数控系统小线段平滑过渡算法的半硬件仿真与验证

高体红; 林立峰; 周凯汀; 郑力新

doi:10.13433/j.cnki.1003-8728.2016.0515

数控系统小线段平滑过渡算法的半硬件仿真与验证

doi: 10.13433/j.cnki.1003-8728.2016.0515

1.
华侨大学信息科学与工程学院, 厦门 361021;
2.
华侨大学工学院, 福建泉州 362021

基金项目:

福建省科技新平台建设项目(2013H2002)资助

详细信息

作者简介:
高体红(1988-),硕士研究生,研究方向为机器视觉、运动控制的研究,779562198@qq.com

通讯作者:
郑力新(联系人),教授,博士,zlx@hqu.edu.cn

计量
- 文章访问数: 190
- HTML全文浏览量: 36
- PDF下载量: 6
- 被引次数: 0
出版历程
- 收稿日期: 2014-05-29
- 刊出日期: 2016-05-05

Semi-hardware Simulation and Verification of a Small Line Smooth Transition Algorithm in Numerical Control System

1.
College of Information Science and Engineering, Huaqiao University, Xiamen 361021, China;
2.
College of Engineering, Huaqiao University, Fujian Quanzhou 362021, China

摘要

摘要: 为了满足数控系统中加工精度和速度的要求,提出了小线段平滑过渡算法。首先建立小线段平滑过渡的数学模型,并求取过渡圆弧参数和旋转方向;然后以加工平台的机械特性来限制其进给速度,采用半硬件仿真系统测试其运动轨迹,在误差允许的范围内,仿真轨迹与实验加工图形一致;最后搭建测试平台测试其运动速度,在保证加工精度和加工平台机械特性的情况下,该算法能够较大程度地提高加工效率。
- 数控系统 /
- 平滑过渡 /
- 过渡圆弧 /
- 半硬件仿真
Abstract: In order to meet the requirements of speed and accuracy in numerical control system, this paper presents a small line smooth transition algorithm. Firstly, we establish the mathematical model of the small line smooth transition and get the parameters and rotation direction of transition circular arc. Then, with the feed speed limited by mechanical property of processing platform, the numerical track acquired though the semi-hardware simulation system is consistent with the machining graphics with the errors permitted. And the velocity of the algorithm tested by the test platform is improved obviously under the guarantee of machining accuracy and mechanical material properties.
- mathematical model /
- numerical control system /
- semi-hardware simulation /
- smooth transition algorithm

HTML全文

参考文献(15)

[1]	孟书云,赵东标.复杂曲面上投影曲线的误差可控插补算法[J].机械科学与技术,2006,25(6):728-731 Meng S Y, Zhao D B. An error-controllable interpolation algorithm of projective curves on sculptured surfaces[J]. Mechanical Science and Technology, 2006,25(6):728-731 (in Chinese)
[2]	李方,李迪,黄昕.非均匀有理B样条在线拟合高速平滑插补法[J].华南理工大学学报(自然科学版),2010,38(8):61-65 Li F, Li D, Huang X. High-speed smoothing interpolation based on NURBS online fitting[J]. Journal of South China University of Technology (Natural Science Edition), 2010,38(8):61-65 (in Chinese)
[3]	Bedi S, Ali I, Quan N. Advanced interpolation techniques for N.C. machines[J]. Journal of Engineering for Industry, 1993,115(3):329-336
[4]	王太勇,赵巍,李宏伟,等.基于最小偏差法的步进电机速度控制方法研究[J].机械科学与技术,2005,24(6):699-701 Wang T Y, Zhao W, Li H W, et al. Research on control of stepper motor acceleration-deceleration based on minimum deflection algorithm[J]. Mechanical Science and Technology, 2005,24(6):699-701 (in Chinese)
[5]	叶佩青,赵慎良.微小直线段的连续插补控制算法的研究[J].中国机械工程,2004,15(15):1354-1356 Ye P Q, Zhao S L. Study on control algorithm for micro-line continuous interpolation[J]. China Mechanical Engineering, 2004,15(15):1354-1356 (in Chinese)
[6]	王宇晗,肖凌剑,曾水生,等.小线段高速加工速度衔接数学模型[J].上海交通大学学报,2004,38(6):901-904 Wang, Y H, Xiao L J, Zeng S S, et al. An optimal feedrate model and solution for high-speed machining of small line blocks with look-ahead[J]. Journal of Shanghai Jiaotong University, 2004,38(6):901-904 (in Chinese)
[7]	叶伟,王小椿.一种连续小线段高速插补算法[J].南京理工大学学报(自然科学版),2008,32(4):443-448 Ye W, Wang X C. Interpolation algorithm for high-speed machining of small line blocks[J]. Journal of Nanjing University of Science and Technology (Natural Science), 2008,32(4):443-448 (in Chinese)
[8]	冷洪滨,邬义杰,潘晓弘.三次多项式型微段高速自适应前瞻插补方法[J].机械工程学报,2009,45(6):73-79 Ling H B, Wu Y J, Pan X H. Adaptive prospective interpolation method for high speed machining of micro line blocks based on the cubic polynomial model[J]. Journal of Mechanical Engineering, 2009,45(6):73-79 (in Chinese)
[9]	唐伟,周以齐.用于加工高速弧面凸轮的直接插补技术研究[J].机械科学与技术,2006,25(2):139-141 Tang W, Zhou Y Q. Study of direct interpolation for machining a high-speed roller gear cam[J]. Mechanical Science and Technology, 2006,25(2):139-141 (in Chinese)
[10]	Huang J, Song A P, Tao J M, et al. Method of corner smooth transition based on interpolation spline[J]. Advanced Materials Research, 2013,655-657:1260-1266
[11]	沈斌,齐党进,樊留群,等.基于NURBS曲线拟合的微段高速自适应加工算法[J].中国机械工程,2012,23(15):1825-1829 Shen B, Qi D J, Fan L Q, et al. High-speed adaptive interpolation algorithm based on NURBS fitting for micro sections[J]. China Mechanical Engineering, 2012,23(15):1825-1829 (in Chinese)
[12]	何均,游有鹏,王化明.面向微线段高速加工的Ferguson样条过渡算法[J].中国机械工程,2008,19(17):2085-2089 He J, You Y P, Wang H M. A micro-line transition algorithm based on Ferguson spline for high speed machining (HSM)[J]. China Mechanical Engineering, 2008,19(17):2085-2089 (in Chinese)
[13]	Song A P, Huang J, Tao J M, et al. Describing NC smooth path based on the adjustable form of the cubic spline interpolation function[J]. Applied Mechanics and Materials, 2012,215-216:1158-1164
[14]	徐志明,冯正进,汪永生,等.连续微小路径段的高速自适应前瞻插补算法[J].制造技术与机床,2003,(12):20-23 Xu M Z, Feng Z J, Wang Y S, et al. High-speed adaptative look-ahead interpolation algorithm for continuous micro path sections[J]. Manufacturing Technology & Machine Tool, 2003,(12):20-23(in Chinese)
[15]	王绍棣,谢涛,王汝传,等.一种基于虚拟现实技术的分布式半实物仿真平台研究和实现[J].系统仿真学报,2001,13(3):381-384 Wang S L, Xie T, Wang R C, et al. Research and Realization of one distributed semsim platform based on virtual reality[J]. Journal of System Simulation, 2001,13(3):381-384 (in Chinese)