刮板输送机载荷谱模拟新方法及模拟系统开发

毛君; 谢春雪; 刘治翔; 谢苗

doi:10.13433/j.cnki.1003-8728.2017.1006

刮板输送机载荷谱模拟新方法及模拟系统开发

doi: 10.13433/j.cnki.1003-8728.2017.1006

1.
辽宁工程技术大学机械工程学院, 辽宁阜新 123000

基金项目:

国家自然科学基金项目（51774162）、国家高技术研究发展计划（863计划）项目（2013AA06A412）及辽宁省教育厅创新团队项目（LT2013009）资助

详细信息

作者简介:
毛君(1960-),教授,博士生导师,研究方向为机械系统动力学及智能控制,13704181080@139.com

计量
- 文章访问数: 159
- HTML全文浏览量: 26
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2016-08-02
- 刊出日期: 2017-10-05

A New Method for Simulating Load Spectrum of Scraper Conveyor and Developing its Simulation System

1.
College of Mechanical Engineering, Liaoning Technical University, Liaoning Fuxin 123000, China

摘要

摘要: 为了解决常规刮板输送机载荷谱计算方法的计算过程复杂，规律性差，不易于实现和推广到任意时刻、任意位置等问题，借助计算机的数值方法，研究一种计算刮板输送机载荷谱的新型数学模型。该方法使用一维数组模拟刮板输送机，通过数组中各个元素的数值变化模拟刮板输送机对应位置货载量随采煤机位置的变化而变化。使用matlab软件对刮板输送机载荷谱模拟系统软件平台进行开发，避免了繁琐的数据输入过程。通过计算机模拟，将本文研究方法与常规方法进行对比，验证本文研究方法可行性和优势。使用此方法能够极大简化刮板输送机载荷谱的计算过程，可获得任意时刻、任意位置刮板输送机的货载分布，对研究刮板输送机动态特性、张力变化与实时调节等提供了运行阻力数据依据。
- 刮板输送机 /
- 采煤机 /
- 载荷谱 /
- 计算机模拟 /
- 数学模型 /
- 数值方法
Abstract: In order to overcome the complex process, poor regularity, difficulty in implementation in any time and any place to calculate the load spectrum of a conventional scraper conveyor, we establish a new mathematical model for calculating the load spectrum of a scraper conveyor with the help of computer numerical method. The model uses a one-dimensional array to simulate the scraper conveyor through numerically simulating the changes of each element in the array that correspond to the changes in the load of the scraper conveyor with the coal mining machine position change. The MATLAB software is used to develop the software platform of the scraper conveyor's load spectrum simulation system to avoid the tedious data input process. Through computer simulation, this paper compares the method with the conventional method, and the simulation results verify its feasibility and advantage. This method can greatly simplify the calculation process of the load spectrum of the scraper conveyor and can obtain cargo distribution at any time and position of the scraper conveyor. The method provides the database for the running resistance of the dynamic characteristics of the scraper conveyor, the tension variation and the real time adjustment.
- scraper conveyor /
- coal mining machine /
- load spectrum /
- computer simulation /
- mathematical model /
- numerical method

HTML全文

参考文献(16)

