Experimental Study on Longitudinal-torsional Resonance Rotary Ultrasonic Face Milling of CFRP
-
摘要: 碳纤维复合材料加工中易产生分层、毛刺、撕裂等缺陷,是难加工材料。通过建立超声端铣碳纤维复合材料模型,分析两种角度下端铣碳纤维复合材料机理。采用纵扭共振旋转超声端铣和普通端铣碳纤维复合材料进行试验研究。试验结果表明:纵扭共振旋转超声端铣下,碳纤维复合材料已加工表面平整,刀具磨损少;而普通端铣条件下的已加工表面沟槽、凹坑较多,刀具磨损较大;超声端铣效果优于普通端铣。Abstract: The processing of carbon fiber reinforced composites(CFRP) is easy to produce layered, glitches, tearing and other defects. CFRP are difficult to machine. To establish a model for the ultrasonic face milling of CFRP is used to analyze the milling mechanism of CFRP under two kinds of angle. Experimental research was carried out for both the longitudinal-torsional resonance rotary ultrasonic face milling and the traditional face milling of CFRP. The experimental results showed that under the longitudinal-torsional resonance rotary ultrasonic milling conditions, CFRP surface has been processed was roughness, tool less wear. The grooves, pits were more on the processed under the conditions of normal face milling, tool seriously wear. Ultrasonic milling was better than ordinary milling.
-
Key words:
- CFRP /
- face milling /
- longitudinal-torsional resonance /
- ultrasonic
-
[1] 贺福,王茂章.碳纤维及其复合材料[M].北京:科学出版社,1997 He F, Wang M Z. Carbon fiber and composite materials[M]. Beijing: Science Press, 1997 (in Chinese) [2] 鲍永杰,高航.碳纤维复合材料构件加工缺陷与高效加工对策[J].材料工程,2009,(S2):254-259 Bao Y J, Gao H. Drilling disfigurements formation analysis and solution of CFRP[J]. Journal of Materials Engineering, 2009,(S2):254-259 (in Chinese) [3] 唐国翌,闫允杰,陈锡花,等.多向编织碳纤维复合材料的断裂及微观形貌[J].清华大学学报(自然科学版),1999,39(10):4-7 Tang G Y, Yan Y J, Chen X H, et al. Fracture mechanism and fracture morphology of multi-dimensional braided carbon fiber/epoxy resin composites[J]. Journal of Tsinghua University (Science and Technology), 1999,39(10):4-7 (in Chinese) [4] 任宇江.碳纤维复合材料的超声辅助磨削加工技术研究[D].大连:大连理工大学,2010 Ren Y J. Study on the ultrasonic assisted grinding technology of carbon fiber reinforced plastics[D]. Dalian: Dalian University of Technology, 2010 (in Chinese) [5] 陈雄兵.碳纤维复合材料旋转超声铣磨加工技术研究[D].大连:大连理工大学,2009 Chen X B. Study on the rotary ultrasonic milling and grinding of carbon fiber composite technology[D]. Dalian: Dalian University of Technology, 2009 (in Chinese) [6] 马俊金.C/C复合材料超声铣削机理研究[D].焦作:河南理工大学,2012 Ma J J. Research on the ultrasonic milling mechanism of C/C composites[D]. Jiaozuo: Henan University of Technology, 2012 (in Chinese) [7] Cong W L, Pei Z J, Deines T W, et al. Rotary ultrasonic machining of CFRP composites: a study on power consumption[J]. Ultrasonics, 2012,52(8):1030-1037 [8] Mori, Masaki, umehara, et al. Application of ultrasonic laser machining to laser deep-drilling technique[J]. Bulletin of the Japan Society of Precision Engineering, 1976,10(4):177-178 [9] Singh R, Khamba J S. Taguchi technique for modeling material removal rate in ultrasonic machining of titanium[J]. Materials Science and Engineering: A, 2007,460-461:365-369 [10] 张毅.超声振动铣削碳纤维复合材料刀具磨损研究[J].精密制造与自动化,2010,(2):13-15 Zhang Y. Tool wear research of ultrasonic vibration milling carbon fiber composites[J]. Precise Manafacturing & Automation, 2010,(2):13-15 (in Chinese) [11] 张伟,艾启兰,刁习,等.碳纤维复合材料切削后表面微观分析[J].大连轻工业学院学报,1999,18(3):242-246 Zhang W, Ai Q L, Diao R, et al. Microanalysis for the drilling cutting surface of the carbon fibre reinforced composite material[J]. Journal of Dalian Institute of Light Industry, 1999,18(3):242-246 (in Chinese) [12] 王晓博.碳纤维复合材料超声高速铣削技术研究[D].石家庄:河北科技大学,2012 Wang X B. Research on ultrasonic high-speed milling technology of carbon fiber reinforced composites[D]. Shijiazhuang: Hebei University of Science and Technology, 2012 (in Chinese) [13] 聂建武.金属切削与机床[M].西安:西安电子科技大学出版社,2006 Nie J W. Metal cutting and machine tools[M]. Xi'an: Xidian University Press, 2006 (in Chinese) [14] 高国富,马星辉,董小磊.超声振动铣削碳纤维复合材料表面特征研究[J].现代制造工程,2009,(9):86-89 Gao G F, Ma X H, Dong X L. Research on the surface characteristics in ultrasonic milling of CFRP[J]. Modern Manufacturing Engineering, 2009,(9):86-89 (in Chinese) [15] 皮钧,陈亚洲,张玉周.超声切削过程冲击接触特性的研究[J].中国工程机械学报,2013,11(3):239-242,251 Pi J, Chen Y Z, Zhang Y Z. Study on impact contact characteristics during ultrasonic cutting process[J]. Chinese Journal of Construction Machinery, 2013,11(3):239-242,251 (in Chinese) [16] 张厚江,陈五一,陈鼎昌.碳纤维复合材料切削机理的研究[J].航空制造技术,2004,(7):57-59 Zhang H J, Chen W Y, Chen D C. Study on cutting mechanism of carbon fibre reinforced plastics[J]. Aeronautical Manufacturing Technology, 2004,(7):57-59 (in Chinese)
点击查看大图
计量
- 文章访问数: 201
- HTML全文浏览量: 29
- PDF下载量: 8
- 被引次数: 0