四足除草机器人的ADAMS与MATLAB联合仿真

卢衷正; 戈振扬; 丁巍

doi:10.13433/j.cnki.1003-8728.2016.0309

四足除草机器人的ADAMS与MATLAB联合仿真

doi: 10.13433/j.cnki.1003-8728.2016.0309

1.
昆明理工大学现代农业工程学院, 昆明 650500

基金项目:

国家自然科学基金项目(60971115)资助

详细信息

作者简介:
卢衷正(1989-),硕士研究生,研究方向为农业除草机器人,1015822753@qq.com

通讯作者:
戈振扬,教授,博士,ge.27@kmust.edu.cn

计量
- 文章访问数: 454
- HTML全文浏览量: 56
- PDF下载量: 11
- 被引次数: 0
出版历程
- 收稿日期: 2014-04-07
- 刊出日期: 2016-03-05

Co-simulating Quadruped Weeding Robot Using ADAMS and MATLAB

1.
Faculty of Modern Agricultural Engineering, Kunming University of Science and Technology, Kunming 650500, China

摘要

摘要: 为进行非化学田间除草,设计了一种四足除草机器人。对该除草机器人进行虚拟样机建模和动力学仿真,目的是提高四足除草机器人设计的效率与可靠性。在ADAMS中建立四足除草机器人的机械动力学模型,并运用ADAMS与MATLAB/Simulink联合仿真技术对其参数进行控制中的参数整定。通过此方法,可以初步确定四足除草机器人在行走过程中的PID参数及所需要的驱动力。ADAMS和MATLAB/Simulink联合仿真方法面向多领域,仿真结果逼真并且接近实际系统,为四足除草机器人物理样机的研制提供依据,解决了传统设计过程中机械和控制系统不匹配问题。
- 四足除草机器人 /
- ADAMS /
- MATLAB /
- 联合仿真
Abstract: In order to weed without using chemicals, this paper designed a quadruped weeding robot. The virtual prototype model and dynamic simulation of the weeding robot was established, and the efficiency and reliability of the quadruped weeding robot were improved. After the mechanical dynamic model of the quadruped weeding robot was built with ADAMS, the ADAMS and MATLAB/Simulink co-simulation (coordinated simulation) technology was employed to set the parameters of the control system. With the method, the PID parameters and the driving force for the walking of the quadruped weeding robot are preliminarily determined. Because the ADAMS and MATLAB/Simulink co-simulation is multi-field oriented, the simulation results are approximate to reality and close to a real robot. This method paves the foundation for developing the physical prototype of a quadruped weeding robot and helps to solve the mismatching between a machine and its control system in traditional designs.
- ADAMS and MATLAB co-simulation /
- ADAMS /
- control system /
- quadruped weeding robot

HTML全文

参考文献(15)