[1]	Wauge D H. Modelling of an armoured face conveyor[D]. Queensland:The University of Queensland, 2003:18-23
[2]	Nuttall A J G, Lodewijks G. Dynamics of multiple drive belt conveyor systems[J]. Particle & Particle Systems Characterization, 2007,24(4-5):365-369
[3]	Piatkowski T. Analysis of translational positioning of unit loads by directionally-oriented friction force fields[J]. Mechanism and Machine Theory, 2011,46(2):201-217
[4]	Dolipski M, Remiorz E, Sobota P. Determination of dynamic loads of sprocket drum teeth and seats by means of a mathematical model of the longwall conveyor[J]. Archives of Mining Sciences, 2012,57(4):1101-1119
[5]	何柏岩,孙阳辉,聂锐,等.矿用刮板输送机圆环链传动系统动力学行为研究[J].机械工程学报,2012,48(17):50-56 He B Y, Sun Y H, Nie R, et al. Dynamic behavior analysis on the ring chain transmission system of an armoured face conveyor[J]. Journal of Mechanical Engineering, 2012,48(17):50-56(in Chinese)
[6]	宋伟刚,柳洪义,王鹰.带式输送机动力学及其计算机仿真的研究[J].机械工程学报,2003,39(9):133-138 Song W G, Liu H Y, Wang Y. Research on dynamic and computer simulasion of the belt conveyor[J]. Journal of Mechanical Engineering, 2003,39(9):133-138(in Chinese)
[7]	毛君,李贵轩.刮板输送机动力学行为分析与控制理论研究[M].沈阳:辽宁大学出版社,2006:65-70 Mao J, Li G X. Dynamic behavior analysis and control theory research of scraper conveyor[M]. Shenyang:Liaoning University Publishing House, 2006:65-70(in Chinese)
[8]	郭荣.刮板输送机自动张紧液压系统研究[D].西安:西安科技大学,2014 Guo R. The research of the scraper conveyor's automatic chain tension hydraulic system[D]. Xi'an:Xi'an University of Science and Technology, 2014(in Chinese)
[9]	王凯.基于刮板输送机负载预测的采煤机调速技术研究[D].江苏徐州:中国矿业大学,2015 Wang K. Research on shearer speed control technology based on scraper conveyor load prediction[D]. Jiangsu Xuzhou:China University of Mining and Technology, 2015(in Chinese)
[10]	焦宏章,杨兆建,王淑平.刮板输送机链轮传动系统接触动力学仿真分析[J].煤炭学报,2012,37(S2):494-498 Jiao H Z, Yang Z J, Wang S P. Contact dynamics simulation analysis for sprocket transmission system of scraper conveyor[J]. Journal of China Coal Society, 2012,37(S2):494-498(in Chinese)
[11]	毛君,师建国,张东升,等.重型刮板输送机动力建模与仿真[J].煤炭学报,2008,33(1):103-106 Mao J, Shi J G, Zhang D S, et al. Dynamic modeling and simulation of heavy scraper conveyor[J]. Journal of China Coal Society, 2008,33(1):103-106(in Chinese)
[12]	谢苗,毛君,许文馨.重型刮板输送机故障载荷工况与结构载荷工况的动力学仿真研究[J].中国机械工程,2012,23(10):1200-1204 Xie M, Mao J, Xu W X. Dynamics simulation of heavy scraper conveyor in working condition of failure-load and structural load[J]. China Mechanical Engineering, 2012,23(10):1200-1204(in Chinese)
[13]	张强,付云飞,聂国强.动载荷下的V锁式接链环力学特性研究[J].机械设计,2013,30(11):13-16 Zhang Q Fu Y F, Nie G Q. Study of mechanical properties of V-lock chain ring under dynamic load[J]. Journal of Machine Design, 2013,30(11):13-16(in Chinese)
[14]	焦宏章,杨兆建,王学文,等.刮板输送机链轮瞬态动力学响应分析[J].太原理工大学学报,2013,44(1):51-54 Jiao H Z, Yang Z J, Wang X W, et al. Transient dynamic responses analysis of sprocket for scraper conveyer[J]. Journal of Taiyuan University of Technology, 2013,44(1):51-54(in Chinese)
[15]	郝勇,于鸿斐,刘征,等.刮板输送机中部槽力学计算与分析[J].煤炭科学技术,2014,42(11):67-72 Hao Y, Yu H F, Liu Z, et al. Mechanics calculation and analysis on middle pan of scraper conveyor[J]. Coal Science and Technology, 2014,42(11):67-72(in Chinese)
[16]	王腾,夏护国.重型刮板输送机驱动方式比较分析[J].煤炭科学技术,2013,41(9):154-158,162 Wang T, Xia H G. Comparison and analysis of drive modes used to heavy duty scraper conveyor[J]. Coal Science and Technology, 2013,41(9):154-158,162(in Chinese)