留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

复合材料工字梁铺层结构设计及强度研究

刘峰 张成雷 马佳 张春 唐庆如

刘峰, 张成雷, 马佳, 张春, 唐庆如. 复合材料工字梁铺层结构设计及强度研究[J]. 机械科学与技术, 2016, 35(4): 641-645. doi: 10.13433/j.cnki.1003-8728.2016.0426
引用本文: 刘峰, 张成雷, 马佳, 张春, 唐庆如. 复合材料工字梁铺层结构设计及强度研究[J]. 机械科学与技术, 2016, 35(4): 641-645. doi: 10.13433/j.cnki.1003-8728.2016.0426
Liu Feng, Zhang Chenglei, Ma Jia, Zhang Chun, Tang Qingru. Laminate Structure Design and Strength Analysis of I-beam Composite[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(4): 641-645. doi: 10.13433/j.cnki.1003-8728.2016.0426
Citation: Liu Feng, Zhang Chenglei, Ma Jia, Zhang Chun, Tang Qingru. Laminate Structure Design and Strength Analysis of I-beam Composite[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(4): 641-645. doi: 10.13433/j.cnki.1003-8728.2016.0426

复合材料工字梁铺层结构设计及强度研究

doi: 10.13433/j.cnki.1003-8728.2016.0426
基金项目: 

国家自然科学基金民航联合基金重点项目(U1233202)、民航局科技项目重大专项(MHRD201240)及中国民航飞行学院科学研究基金项目(CJ2013-02)资助

详细信息
    作者简介:

    刘峰(1977-),教授,博士,硕士生导师,研究方向为飞机结构与强度,复合材料结构设计与分析,lhjlf999@sohu.com

Laminate Structure Design and Strength Analysis of I-beam Composite

  • 摘要: 根据复合材料层合工字梁的结构特点,基于经典层合板理论和最大应力强度准则,用MATLAB软件编程设计了复合材料工字梁缘条和腹板的铺层结构。建立了基于工艺的3种工字梁铺层结构有限元模型,分析了静载荷作用下3种铺层结构的应力状态。给出了典型铺层的应力云图。计算了复合材料层合结构材料主方向应力,使用最大应力强度准则,给出了线性状态下3种不同铺层结构工字梁的极限载荷。有限元分析结果与经典层合板理论计算结果进行了对比。分析表明:1) 工字梁铺层采用内C形连接和L形连接时极限载荷高于理论设计载荷,外C形连接的极限载荷低于理论值,3种铺层方式极限载荷误差都在9%以内,与理论值基本吻合;2) 有限元分析结果显示初始损伤均发生在工字梁下缘条45°铺层中,损伤模式为基体断裂;3) 工字梁结构极限载荷主要取决于基体强度;4) 工字梁发生破坏的截面位于其固支端;5) 所建立的基于经典层合板理论的工字梁设计方法和工字梁有限元分析模型是正确可靠的。
  • [1] 刘峰,张成雷.含金属预埋件碳纤维层合板在单向拉伸载荷作用下的强度分析[J].宇航材料工艺,2012,42(6):24-28 Liu F, Zhang C L. Strength analysis of carbon fiber laminates with pre-embedded metal part under unidirectional tensile load[J]. Aerospace Materials & Technology, 2012,42(6):24-28 (in Chinese)
    [2] Dora J, Hinrichsen J. Material and technology developments for the A380[C]//Proceedings of the 22nd International SAMPE Europe Conference. 2001:123-134
    [3] Brosius D. Boeing 787 update[J]. High Performance Composites, 2007,15(3):56
    [4] 王亚妮,袁昌盛,孔德拴.复合材料工字梁结构分析[J].兵器材料科学与工程,2012,35(4):79-83 Wang Y N, Yuan C S, Kong D S. Structure analysis of composite laminated beam with I-section[J]. Ordnance Material Science and Engineering, 2012,35(4):79-83 (in Chinese)
    [5] 赵美英,陶梅贞.复合材料结构力学与结构设计[M].西安:西北工业大学出版社,2007:11-23 Zhao M Y, Tao M Z. Composite material mechanics and structure design[M]. Xi'an: Northwestern Polytechnical University Press, 2007:11-23 (in Chinese)
    [6] Stemple A D, Lee S W. A finite element model for Composite beams undergoing large deflection with arbitrary cross-sectional warping[J]. International Journal for Numerical Methods in Engineering, 1989,28(9):2143-2160
    [7] Minguet P, Dugundji J. Experiments and analysis for composite blades under large deflection part II: dynamic behavior[J]. AIAA Journal, 1990,28(9):1580-1588
    [8] Jeon S M, Cho M H, Lee I. Static and dynamic analysis of composite box beams using large deflection theory[J]. Computers & Structures, 1995,57(4):635-642
    [9] Liu S T, An X M, Jia H P. Topology optimization of beam cross-section considering warping deformation[J]. Structural and Multidisciplinary Optimization, 2008,35(5):403-411
    [10] Chapman S J. MATLAB programming for engineers[M]. 3 edition. Thomson Publishing Company, 2005:37-100
    [11] 马祖康.复合材料力学基础[M].西安:西北工业大学出版,1993:10-50 Ma Z K. Basic mechanics of composite materials[M]. Xi'an: Northwestern Polytechnical University Press, 1993:10-50 (in Chinese)
    [12] Rojas C A. Structural analysis of fiber reinforced composite materials[D]. The University of Texas at Arlington, 2006:20-31
    [13] Li R, Kelly D, Crosky A. Strength improvement by fibre steering around a pin loaded hole[J]. Composite Structures, 2002,57(1-4):377-383
    [14] 中国航空研究院.复合材料结构稳定性分析指南[M].北京:航空工业出版社,2002:5-9 China Aviation Institute. Composite materials guide structure stability analysis[M]. Beijing: Aviation Industry Press, 2002:5-9 (in Chinese)
    [15] 矫桂琼,贾普荣.复合材料力学[M].西安:西北工业大学出版社,2008:89-98 Jiao G Q, Jia P R. Mechanics of composite materials[M]. Xi'an: Northwestern Polytechnical University Press, 2002:5-9 (in Chinese)
    [16] Hart-Smith L J. Analysis and design of advanced composite bonded joints[Z]. NASA CR-2218, 1974
  • 加载中
计量
  • 文章访问数:  212
  • HTML全文浏览量:  26
  • PDF下载量:  16
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-05-16
  • 刊出日期:  2016-04-05

目录

    /

    返回文章
    返回