错齿BTA钻头刀体扭转强度模拟分析与实验研究

杨翔; 郑建明; 李旭波; 郭便

doi:10.13433/j.cnki.1003-8728.2017.0311

错齿BTA钻头刀体扭转强度模拟分析与实验研究

doi: 10.13433/j.cnki.1003-8728.2017.0311

1.
西安理工大学机械与精密仪器工程学院, 西安 710048

基金项目:

国家科技重大专项（2013ZX04009011）资助

详细信息

作者简介:
杨翔(1990-),硕士研究生,研究方向为深孔刀具系统研究,super3d@yeah.net

通讯作者:
郑建明(联系人),教授,博士生导师,zjm@xaut.edu.cn

计量
- 文章访问数: 191
- HTML全文浏览量: 26
- PDF下载量: 6
- 被引次数: 0
出版历程
- 收稿日期: 2015-09-06
- 刊出日期: 2017-03-05

Simulation and Experimental Study on Torsion Strength of Staggered BTA Drill Body

1.
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China

摘要

摘要: 错齿BTA钻头刀体结构复杂，在钻削过程中既要承受较大的钻削力，又要具有足够大的排屑空间，解决刀体强度与排屑能力之间的矛盾是实现错齿BTA钻头优化设计的关键。采用有限元模拟分析与实验相结合的方法，对核电管板加工用错齿BTA钻头在扭转载荷作用下刀体强度及其应力应变分布特征进行了研究。结果表明：现有的错齿BTA钻头刀体在外齿根部与刀体中心两个排屑通道之间的横筋处为薄弱环节，存在较为严重的应力集中现象，扭矩实验中裂纹的产生部位与有限元模拟分析结果一致。通过采用形状优化及拓扑结构优化的方法对刀体薄弱环节进行优化改进，实现了刀体强度与排屑能力的综合优化，提高了错齿BTA钻头管板深孔加工效率。
- 错齿BTA钻头 /
- 有限元分析 /
- 扭矩实验 /
- 拓扑优化 /
- 形状优化
Abstract: In the light of complexity of BTA drill cutter body structure, processing of drilling not only need to be subjected to massive cutting load, it also demands sufficiently large space for chip removal, so the key to resolve the conflicts between strength and chip removal capacity is to achieve optimization design of BTA drill. Finite element analysis and experiments are applied to study the cutter body strength and stress-strain distribution of the BTA drill, which is for the tube sheets of nuclear power plants under torsion load. And the results show that the root of external insert and transverse reinforcement between the two chip of center cutter body and removal channels, which have a severe stress concentration issue, are its weakness to the existing BTA drill, and torque generated in the experiment parts and simulation results are consistent with each other. So the present results provide the basis for improving design for BTA drill. By optimizing the weak links of the cutter body with shape optimization and topology optimization, cutter body strength and chip removal capacity are optimized, processing efficiency of BTA drill on tube sheets of nuclear power plants are enhanced.
- BTA drill /
- finite element analysis /
- torque experiment /
- topology optimization /
- shape optimization

HTML全文

参考文献(15)

[1]	Chin J H, Hsieh C T, Lee L W. The shaft behavior of BTA deep hole drilling tool[J]. International Journal of Mechanical Sciences, 1996,38(5):461-482
[2]	Li H F, Qian C F, Yuan Q B. Cracking simulation of a tubesheet under different loadings[J]. Theoretical and Applied Fracture Mechanics, 2010,54(1):27-36
[3]	Liu C Y, Yan C Q, Wang J J. Optimal design of vertical natural circulation steam generator[J]. Nuclear Engineering and Design, 2012,258:167-178
[4]	韩君,李国骥.蒸汽发生器的研制[J].压力容器,2014,31(10):42-46 Han J, Li G J, Manufacture of steam generator[J]. Pressure Vessel Technology, 2014,31(10):42-46(in Chinese)
[5]	Katsuki A, Onikura H, Sajima T, et al. Development of a deep-hole boring tool guided by laser[J]. CIRP Annals-Manufacturing Technology, 1992,41(1):83-87
[6]	Katsuki A, Onikura H, Sajimi T, et al. Development of a high-performance deep-hole laser-guided boring tool:guiding characteristics[J]. CIRP Annals-Manufacturing Technology, 1997,46(1):319-323
[7]	Kim D W, Lee Y S, Park M S, et al. Tool life improvement by peck drilling and thrust force monitoring during deep-micro-hole drilling of steel[J]. International Journal of Machine Tools and Manufacture, 2009,49(3-4):246-255
[8]	Heinemann R, Hinduja S, Barrow G, et al. The performance of small diameter twist drills in deep-hole drilling[J]. Journal of Manufacturing Science and Engineering, 2006,128(4):884-892
[9]	Biermann D, Kersting M, N. Kessler. Process adapted structure optimization of deep hole drilling tools[J]. CIRP Annals-Manufacturing Technology, 2009,58(1):89-92
[10]	Liu Y G, Li F P, Xu X, et al. Simulation technology in failure analysis of drill pipe[J]. Procedia Engineering, 2011,12:236-241
[11]	赵洪兵,朱林.钛合金深孔钻削刀具的试验研究[J].中国机械工程,2006,17(6):591-595 Zhao H B, Zhu L. Experimental study on the performance of titanium alloy deep-hole driller[J]. China Mechanical Engineering, 2006,17(6):591-595(in Chinese)
[12]	Heinemann R, Hinduja S. A new strategy for tool condition monitoring of small diameter twist drills in deep-hole drilling[J]. International Journal of Machine Tools and Manufacture, 2012,52(1):69-76
[13]	师毓华,郑建明,侯晓莉,等. BTA深孔钻削切屑变形与刀齿切削力分布规律仿真[J].宇航材料工艺,2014,(5):36-40 Shi Y H, Zheng J M, Hou X Y, et al. Simulation on chip deformation and cutting force distribution laws of cutting tooth for staggered teeth BTA drill[J]. Aerospace Materials & Technology, 2014,(5):36-40(in Chinese)
[14]	Richardson R, Bhatti R. A review of research into the role of guide pads in BTA deep-hole machining[J]. Journal of Materials Processing Technology, 2001,110(1):61-69.
[15]	Weinert K, Webber O, Peters C. On the influence of drilling depth dependent modal damping on chatter vibration in BTA deep hole drilling[J]. CIRP Annals-Manufacturing Technology, 2005,54(1):363-366