Dynamics Simulation of Wear in Revolute Clearance Joints of Multibody Systems
-
摘要: 为了准确预测旋转铰磨损趋势,并能够准确的将其结果应用于磨损动力学仿真与计算,基于含间隙曲柄滑块机构的动力学模型,考虑接触过程中销轴和孔的接触面曲率半径变化趋势,建立了一种依据接触宽度变化计算的曲率半径外推法磨损仿真模型,并利用计算结果,对机构的磨损动力学变化趋势进行了仿真研究,得到销轴在系统不同载荷下的受力分布规律、磨损规律以及动力学特征,找到了系统功能退化的规律。Abstract: In order to predict the trend of joint wear, and the result was applied to the wear can accurately make the dynamics simulation and calculation, based on the dynamic model for slider-crank mechanism with clearance, considering the contact journal and bear interface curvature radius in the process of change trend, a basis for calculating the radius of curvature of contact width change extrapolation wear simulation model is established, and with the calculated results, the wear dynamics change of mechanism is simulated, the stress distribution and the wear rules and dynamic characteristics of pin shaft under different load are gotten, the laws of the function of system degradation is found.
-
Key words:
- clearance joint /
- joint wear /
- curvature extrapolation /
- slider-crank /
- wear dynamics
-
[1] 时兵,金烨.面向虚拟样机的机构间隙旋转铰建模与动力学仿真[J].机械工程学报,2009,45(4):299-303 Shi B, Jin Y. Dynamic simulation and modeling of revolute clearance joint for virtual prototyping[J]. Journal of Mechanical Engineering, 2009,45(4):299-303(in Chinese) [2] Flores P, Ambrósio J, Claro H C P, et al. A study on dynamics of mechanical systems including joints with clearance and lubrication[J]. Mechanism and Machine Theory, 2006,41(3):247-261 [3] Flores P. Modeling and simulation of wear in revolute clearance joints in multibody systems[J]. Mechanism and Machine Theory, 2009,44(6):1211-1222 [4] 江亲瑜,李宝良,易风.基于数值仿真技术求解铰链机构磨损概率寿命[J].机械工程学报,2007,43(1):196-201 Jiang Q Y, Li B L, Yi F. Probabilistic wear lifetime of hinge configurations resolved on numerical simulation[J]. Chinese Journal of Mechanical Engineering, 2007,43(1):196-201(in Chinese) [5] Pōdra P, Andersson S. Wear simulation with the Winkler surface model[J]. Wear, 1997,207(1-2):79-85 [6] Pōdra P, Andersson S. Finite element analysis wear simulation of a conical spinning contact considering surface topography[J]. Wear, 1999,224(1):13-21 [7] 宿月文,陈渭,郭彩霞.应用Winkler弹性基础模型的间隙铰接副磨损预测[J].摩擦学学报,2012,32(4):320-324 Su Y W, Chen W, Guo C X. Wear prediction of clearance revolute joints using winkler surface model[J]. Tribology, 2012,32(4):320-324(in Chinese) [8] 赵阳,潘冬,白争锋,等.含间隙卫星天线双轴机构动态磨损特性研究[J].机械设计与制造,2011,(5):107-109 Zhao Y, Pan D, Bai Z F, et al. Dynamic wear characteristics analysis for two-axis-position mechanism of satellite antennas with joint clearance[J]. Machinery Design &&anufacture, 2011,(5):107-109(in Chinese) [9] Kim N H, Won D, Burris D, et al. Finite element analysis and experiments of metal/metal wear in oscillatory contacts[J]. Wear, 2005,258(11-12):1787-1793 [10] Páczelt I, Mróz Z. Solution of wear problems for monotonic and periodic sliding with p-version of finite element method[J]. Computer Methods in Applied Mechanics and Engineering, 2012,249-252:75-103 [11] Flodin A, Andersson S. Simulation of mild wear in spur gears[J]. Wear, 1997,207(1-2):16-23 [12] Mukras S, Kim N H, Mauntler N A, et al. Analysis of planar multibody systems with revolute joint wear[J]. Wear, 2010,268(5-6):643-652 [13] 李聪聪,曾攀,雷丽萍,等.钴基合金的滑动磨损行为及仿真预测[J].机械工程学报,2011,44(21):97-103 Li C C, Zeng P, Lei L P, et al. Research on sliding wear behavior of co-based alloy and its simulation prediction[J]. Journal of Mechanical Engineering, 2011,47(21):97-103(in Chinese) [14] 温诗铸. 摩擦学原理[M]. 4版.北京:清华大学出版社,2012:10 Wen S Z. Principles of tribology[M]. 4th ed. Beijing:Tsinghua University Press, 2012:10(in Chinese) [15] 彼得森M B,怀纳W O.磨损控制手册[M].汪一麟,译.北京:机械工业出版社,1994:16-23 Peterson M B, Winer W O. Wear control handbook[M]. Wang Y L, trans. Beijing:China Machine Press, 1994:16-23(in Chinese)
点击查看大图
计量
- 文章访问数: 140
- HTML全文浏览量: 29
- PDF下载量: 6
- 被引次数: 0