虚拟样机技术的技术与方法体系研究[J].系统仿真学报,2007,19(15):3447-3451 Du P A, Yu D J, Yue P. Research on technology and methodology architecture of virtual prototyping technology[J]. Journal of System Simulation, 2007,19(15):3447-3451(in Chinese)
[11]	李联辉,莫蓉,常智勇,等.面向全寿命周期技术状态管理的航空发动机AMRO支持系统[J].计算机集成制造系统,2013,19(12):3087-3098 Li L H, Mo R, Chang Z Y, et al. Aero-engine AMRO support system for whole lifecycle configuration management[J]. Computer Integrated Manufacturing Systems, 2013,19(12):3087-3098(in Chinese)
[12]	范凯,余思佳,吴志赞,等.数字样机在核工业设备全生命周期的应用研究[J].机械设计与制造,2016,(7):260-264 Fan K, Yu S J, Wu Z Z, et al. Application research of digital mockups in product lifecycle of nuclear industry equipments[J]. Machinery Design & Manufacture, 2016,(7):260-264(in Chinese)
[13]	Kraft E M. The air force digital thread/digital twin-life cycle integration and use of computational and experimental knowledge[C]//Proceedings of the 54th AIAA Aerospace Sciences Meeting. San Diego, California, USA:AIAA, 2016:1
[14]	Tao F, Cheng J F, Qi Q L, et al. Digital twin-driven product design, manufacturing and service with big data[J]. The International Journal of Advanced Manufacturing Technology, 2018,94(9-12):3563-3576