Research on Intelligent Design System of the Fuze Mechanism
-
摘要: 针对目前引信机构设计经验及知识的重用率和继承度较低的问题,在引信机构设计过程中引入基于知识工程的专家系统、仿真流程化、参数化等技术方法,实现引信机构的智能设计,能够在一定程度上提升产品设计质量,缩短设计周期,降低研发成本。引信机构智能设计系统采用多种知识表示方式,通过基于规则和案例的混合推理方法从知识库中检索符合设计要求的案例,利用系统的仿真子系统和模型库子系统实现方案的有限元分析和参数化设计。通过系统测试表明,该智能设计系统能够实现对知识和经验的重用,可行有效。Abstract: To solve the problems of low inheritance and reuse rate of the design experience and knowledge of the Fuze mechanism, the expert system technology based on knowledge engineering, the simulation process and parametric technique are introduced in the design process of fuze mechanism, to improve the quality of product, shorten the design cycle and reduce the cost. The intelligent design system of the fuze mechanism uses different methods of knowledge representation to meets the design requirements of the case from the knowledge base through the mixed reasoning method of cases and rules. The finite element analysis and parametric design are realized by using the simulation module and model base module of the system. The test of the system shows that the intelligent design system can achieve the reuse of knowledge and experience effectively.
-
Key words:
- fuze mechanism /
- intelligent design /
- based reasoning /
- knowledge base
-
[1] 张合,李豪杰.引信机构学[M].北京:北京理工大学出版社,2007 Zhang H, Li H J. Fuze mechanism[M]. Beijing:Beijing institute of Technology Press, 2007(in Chinese) [2] 袁志华,郭美芳,郝博.榴弹总体方案智能设计专家系统技术[J].兵工学报,2006,27(1):170-174 Yuan Z H, Guo M F, Hao B. Study on high-explosive projectile expert system design[J]. Acta Armamentarii, 2006,27(1):170-174(in Chinese) [3] 姚智勇.引信机构虚拟样机设计专家系统研究[D].南京:南京理工大学,2012 Yao Z Y. Study on expert system of Fuze virtual prototype[D]. Nanjing:Nanjing University of Science & Technology, 2012(in Chinese) [4] 王家宁.基于知识工程的引信用MEMS机构智能设计系统研究[D].南京:南京理工大学,2014 Wang J N. Study on intelligent design of MEMS used in Fuze based on knowledge engineering[D]. Nanjing:Nanjing University of Science & Technology, 2014(in Chinese) [5] 李云云.浅析B/S和C/S体系结构[J].科学之友,2011,(01):6-8 Li Y Y. Discussion on the architecture of B/S and C/S[J]. Friend of Science Amateurs, 2011,(1):6-8(in Chinese) [6] 徐元浩,殷国富,许德帮,等.基于CBR的机床导轨智能设计研究[J].西南大学学报(自然科学版),2014,36(12):177-186 Xu Y H, Yin G F, Xu D B, et al. Research on intelligent design of machine tool rails based on CBR[J]. Journal of Southwest University (Natural Science Edition), 2014,36(12):177-186(in Chinese) [7] 蔡自兴,约翰·德尔金,龚涛.高级专家系统:原理、设计及应用[M].北京:科学出版社,2005 Cai Z X, Durkin J, Gong T. Advanced expert system:principle, design and application[M]. Beijing:Science Press, 2005(in Chinese) [8] 沈琴,李原,杨海成,等.基于神经网络和框架推理的风险应对专家系统[J].计算机工程,2008,34(15):170-172 Shen Q, Li Y, Yang H C, et al. Risk response expert system based on neural network and framework reasoning[J]. Computer Engineering, 2008,34(15):170-172(in Chinese) [9] 侯玉梅,许成媛.基于案例推理法研究综述[J].燕山大学学报(哲学社会科学版),2012,12(4):102-108 Hou Y M, Xu C Y. Survey on case based reasoning[J]. Journal of Yanshan University (Philosophy and Social Science Edition), 2012,12(4):102-108(in Chinese) [10] 黄小红,包振强,朱俊武,等.基于案例和规则的混合推理机制及其应用[J].扬州大学学报(自然科学版),2013,16(1):50-53 Huang X H, Bao Z Q, Zhu J W, et al. The mechanism and application of hybrid reasoning technology based on case and rule[J]. Journal of Yangzhou University (Natural Science Edition), 2013,16(1):50-53(in Chinese) [11] 崔凯.基于CBR的发动机智能设计的研究[D].济南:山东大学,2012 Cui K. Study on intelligent design of engine based on case-based reasoning[D]. Ji'nan:Shandong University, 2012(in Chinese) [12] Biswas S K, Sinha N, Purakayastha B, et al. Hybrid expert system using case based reasoning and neural network for classification[J]. Biologically Inspired Cognitive Architectures, 2014,9:57-70 [13] 《引信设计手册》编写组.引信设计手册[M].北京:国防工业出版社,1978 Fuze Design Handbook Writers. Fuze design handbook[M]. Beijing:National Defend Industry Press, 1978(in Chinese)
点击查看大图
计量
- 文章访问数: 262
- HTML全文浏览量: 42
- PDF下载量: 17
- 被引次数: 0