[1]	李东升,张莲洁,盖志武,等.国内外除草技术研究现状[J].森林工程,2002,18(1):17-18 Li D S, Zhang L J, Gai Z W, et al. Research situations of weeding techniques in abroad and home[J]. Forest Engineering, 2002,18(1):17-18 (in Chinese)
[2]	李增刚.ADAMS入门详解与实例[M].北京:国防工业出版社,2006 Li Z G. ADAMS introductory explanation and example[M]. Beijing: National Defense Industry Press, 2006 (in Chinese)
[3]	段清娟,张锦荣,王润孝.基于虚拟样机技术的四足机器人结构设计[J].机械科学与技术,2008,27(9):1171-1174 Duan Q J, Zhang J R, Wang R X. Structural design of a quadruped robot by virtual prototyping technique[J]. Mechanical Science and Technology for Aerospace Engineering, 2008,27(9):1171-1174 (in Chinese)
[4]	郑浩峻,张秀丽.足式机器人生物控制方法与应用[M].北京:清华大学出版社,2011 Zheng H J, Zhang X L. Biologically-inspired motion control theory and its application for a legged-rob[M]. Beijing: Tsinghua University Press, 2011 (in Chinese)
[5]	张锦荣,王润孝.四足机器人的动力学分析与仿真[J].西安工程大学学报,2009,23(3):80-84 Zhang J R, Wang R X. Dynamic analysis and simulation on quadruped robot[J]. Journal of Xi'an Polytechnic University, 2009,23(3):80-84 (in Chinese)
[6]	马明,王建中,盛沙.基于虚拟样机技术的4足机器人机构设计[J].机械设计,2012,29(3):25-28 Ma M, Wang J Z, Sheng S. Mechanism design of quadruped robot based on virtual prototyping technology[J]. Journal of Machine Design, 2012,29(3):25-28 (in Chinese)
[7]	Wang S H, Jin Y, Liu X X, et al. Gait planning and simulation of the quadruped robot based on virtual prototype[C]//2012 Proceedings of International Conference on Modelling, Identification & Control (ICMIC). Wuhan: IEEE, 2012:316-321
[8]	杜志江,张博,孙立宁,等.基于虚拟样机技术的双足机器人运动仿真研究[J].系统仿真学报,2007,19(19):4454-4456 Du Z J, Zhang B, Sun L N, et al. Research on motion simulation of biped walking robot based on virtual prototype technology[J]. Journal of System Simulation, 2007,19(19):4454-4456 (in Chinese)
[9]	于薇薇,Sabourin C,Madani K,等.基于Adams和 Matlab联合仿真的双足机器人越障研究[J].计算机测量与控制,2008,16(11):1741-1743,1769 Yu W W, Sabourin C, Madani K, et al. Approach of biped robot to step over obstacle based on Adams and Matlab united simulation[J]. Computer Measurement & Control, 2008,16(11):1741-1743,1769 (in Chinese)
[10]	马如奇,郝双晖,郑伟峰,等.基于MATLAB与ADAMS的机械臂联合仿真研究[J].机械设计与制造,2010(4):93-95 Ma R Q, Hao S H, Zheng W F, et al. Research on coordinated simulation of robot arm based on MATLAB and ADAMS[J]. Machinery Design & Manufacture, 2010(4):93-95 (in Chinese)
[11]	史耀强,李建,顿向明,等.基于虚拟样机的双足机器人步行联合仿真[J].上海交通大学学报,2009,43(1):93-96,100 Shi Y Q, Li J, Dun X M, et al. Walking simulation of biped robot based on virtual prototype[J]. Journal of Shanghai Jiao Tong University, 2009,43(1):93-96,100 (in Chinese)
[12]	姚莉君,李成刚,张军.ADAMS与MATLAB 联合仿真在3自由度并联机构控制中的应用[J].机械设计,2012,29(5):31-35 Yao L J, Li C G, Zhang J. Application of ADAMS and MATLAB union simulation in control of 3 DOF parallel mechanism[J]. Journal of Machine Design, 2012,29(5):31-35 (in Chinese)
[13]	马宗利,李华,王建明,等.四足机器人结构设计与仿真分析[J].机械设计,2012,29(7):34-37,42 Ma Z L, Li H, Wang J M, et al. Quadruped robot design and simulation analysis[J]. Journal of Machine Design, 2012,29(7):34-37,42 (in Chinese)
[14]	阮鹏,俞志伟,张昊,等.基于 ADAMS的仿壁虎机器人步态规划及仿真[J].机器人,2010,32(4):499-504,509 Ruan P, Yu Z W, Zhang H, et al. Gait planning and simulation of gecko inspired robot based on ADAMS[J]. Robot, 2010,32(4):499-504,509 (in Chinese)
[15]	阮鹏.基于虚拟样机技术的仿壁虎机器人步态规划及运动仿真[D].南京:南京航空航天大学,2010 Ruan P. Gait design and kinematics of a gecko inspired robot based on virtual prototype technology[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010 (in Chinese)