五轴加工奇异问题机理分析及其避免策略

蔡安江; 赵丹; 叶向东; 王杰

doi:10.13433/j.cnki.1003-8728.2017.0815

五轴加工奇异问题机理分析及其避免策略

doi: 10.13433/j.cnki.1003-8728.2017.0815

1.
西安建筑科技大学机电工程学院, 西安 710055

基金项目:

国家自然科学基金项目（51475352）资助

详细信息

作者简介:
蔡安江(1965-),教授,博士生导师,研究方向为多轴数控加工技术,cai_aj@163.com

计量
- 文章访问数: 236
- HTML全文浏览量: 20
- PDF下载量: 16
- 被引次数: 0
出版历程
- 收稿日期: 2016-06-12
- 刊出日期: 2017-08-05

Mechanism Analysis and Avoiding Strategy of Singular Problem in Five-axis Machining

1.
College of Electrical and Mechanical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China

摘要

摘要: 五轴加工后置处理在奇异区域内反解旋转角时，产生的旋转轴运动突变，不仅会引起较大的加工非线性误差，而且会损害工件与机床部件。针对以上问题，以五轴AB双转台卧式数控机床为研究对象，根据机床结构与运动链，运用齐次坐标变换原理，推导出其后置处理算法，将刀轴矢量的可行值域简化为球体，并通过将AB轴的运动类似为球体上的AB阶跃，分析了奇异问题的产生机理，提出了加工奇异区域的检测方法。对刀轴矢量投影局部放大后，通过刀位点和刀轴矢量插值分解B阶跃后重新生成刀具路径的方法，得到了奇异问题的避免策略。仿真加工验证表明，该方法可以在原有刀位轨迹不变的基础上较好地消除奇异问题，提高加工质量，同时也可推广到同类结构相似的机床上用于消除奇异问题。
- 五轴加工 /
- 奇异问题 /
- 运动突变 /
- 检测方法 /
- 避免策略
Abstract: In five-axis machining, the drastic motion of rotation generated in post processing for inverse solving rotating angle in the singular area will cause large non-linear machining errors and induce damages to the workpiece and machine tool as well. To solve this problem, the paper taking five-axis table-tiliting horizontal type machine tool with two rotational axes AB as studying object, the post processing algorithm was deduced based on the structure and kinematic chain of the machine tool and homogeneous coordinate transformation theory. The feasible value range of cutter axis vector is simplified as a sphere. The corresponding detection method was obtained after analyzing the generation mechanism of the singular problem with an analogy of AB axis motion to the AB step on the sphere. The avoiding strategy for the singular problem is obtained with the method of CL point and tool axis vector interpolation for disintegrating B step and tool path regeneration after projecting by local zooming the tool axis vector. The experiment results show that the present method can effectively eliminate the singularity problem without any changing of the original cutter locus and improve the processing quality. At the same time, it can be extended to the similar structure of machine tool for eliminating singular problem.
- 5-axis machining /
- singular problem /
- drastic motion /
- detection method /
- avoiding strategy

HTML全文

参考文献(15)

[1]	Uddin M S, Ibaraki S, Matsubara A, et al. Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors[J]. Precision Engineering, 2009,33(2):194-201
[2]	罗明,吴宝海,李山,等.自由曲面五轴加工刀轴矢量的运动学优化方法[J].机械工程学报,2009,45(9):158-163 Luo M, Wu B H, Li S, et al. Five-axis tool orientation optimization based on kinematical method[J]. Journal of Mechanical Engineering, 2009,45(9):158-163(in Chinese)
[3]	Chen L P, Chen Y, Hu D J. Interference-free tool posture generation for 5-axis NC milling free-form surfaces with cylindrical mill[J]. Chinese Journal of Mechanical Engineering, 2004,17(3):381-384
[4]	Wang N, Tang K. Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath[J]. Computer-Aided Design, 2007,39(10):841-852
[5]	So B S, Park D H, Cho Y, et al. An analytic model for tool trajectory error in 5-axis machining[J]. Journal Achievements in Materials and Manufacturing Engineering, 2008,31(2):570-575
[6]	Affouard A, Duc E, Lartigue C, et al. Avoiding 5-axis singularities using tool path deformation[J]. International Journal of Machine Tools and Manufacture, 2004,44(4):415-425
[7]	Munlin M, Makhanov S S, Bohez E L J. Optimization of rotations of a five-axis milling machine near stationary points[J]. Computer-Aided Design, 2004,36(12):1117-1128
[8]	Makhanov S S, Munlin M. Optimal sequencing of rotation angles for five-axis machining[J]. The International Journal of Advanced Manufacturing Technology, 2007,35(1-2):41-54
[9]	Ivanenko S A, Makhanov S S, Munlin M A. New numerical algorithms to optimize cutting operations of a five-axis milling machine[J]. Applied Numerical Mathematics, 2004,49(3-4):395-413
[10]	Sorby K. Inverse kinematics of five-axis machines near singular configurations[J]. International Journal of Machine Tools and&anufacture, 2007,47(2):299-306
[11]	王峰,林浒,郑飂默,等.五轴加工奇异区域的检测和处理[J].计算机集成制造系统,2011,17(7):1435-1440 Wang F, Lin H, Zheng L M, et al. Detection and treatment of singular area in five-axis machining[J]. Computer Integrated Manufacturing Systems, 2011,17(7):1435-1440(in Chinese)
[12]	王峰,林浒,刘峰,等.五轴加工奇异区域内的刀具路径优化[J].机械工程学报,2011,47(19):174-180 Wang F, Lin H, Liu F, et al. Tool path optimization of five-axis machining in singular area[J]. Journal of Mechanical Engineering, 2011,47(19):174-180(in Chinese)
[13]	王峰,林浒,郑飂默,等.基于误差控制的五轴NC系统平滑插补策略[J].小型微型计算机系统,2013,34(4):810-814 Wang F, Lin H, Zheng L M, et al. Strategy for smooth Interpolation Based on error control in five-axis NC system[J]. Journal of Chinese Computer Systems, 2013,34(4):810-814(in Chinese)
[14]	张宏韬,杨建国,姜辉,等.双转台五轴数控机床误差实时补偿时[J].机械工程学报,2010,46(21):143-148 Zhang H T, Yang J G, Jiang H, et al. Real-time error compensation for the two turntable five-axis NC machine tools[J]. Journal of Mechanical Engineering, 2010,46(21):143-148(in Chinese)
[15]	Lin Z W, Fu J Z, Sheng H Y, et al. Non-singular tool path planning by translating tool orientations in C-space[J]. The International Journal of Advanced Manufacturing Technology, 2014,71(9-12):1835-1848